Dynamic Behavior of Materials, Volume 1, Bo Song; Daniel Casem; Jamie Kimberley
Автор: Meyers Название: Mechanical Behavior of Materials ISBN: 0521866758 ISBN-13(EAN): 9780521866750 Издательство: Cambridge Academ Рейтинг: Цена: 8869.00 р. 12670.00-30% Наличие на складе: Есть (1 шт.) Описание: A balanced mechanics-materials approach and coverage of the latest developments in biomaterials and electronic materials, this a thorough and modern textbook for upper-level undergraduates. The fundamental mechanisms at micro- and nano-meter level are presented across a wide-range of materials, with mathematical simplicity and a conceptual focus.
Автор: Tom Proulx Название: Dynamic Behavior of Materials, Volume 1 ISBN: 1461428297 ISBN-13(EAN): 9781461428299 Издательство: Springer Рейтинг: Цена: 39182.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Dynamic Material Property Characterization With Kolsky Bars.- Dynamic Triaxial Test on Sand.- Mechanically Similar Gel Simulants for Brain Tissues.- Loading Rate Effect on Tensile Failure Behavior of Gelatins Under Mode I.- On Failure and Dynamic Performance of Materials.- In-situ Optical Investigations of Hypervelocity Impact Induced Dynamic Fracture.- A Dynamic CCNBD Method for Measuring Dynamic Fracture Parameters.- New ""Fish Tank"" Approach to Evaluate Durability and Dynamic Failure of Marine Composites".- Large Field Photogrammetry Techniques in Aircraft and Spacecraft Impact Testing.- Properties of Elastomer-based Particulate Composites.- Dynamic-tensile-extrusion Response of Polytetrafluoroethylene (PTFE) and Polychlorotrifluoroethylene (PCTFE).- Dynamic Compression of an Interpenetrating Phase Composite (IPC) Foam: Measurements and Finite Element Modeling.- Improved Mechanical Properties of Nano-nickel Strengthened Open Cell Metal Foams.- A Numerical and Experimental Study of High Strain-rate Compression and Tension Response of Concrete.- Impact Behavior and Dynamic Failure of PMMA and PC Plates.- Experimental Investigation on Dynamic Crack Propagation Through Interface in Glass.- Effect of Temperature and Crack Tip Velocity on the Crack Growth in Functionally Graded Materials.- Characterization of Polymeric Foams Under Muli-axial Static and Dynamic Loading.- Effects of Fiber Gripping Methods on Single Fiber Tensile Test Using Kolsky Bar.- Mechanical Behavior of A265 Single Fibers.- Experimental Study of Dynamic Behavior of Kevlar 49 Single Yarn.- Dynamic Response of Fiber Bundle Under Transverse Impact.- Impact Experiments to Validate Material Models for Kevlar KM2 Composite Laminates.- Numerical Study of Composite Panels Subjected to Underwater Blasts.- Non-shock Initiation Model for Explosive Families-Experimental Results.- Modeling for Non-shock Initiation.- Stress and Strain Analysis of Metal Plates With Holes.- Impact Response of PC/PMMA Composites.- Performance of Polymer-steel Bi-layers Under Blast.- The Blast Response of Sandwich Composites With a Functionally Graded Core and Polyurea Interlayer.- The Blast Response of Sandwich Composites With In-plane Pre-loading.- Laboratory Blast Simulator for Composite Materials Characterization.- Experimental Characterization of Composite Structures Subjected to Underwater Impulsive Loadings.- Controlling Wave Propagation in Solids Using Spatially Variable Elastic Anisotropy.- Constitutive Characterization of Multi-constituent Particulate Composites.- Dynamic Strain Rate Response With Changing Temperatures for Wax-coated Granular Composites.- Strain Solitary Waves in Polymeric Nanocomposites.- Measurement of High-strain-rate Strength of a Metal-matrix Composite Conductor.- A Revisit to High-rate Mode-II Fracture Characterization of Composites With Kolsky Bar Techniques.- The Influences of Residual Stress in Epoxy Carbon-fiber Composite Under High Strain-rate.- Strain Rate-dependent and Temperature- dependent Compressive Properties of 2DCf/SiC Composite.- Compression Behavior of Near-UFG AZ31 Mg-Alloy at High Strain Rates.