CAD Geometry Data Exchange Using STEP, Helmut J. Helpenstein

Автор: Knox
Название: CAD/CAM Systems Planning and Implementation
ISBN: 0824770412 ISBN-13(EAN): 9780824770419
Издательство: Taylor&Francis
Рейтинг:
Цена: 30624.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This book identifies as many "alligators" as possible in the swamps surrounding implementation of an integrated CAD/CAM system. It is helpful for marketing managers, inventory control supervisors and innovators who believe in the need to modernize engineering and manufacturing systems.

Автор: Knox
Название: Engineering Documentation for CAD/CAM Applications
ISBN: 0824770897 ISBN-13(EAN): 9780824770891
Издательство: Taylor&Francis
Рейтинг:
Цена: 33686.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This book emphasizes the importance of consistent, well-planned, and computer-oriented engineering documentation systems to engineering, manufacturing, and accounting. It discusses the systems needed to optimize flow of information and increase the efficiency of modern CAD/CAM systems.

Автор: E.G. Schlechtendahl
Название: Specification of a CAD * I Neutral File for CAD Geometry
ISBN: 3540503927 ISBN-13(EAN): 9783540503927
Издательство: Springer
Рейтинг:
Цена: 14673.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: ESPRIT Project 322, "CAD Interfaces", has been established to define the most important interfaces in CAD/CAM systems for data exchange, data base, finite element analysis, experimental analysis, and advanced modeling. The definitions of these interfaces are being elaborated in harmony with international standardization efforts in this field. One principal goal of the project is to develop techniques for the exchange of CAD information between CAD systems, and from the CAD domain to CAA (Computer Aided Analysis) and CAM (Computer Aided Manufacturing). This volume presents a proposal for a neutral file format for CAD data: curves, surfaces, and solids. The specification is based on a reference schema for CAD data bases and is defined informally with respect to its semantics and formally with respect to its syntax. This volume is a revised edition of "Specification of a CAD*I Neutral File for Solids" Version 3.2. The revision reflects the enhancements which result from the implementation of communication processors in eight different CAD systems and from the practical exchange of solid models between these systems. Due to the close interaction between the CAD*I project and the coming-up international standard STEP this specification also serves as an introduction to the geometry model that will be included in the future international standard.

Автор: J. Encarnacao; R. Schuster; E. V?ge
Название: Product Data Interfaces in CAD/CAM Applications
ISBN: 3642824285 ISBN-13(EAN): 9783642824289
Издательство: Springer
Рейтинг:
Цена: 14673.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Автор: E.G. Schlechtendahl
Название: CAD Data Transfer for Solid Models
ISBN: 3540518266 ISBN-13(EAN): 9783540518266
Издательство: Springer
Рейтинг:
Цена: 14673.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: Edited for Working Group 2 (WG 2): Bayerische Motorenwerke AG. Cisigraph. Cranfield Institute of Technology. Danmarks Tekniske Hojskole. Kernforschungszentrum Karlsruhe GmbH. NEH Consulting Engineers ApS. Universitat Karlsruhe.

Автор: Intergraph GmbH; Ulrich Sendler
Название: CAD & Office Integration
ISBN: 3540602925 ISBN-13(EAN): 9783540602927
Издательство: Springer
Рейтинг:
Цена: 13974.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: In the realm of CAD & Office Integration a new technology has been introduced that will overturn many accepted ideas, both for developer and end-user. Furthermore this "plug and play" CAD technology makes it possible to use older CAD documents and older software in an entirely new context.

Автор: Birendra Prasad
Название: CAD/CAM Robotics and Factories of the Future
ISBN: 3642523250 ISBN-13(EAN): 9783642523250
Издательство: Springer
Рейтинг:
Цена: 6986.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This volume is about automation - automation in design, automation in manufacturing, and automation in production. We choose to call such automation, knowledge-based automation or heuristic programming.

Автор: Zeid
Название: CAD/CAM Theory and Practice
ISBN: 0072868457 ISBN-13(EAN): 9780072868456
Издательство: McGraw-Hill
Рейтинг:
Цена: 25223.00 р.
Наличие на складе: Поставка под заказ.

Автор: Bahram Ravani
Название: CAD Based Programming for Sensory Robots
ISBN: 3642836275 ISBN-13(EAN): 9783642836275
Издательство: Springer
Рейтинг:
Цена: 14673.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: CAD based programmi ng, therefore, bri ngs together computer based model i ng and robot programmi ng and as such cuts across several discipl ines including geometric model ing, robot programming, kinematic and dynamic modeling, artificial intelligence, sensory monitoring and so-on.

Автор: P.C.C. Wang
Название: Advances in CAD/CAM
ISBN: 1461297834 ISBN-13(EAN): 9781461297833
Издательство: Springer
Рейтинг:
Цена: 26122.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Автор: Shin-ichi Minato
Название: Binary Decision Diagrams and Applications for VLSI CAD
ISBN: 0792396529 ISBN-13(EAN): 9780792396529
Издательство: Springer
Рейтинг:
Цена: 22201.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This text discusses Symbolic Boolean manipulation, which, using binary decision diagrams (BDDs), has been successfully applied to a wide variety of tasks, particularly in very large-scale integration (VLSI) computer-aided design (CAD).

Автор: Paul J.W. ten Hagen; Paul J. Veerkamp
Название: Intelligent CAD Systems III
ISBN: 3642843948 ISBN-13(EAN): 9783642843945
Издательство: Springer
Рейтинг:
Цена: 14673.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This book contains a selection of revised versions of papers presented at the Third Eurographics Workshop on Intelligent CAD Systems, which was held at Hotel Opduin on the island of Texel in The Netherlands, April 3-7, 1989.