Steels: microstructure and properties, Bhadeshia, Harry Honeycombe, Robert
Новое издание
Автор: Bhadeshia, H.k.d.h., Ph.d. (professor Of Physical Metallurgy, University Of Cambridge, Uk, And Adjunct Professor, Graduate Institute Of Ferrous Techno Название: Steels ISBN: 0443184917 ISBN-13(EAN): 9780443184918 Издательство: Elsevier Science Цена: 20212.00 р. Наличие на складе: Есть у поставщикаПоставка под заказ.
Старое издание
Автор: Harry Bhadeshia Название: Steels: Microstructure and Properties, ISBN: 0750680849 ISBN-13(EAN): 9780750680844 Издательство: Elsevier Science Цена: 14141.00 р. Наличие на складе: Поставка под заказ. Описание: Steels represent the most widely-used metallic alloy. This work covers the microstructure, mechanical behaviour and properties of steels. It includes chapters on nanostructured steels, and alloys and technologies for the energy and automobile industries. It also presents extensive bibliographies and real-life examples.
Автор: Madeleine Durand-Charre Название: Microstructure of Steels and Cast Irons ISBN: 3642058973 ISBN-13(EAN): 9783642058974 Издательство: Springer Рейтинг: Цена: 26120.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book comprises three parts. Part 2 is the core of the book and deals with the metallurgical basis of microstructures, with four main themes: phase diagrams, solidification processes, diffusion, and solid state phase transformations.
Описание: Introduction.- Influence of mould-metal interactions on the microstructure of castings - literature studies.- Mould sand system in foundry.- Methods of the mould sands quality assessment.- Reclamation of used mould sands.- The mould /casting interface phenomena.- General characteristic of the ductile and compacted graphite cast iron.- Influence of the technological parameters on the microstructure and quality of the castings surface.- Influence of the metal/mould processes on the mechanical parameters of the castings.- Model of the phenomena on the mould/casting interface.
Автор: Eric J. Mittemeijer Название: Thermochemical Surface Engineering of Steels, ISBN: 0857095927 ISBN-13(EAN): 9780857095923 Издательство: Elsevier Science Рейтинг: Цена: 32844.00 р. Наличие на складе: Поставка под заказ.
Описание: Thermochemical surface engineering significantly improves the properties of steels. Edited by two of the world`s leading authorities, this important book summarises the range of techniques and their applications. It covers nitriding, nitrocarburizing and carburizing.
Автор: Arunansu Haldar; Satyam Suwas; Debashish Bhattacha Название: Microstructure and Texture in Steels ISBN: 1447160037 ISBN-13(EAN): 9781447160038 Издательство: Springer Рейтинг: Цена: 48774.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Transformation Textures Associated with Steel Processing.- Mathematics of Crystallographic Texture in Martensitic and Related Transformations.- Structure and Strength of IF Steel After Large Strain Deformation.- The Coming of Grain Boundary Engineering in the 21st Century.- Control of Texture and Microstructure in Steels.- Texture Development in Low Carbon Sheet Steels for Automotive Application.- Texture and Microstructure Evolution at the Metal-Vapour Interface During Transformation Annealing in a Mn and Al Alloyed Ultra Low Carbon Steel.- Precipitation Behavior and Textural Evolution in Interstitial Free High Strength (IFHS) Steels.- Texture, Microstructure and Properties of Coatings on a few Industrially Produced Galvanized and Galvannealed Interstitial Free Steels.- Effects of Microalloying in Multi Phase Steels for Car Body Manufacture.- State-of-the-Science of High Manganese TWIP Steels for Automotive Applications.- Third Generation of AHSS: Microstructure Design Concepts.- Modeling.- Crystal Plasticity Based Modelling of Deformation Textures.- Simulation of Persistence Characteristics of Textures During Plastic Deformation.- DXRD and Its Applications Leading to New Modelling.- 3D Image-Based Viscoplastic Response with Crystal Plasticity.- Specialized Characterization Techniques.- Diffraction Techniques in Steel Research: An Overview.