- Dynamic Torsion Properties of Ultrafine Grained Aluminum.- Effect of Aging Treatment on Dynamic Behavior of Mg-Gd-Y Alloy.- Plasticity Under Pressure Using a Windowed Pressure-shear Impact Experiment.- The Effect of Tungsten Additions on the Shock Response of Tantalum.- Stress Perturbations Caused by Longitudinal Stress Gauges.- Measuring Strength at Ultrahigh Strain Rates.- Shear Stress Measurements in Stainless Steel 2169 Under 1D Shock Loading.- Spall Strength of AS800 Silicon Nitride Under Combined Compression and Shear Impact Loading.-Spallation of 1100-O Aluminum Under Plate Impact Loading.- Line VISAR and Post-shot Metallography Comparisons for Spall Analysis.- Failure of Firefighter Escape Rope Under Dynamic Loading and Elevated Temperatures.- Determination of True Stress-true Strain Curves of Auto-body Plastics.- El
Автор: Tom Proulx Название: Dynamic Behavior of Materials, Volume 1 ISBN: 146142903X ISBN-13(EAN): 9781461429036 Издательство: Springer Рейтинг: Цена: 39182.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Dynamic Behavior of Materials represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011.
Автор: Vijay Chalivendra; Bo Song; Daniel Casem Название: Dynamic Behavior of Materials, Volume 1 ISBN: 1493953753 ISBN-13(EAN): 9781493953752 Издательство: Springer Рейтинг: Цена: 43100.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Correlation of Structural Strain to Tip Vorticity and Lift for a MAV Pliant Membrane Wing.- Deformation Mapping at the Microstructural Length Scale.- Molecular Tailoring of Interfacial Adhesion Using Self-assembled Monolayers.- Micromechanical Characterization of Ductile Damage in DP Steel.- MEMS Device for Fatigue Testing 25 Micrometer Thick Aluminum Specimens.- High Confidence Level Calibration for AFM Based Fracture Testing of Nanobeams.- High Strain Rate Characteristics of Fiber Bragg Grating Strain sensors.- Dynamic Shape and Strain Measurements of Rotating Tire in Time-series.- Measurement of Metallic Adhesion Force-to-Elongation Profile Under High Separation-Rate Conditions.- Prediction of Constraint Parameters Along the 3D Crack Front Under Negative Biaxial Loadings.- Role of Viscoelasticity in Predicting the Shape Memory Effect of Polymers.- Damage Assessment in Syracuse Limestone Specimens by Frequency Analysis of Elastic Emissions.- Photogrammetry Measurements During a Tanking Test on the Space Shuttle External Tank, ET-137.- Experimental, Numerical and Analytical Evaluation of Structural Integrity of Experiment Container Subjected to Reduced Gravity Flight Testing.- Use of Fiber Bragg Grating Strain Gages on a Pipeline Specimen Repaired With a CFRE Composite System.- Microstructure in the FSW Butt Joint of Aluminum Alloy AA5083.- Load History Dependency of Plastic Collapse Behavior of Cracked Piping.- Production of Metal Matrix Composites Using Thixinfiltration Techniques.- Review of Methods for Determining Residual Stresses in Biological Materials.- A Comparison of Residual Stress Measurements on Linear Friction Welds Using the Contour Method and Neutron Diffraction.- Experimental Study of High Speed Ball End milling of Titanium Alloy (Ti-6Al-4V).- Very High-cycle Fatigue Resistance of Shot Peened High-strength Aluminum Alloys.- The Application of the Combined Creep and Rate-independent Plasticity Model to Turbine Components Life Prediction.- Modified Constitutive Relation Error Strategy for Elastic Properties Identification.- Identification of the Anisotropic Plastic Behaviour of Sheet Metals at Large Strains.- Cohesive Zone Law Extraction From an Experimental Peel Test.- Application of a New Experimental Method to Determine Bi-material Interface Bonding Strength.- Calibration of Barkhausen Noise for Residual Stress Measurement.- Film Residual Stress Assessment Method via Temporarily Thermal Relaxation.- Determining Residual Stresses With the Aid of Optical Interference Techniques.- Interfacial Fracture Toughness and Residual Stress of Thermally Sprayed Coatings.