Holistic Simulation of Geotechnical Installation Processes, Theodoros Triantafyllidis
Автор: Gregory B. Baecher Название: Reliability and Statistics in Geotechnical Engineering ISBN: 0471498335 ISBN-13(EAN): 9780471498339 Издательство: Wiley Рейтинг: Цена: 20742.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Risk and reliability analysis is an area of growing importance in geotechnical engineering, where many variables have to be considered. Statistics, reliability modelling and engineering judgement are employed together to develop risk and decision analyses for civil engineering systems.
Автор: Theodoros Triantafyllidis Название: Holistic Simulation of Geotechnical Installation Processes ISBN: 3319525891 ISBN-13(EAN): 9783319525891 Издательство: Springer Рейтинг: Цена: 20962.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Adaptive management evaluation of the SQBRC excavation.- Stress paths on displacement piles during monotonic and cyclic penetration.- Contribution to the non-Lagrangian formulation of geotechnical and geomechanical processes.- Experimental investigation of vibratory pile driving in saturated sand.- FE simulation of model tests on vibratory pile driving in saturated sand. - Some aspects of the boundary value problems for the cyclic deformation of soil.- Computer aided calibration, benchmarking and check-up of constitutive models for soils.- Simulation of cyclic loading conditions within fluid-saturated granular media.- Strategies to apply soil models directly as friction laws in soil structure interactions.- A zero elastic range hypoplasticity model for sand.- Cyclic response of natural onsoy clay.- Numerical investigations of the effects of dynamic construction processes on deep excavation walls.- Total and quasi-elastic strains due to monotonous and low-cycle loading by means of experimental and numerical element tests.- Constitutive model for viscous clays under the ISA framework.- Evaluating the performance of an ISA-hypoplasticity constitutive model on problems with repetitive loading.
Автор: Theodoros Triantafyllidis Название: Holistic Simulation of Geotechnical Installation Processes ISBN: 331937351X ISBN-13(EAN): 9783319373515 Издательство: Springer Рейтинг: Цена: 14365.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book examines in detail the entire process involved in implementing geotechnical projects, from a well-defined initial stress and deformation state, to the completion of the installation process. The individual chapters provide the fundamental knowledge needed to effectively improve soil-structure interaction models.
Автор: Th. Triantafyllidis Название: Holistic Simulation of Geotechnical Installation Processes ISBN: 3319181696 ISBN-13(EAN): 9783319181691 Издательство: Springer Рейтинг: Цена: 19591.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Holistic Simulation of Geotechnical Installation Processes
Автор: Look Название: Handbook of Geotechnical Investigation and Design Tables ISBN: 1138001392 ISBN-13(EAN): 9781138001398 Издательство: Taylor&Francis Рейтинг: Цена: 15312.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
This practical handbook of properties for soils and rock contains in a concise tabular format the key issues relevant to geotechnical investigations, assessments and designs in common practice. There are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions.
The initial chapters deal with the planning of the geotechnical investigation and the classification of the soil and rock properties, after which some of the more used testing is covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. The emphasis throughout is on application to practice.
This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses. It evolved from the need to have a "go to" reference book which has both breadth and depth of information to apply immediately to projects. To keep to a handbook size one has to compress/restrict details to a few key bullet points - but a comprehensive reference list provides the "appendix" for additional information if required. This 2nd edition keeps to that format but contains updated information and adjustments that take into account feedback received since initial publication.
Название: Risk and Reliability in Geotechnical Engineering ISBN: 1482227215 ISBN-13(EAN): 9781482227215 Издательство: Taylor&Francis Рейтинг: Цена: 39811.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Establishes Geotechnical Reliability as Fundamentally Distinct from Structural Reliability Reliability-based design is relatively well established in structural design. Its use is less mature in geotechnical design, but there is a steady progression towards reliability-based design as seen in the inclusion of a new Annex D on "Reliability of Geotechnical Structures" in the third edition of ISO 2394. Reliability-based design can be viewed as a simplified form of risk-based design where different consequences of failure are implicitly covered by the adoption of different target reliability indices. Explicit risk management methodologies are required for large geotechnical systems where soil and loading conditions are too varied to be conveniently slotted into a few reliability classes (typically three) and an associated simple discrete tier of target reliability indices. Provides Realistic Practical Guidance Risk and Reliability in Geotechnical Engineering makes these reliability and risk methodologies more accessible to practitioners and researchers by presenting soil statistics which are necessary inputs, by explaining how calculations can be carried out using simple tools, and by presenting illustrative or actual examples showcasing the benefits and limitations of these methodologies. With contributions from a broad international group of authors, this text: Presents probabilistic models suited for soil parameters Provides easy-to-use Excel-based methods for reliability analysis Connects reliability analysis to design codes (including LRFD and Eurocode 7) Maximizes value of information using Bayesian updating Contains efficient reliability analysis methods Accessible To a Wide Audience Risk and Reliability in Geotechnical Engineering presents all the "need-to-know" information for a non-specialist to calculate and interpret the reliability index and risk of geotechnical structures in a realistic and robust way. It suits engineers, researchers, and students who are interested in the practical outcomes of reliability and risk analyses without going into the intricacies of the underlying mathematical theories.
Автор: Fenton Название: Risk Assessment in Geotechnical Engineering ISBN: 0470178205 ISBN-13(EAN): 9780470178201 Издательство: Wiley Рейтинг: Цена: 20592.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: When Volkswagen launched the Golf GTI, over thirty years ago, it could hardly have known the impact its compact and sporty model would have on the car-buying public. Through an uncertain birth to its class-topping iconic status of today, rarely does a new model of car make a whole new market segment for itself but the Golf was the original hot hatch, a car that others would copy but seldom equal.
Автор: Lancellotta, Renato Название: Geotechnical engineering ISBN: 0415420040 ISBN-13(EAN): 9780415420044 Издательство: Taylor&Francis Рейтинг: Цена: 9645.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This rigorous textbook covers applied mechanics, testing and experimentation, and methods for observing real structures. It includes classic soil mechanics topics such as boundary value problems and serviceability of structures and extends into the principles of continuum mechanics, critical state theory and innovative techniques such as seismic methods.
Автор: Th. Triantafyllidis Название: Holistic Simulation of Geotechnical Installation Processes ISBN: 3319387014 ISBN-13(EAN): 9783319387017 Издательство: Springer Рейтинг: Цена: 14365.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Effects of Soil Deposition on the Initial Stress State in Model Tests Experimental Results and FE Simulation.- Demonstrator Experiments on Significant Effects During Pile Installation.- On Soil Deformation and Stress Redistribution Around Pressed-in and Vibrated Displacement Pile Tips.- Modelling of Soil Structure Interaction by Applying a Hypoplastic Material Behaviour within Mortar Contact Formulation.- Vibro-Injection Pile Installation in Sand: Part I - Interpretation as Multi-Material Flow.- Vibro-Injection Pile Installation in Sand: Part II - Numerical and Experimental Investigation.- Numerical Modelling of the Effective-stress Evolution in Saturated Soilaround a Vibrating Pile Toe.- A Numerical Approach to the Solution of Dynamic Boundary Value Problems for Fluid-Saturated Solids.- Neohypoplasticity - Estimation of Small Strain Stiffness.- Improved Integration of High-cycle Accumulated Strain Using Hierarchicaland EAS Finite Elements.- Simulation of Soils under Rapid Cyclic Loading Conditions.- Experimental Strain Response-Envelopes of Granular Materials for Monotonous and Low-Cycle Loading Processes.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