- Non-Contact Non-Destructive Measurement of Texture Using an Electro-Magnetic Acoustic Transducer (EMAT) Sensor.- Texture Transition in Steel ST37K, in situ Measurement at High Temperatures Using High-Energy X-rays.- Texture and Microstructure Development During Special Processes and Materials.- Ultra-fine Grain Materials by Severe Plastic Deformation: Application to Steels.- Development of Texture from the HAZ to Weldmetal Across the Fusion Boundary.- Evolution of Recrystallization Texture in AISI300 Series Austenitic Stainless Steels After Cold Rolling to Large Strain.- Deformation and Recrystallization Textures in Iron Aluminides.- Effect of Nanocrystallization on the Phase Stability of Al-Cu-Ti and Al-Cu-Nb Metallic Systems.- Contributory Papers.- Investigation of Microstructure Development During ?-?-? Phase Transformation in Steel by Using High Temperature in situ EBSD.- A New Flow Function to Model Texture Evolution in Symmetric and Asymmetric Rolling.- Microstructure and Texture Evolution During the Accumulative Roll Bonding of Pure Ni.- Microstructure of the Rust Formed on Si-Al Bearing Ultrafine-Grained Weathering Steel.- Microstructure Evolution in Three FCC Materials During Limited Dome Height Test.- The Facet Method for the Description of Yield Loci of Textured Materials.- The Hall-Petch Relationship in Interstitial-Free Steel Processed by Equal Channel Angular Extrusion.- Evolution of Crystallographic Texture During Equal Channel Angular Extrusion (ECAE) of (?+?) Brass.- Grain Growth in ECAE Processed Pure Magnesium.- Solidification Microstructure and Texture in Grain-Refined Titanium Alloys.- Effect of Intercritical Heat Treatment on the Abrasive Wear Behaviour of Plain Carbon Dual Phase Steel.
Автор: Baran Sarac Название: Microstructure-Property Optimization in Metallic Glasses ISBN: 331936538X ISBN-13(EAN): 9783319365381 Издательство: Springer Рейтинг: Цена: 14365.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: 1.General Introduction 1.1 Motivation and Scope of Complex Materials 1.2 An Overview of Metallic Glasses 1.3 Processing of Metallic Glasses 1.4 Mechanical Property Enhancement in MG Composites 1.5 References 2. Fabrication Methods of MG Artificial Microstructures 2.1 Metallic Glass Alloy Synthesis 2.2 Silicon Mold Fabrication 2.3 Fabrication Methods of Artificial Microstructures 2.4 Conclusions 2.5 References 3. Structural Characterization of Metallic Glasses 3.1 Formability Test 3.2 Thermal Analysis 3.3 Structural Analysis 3.4 Bend Test 3.4 Conclusions 3.5 References 4. Artificial Microstructure Approach 4.1 Objectives 4.2 Periodic Cellular Structures of Metallic Glasses 4.2.1 MG Cellular Structure Sample 4.2.2 In-Plane Compression Test 4.2.3 Euler Buckling Instability 4.2.4 Results and Discussion 4.2.4.1 Deformation Regions of MG Cellular Structures 4.2.4.2 Manipulation of Geometry 4.2.4.3 Cellular Structures of Different Materials 4.2.4.4 Energy Absorption Capacity 4.2.4.5 Microstructural Optimization 4.2.4.6 Embrittlement of MGs 4.2.4.7 Comparison with Numerical Simulations 4.2.4.8 Mechanical Characterization under Uniaxial Tension 4.2.4.9 Mechanical Characterization at Different Orientations 4.2.5 General Findings & Conclusions 4.3 Toughening Mechanisms in Metallic Glasses 4.3.1 Uniaxial Tensile Test 4.3.1.1 Effect of Pore Size 4.3.1.2 Effect of Morphology 4.3.1.3 Effect of Pore Spacing 4.3.1.4 Effect of Pore Shape 4.3.1.5 Effect of Material Type 4.3.1.6 Effect of Pore Number 4.3.1.7 Effect of Electroplating 4.3.1.8 Microscopic Analysis of the Deformation Mechanism 4.3.1.9 Mechanical Property Optimization through d/s 4.3.1.10 Comparison with Numerical and Empirical Models 4.3.1.11 Effect of Isothermal Annealing on Mechanical Properties 4.3.2 Investigation of MG Composites Using FEM Analysis 4.3.3 General Findings & Conclusions 4.4 References 5. General Conclusions and Outlook 5.1 General Conclusions 116 5.2 Push the Limit: 3D Metallic Glass Structures 5.3 Multiple Material Artificial Microstructures 5.4 Non-Periodic Cellular Structures & Flaw Tolerance 5.5 Algorithmic Topological Optimization 5.6 Fracture Toughness in MG Heterostructures 5.7 Other Application Fields of MG Heterostructures 5.8 References.