- Design of Ultrasonic Probe Configuration Using Finite-difference Time Domain Simulation.- Absorbed vs. Released Energy in the Cracking Process of Heterogeneous Materials Under Compression.- Detailed Measurements of Thread Deformation and Failure in Thin Walled Aluminum Alloy Joints.- Experimental Characterization of Integral Invariants in Wood Specimen Using the full Field Optical Technique.- Stress intensity factors for viscoelastic axisymmetric problems applied to wood.- Simulation of Interference Fitted Joint Strength as Used in Hot Rolling Work Rolls.- Modelling of Nosing for the Assembly of Aerospace Bearings.- Multi-axial Quasi-static Strength of a Clinched Sheet Metal Assembly.- Simplified Calculation Method of the Torsion Effect on the Seismic Behavior of Timber Buildings.- Experimental Analysis of the Semi-rigidity Joint in the Standardized Timber Beam.- Nano-Macro Correlation of Nano-Silica Concrete.- Experimental results of green wood slice under natural drying.- Structural Health Monitoring in the Area of Coal Exploitation.- Thickness Effect on Cross-ply GLARE 5 FML Beams Subjected to Ballistic Impact.- Hole-drilling Residual Stress Measurement in an Intermediate Thickness Specimen.- Effects of Strain's Error on Residual Stresses Calculated by HDM.- Hole-drilling Residual Stress Measurement With Artifact Correction Using Fu
Автор: Bo Song; Dan Casem; Jamie Kimberley Название: Dynamic Behavior of Materials, Volume 1 ISBN: 3319376241 ISBN-13(EAN): 9783319376240 Издательство: Springer Рейтинг: Цена: 27950.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Dynamic Deformation Behavior of AA2099-T8 Under Compression and Torsion Loads.- High Strain Rate Performance of Pressureless Sintered Boron Carbide.- Interpretation of Strain Rate Effect of Metals.- High Strain Rate Friction Response Of Porcine Molar Teeth And Temporary Braces.- Dynamics of Interfaces with Static Initial Loading.- Loading Rate Effects on Mode I Delamination of Z-pinned Composite Laminates.- Multi-scale Testing Techniques for Carbon Nanotube Augmented Kevlar.- Single Fiber Tensile Properties Measured by the Kolsky bar Using the Direct Fiber Clamping Method.- A Testing Technique for Characterizing Composite at Strain Rates up to 100/s.- A New Technique of Dynamic Spherical Indentation Based on SHPB.- Analysis and Simulations of Quasi-static Torsion Tests on Nearly Incompressible Soft Materials.- Damage of Rubber Foams During Large Cyclic Compression.- Extreme Tensile Damage and Failure in Glassy Polymers via Dynamic-tensile-extrusion.- Strain Rate and Temperature Dependence in PVC.- Strain Rate Dependence of Yield Condition of Polyamide 11.- Effect of Strain Rate on Mechanical Response of PBX Simulants.- Effect of Loading Rate on Dynamic Fracture Toughness of Polycarbonate.- Mixed Mode Fracture Behavior of Layered Plates.- Failure Analysis of Micron Scaled Silicon Under High Rate Loading.- Dynamic fracture analysis of Semi-circular Bending (SCB) Specimen by the Optical Method of Caustics.- Effect of Loading Rate on Dynamic Fracture Behavior of Glass and Carbon Fiber Modified Epoxy.- Application of Element Free Galerkin Method to High Speed Crack Propagation Analysis.- Improving Ballistic Fiber Strength: Insights From Experiment and Simulation.- Simulating Wave Propagation in SHPB With Peridynamics.- Investigation of Dynamic Failure of Metallic Adhesion: A Space-technology Related Case of Study.- Shock Wave Profile Effects on Dynamic Failure of Tungsten Heavy Alloy.- Adhesively Joined Crush Tube Structures Subjected to Impact Loading.- Dynamic Buckling of Submerged Tubes due to Impulsive External Pressure.- High Strain Rate Response of Layered Micro Balloon Filled Aluminum.- Dynamic Triaxial Compression Experiments on Cor-Tuf Specimens.- Deceleration-displacement Response for Projectiles That Penetrate Concrete Targets.- Dynamic Fracture and Impact Energy Absorption Characteristics of PMMA-PU Transparent Interpenetrating Polymer Networks (IPNs).