6th International Symposium on High-Temperature Metallurgical Processing, Tao Jiang; Jiann-Yang Hwang; Gerardo Alvear; Onura

Автор: Jiann-Yang Hwang; Tao Jiang; Mark William Kennedy;
Название: 8th International Symposium on High-Temperature Metallurgical Processing
ISBN: 3319513397 ISBN-13(EAN): 9783319513393
Издательство: Springer
Рейтинг:
Цена: 34937.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This collection features contributions covering the advances and developments of new high-temperature metallurgical technologies and their applications to the areas of: processing of minerals;

Автор: Jiann-Yang Hwang; Tao Jiang; Chris Pistorius; Gera
Название: 7th International Symposium on High-Temperature Metallurgical Processing
ISBN: 3319486179 ISBN-13(EAN): 9783319486178
Издательство: Springer
Рейтинг:
Цена: 30606.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: Flash Reduction of Magnetite and Hematite Concentrates with Hydrogen in a Lab-Scale Reactor for a Novel Ironmaking Process.- Investigation of Coal Tar Pitch Binder for the Production of Formed Coal Briquettes for COREX from High Volatile Coal Powder.- Upgrading of Iron-Rich Titanium Minerals Using a Molten Salt Process.- Direct Electrolytic Production of Mo-Si-Ti-C Composites from Their Oxides/Sulfide/Carbon Mixture Precursor in Molten Salt.- Reduction Kinetics of Magnetite Concentrate Particles with H2 + CO at 1200 to 1600 C Relevant to a Novel Ironmaking Process.- Advanced Oxygen Lances for Safer Furnace Tapping Operations.- Utilization of Pine Nut Shell for Preparation of High Surface Area Activated Carbon by Microwave Heating and KOH Activation.- Research on High Temperature Mechanical Properties of 50Cr5MoV Roll Steel.- Separation of Rhenium and Molybdenum from Molybdenite Concentrate by Microwave-Assisted Roasting.- Active Oxidation and Fume Formation from Liquid SiMn.- Research on Enrichment of MFe and RO Phase from Converter Steel Slag by Super Gravity.- Volatilization of Rhenium from Molybdenite Concentrate by Oxidative Roasting.- Kinetic Investigation of the Electric Furnace Copper Slag Treatment.- The Extraction of Zinc from Willemite by Calcified-Roasting and Ammonia-Leaching Process Based on Phase Reconstruction.- An Investigation on Antimony Production by Using Niederschlag Process.- Oxygen-Rich Side Blow Bath Smelting Technology - New Developments in China.- Carbon Refractories in an Oxidizing Process? Copper Smelting in an Outotec(R) Ausmelt TSL Furnace with a UCAR(R) ChillKote(TM) Refractory System.- Enrichment of Gold in Low Grade Copper Matte from Arsenical Refractory Gold Concentrate via Matte Smelting Method.- Zinc and Refractories - A Nasty Relation.- Preliminary Study on Preparation of Al-Sc Master Alloy in Na3AlF6-K3AlF6-AlF3 Melt.- Effect of the Reductants on the Production of Iron Based Alloys from Mill Scale by Metallothermic Process.- Experimental Study on Iron-Based Alloy as Cladding Layer-Improving High Temperature Oxidation Resistance of Furnace Alloy.- Production of FeMn Alloys with Heat Treated Mn-Nodules.- Thermodynamic Analysis and Experiments on Vacuum Separation of Sn-Sb Alloy.- Simulation of Solidification Microstructure of 30Cr2Ni4MoV Steel Ingot under Different Intensities of Mechanical Oscillation.- Production of ZrB2-B4C Composite Materials via SHS Process.- Research on Microwave Roasting of ZnO and Application in Photocatalysis.- Reduction Kinetics of Hematite Concentrate Particles by CO+H2 Mixture Relevant to a Novel Flash Ironmaking Process.- SO3 Formation in Copper Smelting Process: Thermodynamic Consideration.- Effect of Oxidation on Wetting Behavior between Silicon and Silicon Carbide.- Effect of CaO/SiO2 and P2O5 on the Viscosity of FeO-SiO2-V2O3-CaO-P2O5 Slags.- Heat Losses to Furnace Coolers as a Function of Process Intensity.- Viscosity of Partially Crystallized BOF Slag.- Origin and Evolution of Non-Metallic Inclusions for Al-Killed Steel during EAF-LF-VD-CC Process.- The Dynamic Dissolution of Coke with Slag in Melting and Dropping Zone.- Research on Oxidation Kinetics of SPHC Steel at 500 900 C.- Experiment Research on Direct Reduction of Celestine by Rotary Hearth Furnace Process.- Influence of Slag Basicity on the Silicon Within the Stainless Steel Master Alloy Prepared by Smelting Reduction of Fe-Ni-Cr Sinters.- Reduction Behavior of Chromic Oxide in Ti-Bearing BF Slag.- Effects of Mineral Oxides on the Precipitation Micro-Morphology of Metallic Iron in the Reduction of Iron Oxides Under CO Atmosphere.- Influence of Operation Parameters on Mass Fraction of Sulfur in the Hot Metal in COREX Process.- Influence of Operation Parameters on Sticking Behavior of Pellets in CO

Автор: Yin, Ruiyu
Название: Metallurgical Process Engineering
ISBN: 3642139558 ISBN-13(EAN): 9783642139550
Издательство: Springer
Рейтинг:
Цена: 26122.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: Metallurgical Process Engineering discusses large-scale integrated theory on the level of manufacturing production processes, putting forward concepts for exploring non-equilibrium and irreversible complex system. It emphasizes the dynamic and orderly operation of the steel plant manufacturing process, the major elements of which are the flow, process network and program. The book aims at establishing a quasi-continuous and continuous process system for improving several techno-economic indices, minimizing dissipation and enhancing the market competitiveness and sustainability of steel plants. The book is intended for engineers, researchers and managers in the fields of metallurgical engineering, industrial design, and process engineering. Prof. Ruiyu Yin is honorary president of the Central Iron and Steel Research Institute, China, and a member of the Chinese Academy of Engineering.

Автор: R. Rohde
Название: Metallurgical Effects at High Strain Rates
ISBN: 1461586984 ISBN-13(EAN): 9781461586982
Издательство: Springer
Рейтинг:
Цена: 18284.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: A conference on Metallurgical Effects at High Strain Rates was held at Albuquerque, New Mexico, February 5 through 8, 1973, under joint sponsorship of Sandia Laboratories and the Physical Metallurgy Committee of The Metallurgical Society of AIME.