Автор: Baran Sarac Название: Microstructure-Property Optimization in Metallic Glasses ISBN: 3319130323 ISBN-13(EAN): 9783319130323 Издательство: Springer Рейтинг: Цена: 18284.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: 1.General Introduction 1.1 Motivation and Scope of Complex Materials 1.2 An Overview of Metallic Glasses 1.3 Processing of Metallic Glasses 1.4 Mechanical Property Enhancement in MG Composites 1.5 References 2. Fabrication Methods of MG Artificial Microstructures 2.1 Metallic Glass Alloy Synthesis 2.2 Silicon Mold Fabrication 2.3 Fabrication Methods of Artificial Microstructures 2.4 Conclusions 2.5 References 3. Structural Characterization of Metallic Glasses 3.1 Formability Test 3.2 Thermal Analysis 3.3 Structural Analysis 3.4 Bend Test 3.4 Conclusions 3.5 References 4. Artificial Microstructure Approach 4.1 Objectives 4.2 Periodic Cellular Structures of Metallic Glasses 4.2.1 MG Cellular Structure Sample 4.2.2 In-Plane Compression Test 4.2.3 Euler Buckling Instability 4.2.4 Results and Discussion 4.2.4.1 Deformation Regions of MG Cellular Structures 4.2.4.2 Manipulation of Geometry 4.2.4.3 Cellular Structures of Different Materials 4.2.4.4 Energy Absorption Capacity 4.2.4.5 Microstructural Optimization 4.2.4.6 Embrittlement of MGs 4.2.4.7 Comparison with Numerical Simulations 4.2.4.8 Mechanical Characterization under Uniaxial Tension 4.2.4.9 Mechanical Characterization at Different Orientations 4.2.5 General Findings & Conclusions 4.3 Toughening Mechanisms in Metallic Glasses 4.3.1 Uniaxial Tensile Test 4.3.1.1 Effect of Pore Size 4.3.1.2 Effect of Morphology 4.3.1.3 Effect of Pore Spacing 4.3.1.4 Effect of Pore Shape 4.3.1.5 Effect of Material Type 4.3.1.6 Effect of Pore Number 4.3.1.7 Effect of Electroplating 4.3.1.8 Microscopic Analysis of the Deformation Mechanism 4.3.1.9 Mechanical Property Optimization through d/s 4.3.1.10 Comparison with Numerical and Empirical Models 4.3.1.11 Effect of Isothermal Annealing on Mechanical Properties 4.3.2 Investigation of MG Composites Using FEM Analysis 4.3.3 General Findings & Conclusions 4.4 References 5. General Conclusions and Outlook 5.1 General Conclusions 116 5.2 Push the Limit: 3D Metallic Glass Structures 5.3 Multiple Material Artificial Microstructures 5.4 Non-Periodic Cellular Structures & Flaw Tolerance 5.5 Algorithmic Topological Optimization 5.6 Fracture Toughness in MG Heterostructures 5.7 Other Application Fields of MG Heterostructures 5.8 References.
Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service.
The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties--such as strength, corrosion resistance, durability and damage tolerance in multi-component materials--used for critical structural applications.
Автор: Wei Yan; Wei Wang; Yiyin Shan; Ke Yang; Wei Sha Название: 9-12Cr Heat-Resistant Steels ISBN: 3319148389 ISBN-13(EAN): 9783319148380 Издательство: Springer Рейтинг: Цена: 19591.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: With China becoming a major force in steel research and development, this book highlights the work of a group from the Chinese Academy of Sciences, led by the first four authors.
Автор: Wei Yan; Wei Wang; Yiyin Shan; Ke Yang; Wei Sha Название: 9-12Cr Heat-Resistant Steels ISBN: 3319365177 ISBN-13(EAN): 9783319365176 Издательство: Springer Рейтинг: Цена: 14365.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: With China becoming a major force in steel research and development, this book highlights the work of a group from the Chinese Academy of Sciences, led by the first four authors.
Автор: Sha, Wei Li, Na Название: Steels ISBN: 1447148711 ISBN-13(EAN): 9781447148715 Издательство: Springer Рейтинг: Цена: 22203.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book combines steels research and model development, including the application of modeling techniques in steels. Coverages structural engineering modeling and novel, prototype alloy steels such as heat-resistant steel and low nickel maraging steel.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