- Estimating Statistically-distributed Grain-Scale Material Properties From Bulk-Scale Experiments.- Spall Behavior of Cast Iron with Varying Microstructures.- A Scaling Law for APM2 Bullets and Aluminum Armor.- A Novel Torsional Kolsky Bar for Testing Materials at Constant-shear-strain-rates.- A Method for Dynamic Fracture Toughness Determination Using Torsion Hopkinson Pressure bar.- Characterization of Sheet Metals in Shear Over a Wide Range of Strain Rates.- Material Identification of Blast Loaded Aluminum Plates Through Inverse Modeling.- Implosion of a Tube Within a Closed Tube: Experiments and Computational Simulations.- Testing Techniques for Shock Accelerometers below 10,000 g.- ONR MURI Project on Soil Blast Modeling and Simulation.- Dynamic Behavior of Saturated Soil under Buried Explosive Loading.- A Near Nose Investigation of a Sand Penetration Event.- Poncelet Coefficients of Granular Media.- Effect of Moisture on the Compressive Behavior of Dense Eglin Sand Under Confinement at High Strain Rates.- Shearing Rate Effects on Dense Sand and Compacted Clay.- High-energy Diffraction Microscopy Characterization of Spall Damage.- Quantitative Visualization of High-rate Material Response with Dynamic Proton Radiography.- Investigation of Dynamic Material Cracking With In Situ Synchrotron-based Measurements.- Impact Bend Tests Using Hopkinson Pressure Bars.- A Methodology for In-Situ FIB/SEM Tension Testing of Metals.- Characterization of Damage Evolution in Ti2AlC and Ti3SiC2 Under Compressive Loading.- Viscoelastic Behaviour of Maturating Green
Автор: Hosford Название: Mechanical Behavior of Materials ISBN: 0521195691 ISBN-13(EAN): 9780521195690 Издательство: Cambridge Academ Рейтинг: Цена: 14890.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This is a textbook on the mechanical behavior of materials for mechanical and materials engineering. It emphasizes quantitative problem solving. This new edition includes treatment of the effects of texture on properties and microstructure, on discontinuous and inhomogeneous deformation, and treatment of foams.
Описание: This book offers in-depth insights into the photochemical behavior of multicomponent polymeric-based materials, with a particular emphasis on the photodegradation and photostabilization of these materials. Studying various classes of materials bases such as polysaccharides, wood, synthetic polymers, rubber blends, and nanocomposites, it offers a valuable reference source for graduate and postgraduate students, engineering students, research scholars and polymer engineers working in industry.
Описание: This book covers a variety of topics in mechanics, with a special emphasis on material mechanics. It reports on fracture mechanics, fatigue of materials, stress-strain behaviours, as well as transferability problems and constraint effects in fracture mechanics. It covers different kind of materials, from metallic materials such as ferritic and austenitic steels, to composites, concrete, polymers and nanomaterials. Additional topics include heat transfer, quality control and reliability of structures and components. Furthermore, the book gives particular attention to new welding technologies such as STIR welding and spray metal coating, and to novel methods for quality control, such as Taguchi design, fault diagnosis and wavelet analysis. Based on the 2015 edition of the Algerian Congress of Mechanics (Congr?s Alg?rien de M?canique, CAM), the book also covers energetics, in terms of simulation of turbulent reactive flow, behaviour of supersonic jet, turbulent combustion, fire induced smoke layer, and heat and mass transfer, as well as important concepts related to human reliability and safety of components and structures. All in all, the book represents a complete, practice-oriented reference guide for both academic and professionals in the field of mechanics.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
