Описание: This book provides a concise discussion of fatigue crack growth (FCG) failure and lifing analysis methods for metallic aircraft structures and components. After a reasonably concise historical review, surveys are made of (i) the importance of fatigue for aircraft structural failures and the sources of fatigue nucleation and cracking, (ii) contemporary FCG lifing methods, and (iii) the Quantitative Fractography (QF) required for determining the actual FCG behaviour. These surveys are followed by the main part of the book, which is a discussion, using case histories, of the applicabilities of Linear Elastic Fracture Mechanics (LEFM) and non-LEFM methods for analysing service fatigue failures and full- and sub-scale test results. This discussion is derived primarily from the experiences of the Defence Science and Technology Group in Melbourne, Australia, and the Netherlands Aerospace Centre, Marknesse, the Netherlands.
Автор: S?rgio M O Tavares; Paulo de Castro Название: Damage Tolerance of Metallic Aircraft Structures ISBN: 3319701894 ISBN-13(EAN): 9783319701899 Издательство: Springer Рейтинг: Цена: 7685.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
This book provides a state-of-the-art review of the fail-safe and damage tolerance approaches, allowing weight savings and increasing aircraft reliability and structural integrity.
The application of the damage tolerance approach requires extensive know-how of the fatigue and fracture properties, corrosion strength, potential failure modes and non-destructive inspection techniques, particularly minimum detectable defect and inspection intervals. In parallel, engineering practice involving damage tolerance requires numerical techniques for stress analysis of cracked structures. These evolved from basic mode I evaluations using rough finite element approaches, to current 3D modeling based on energetic approaches as the VCCT, X-FEM or meshless techniques.
This book provides a concise introduction to this subject.
Автор: Christian Augustin Название: Multifunctional Metallic Hollow Sphere Structures ISBN: 3642101526 ISBN-13(EAN): 9783642101526 Издательство: Springer Рейтинг: Цена: 19589.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Multifunctional Metallic Hollow Sphere Structures are an emerging new material category. Written by the leading experts, this reference gives a complete overview on this materials class, the fundamentals, the applications and the perspective for future use.
Автор: Grzesik Wit Название: Advanced Machining Processes of Metallic Materials ISBN: 0444637117 ISBN-13(EAN): 9780444637116 Издательство: Elsevier Science Рейтинг: Цена: 29139.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality.
In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity.
This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications.
The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology.
Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry
Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels
Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity
Автор: Bunge Название: Formability of Metallic Materials ISBN: 3540679065 ISBN-13(EAN): 9783540679066 Издательство: Springer Рейтинг: Цена: 39130.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: After a brief introduction into crystal plasti
city,the fun- damentals of crystallographic textures and plastic anisotro- py, a main topic of this book, are outlined. A large chapter is devoted to formability testing both for bulk metal and
sheet metal forming. For the first time testing methods for plastic anisotropy of round bars and tubes are included.
A profound survey is given of literature about yield criteria for
anisotropic materials up to most recent developments and the calculation of forming limits of anisotropic sheet me- tal. Other chapters are concerned with properties of workpieces after
metal forming as well as the fundamentals of the theory of plasticity and finite element simulation of metal forming processes. The book is completed by a collection of tables of
international standards for formability testing and of flow curves of metals which are most commonly used in metal forming.
It is addressed both to university and industrial
readers.
Описание: This book explores the application of external physical fields to the solidification processing of metallic alloys. Leading academics from around the world present comprehensive and critical reviews on state-of-the-art research and discuss possible future directions. Major physical fields, including electromagnetic, electric, acoustic, and thermal, are considered. In addition, the most advanced synchrotron X-ray based real-time and in-situ studies and numerical modeling methodologies are reviewed and discussed, with a special emphasis on their applications to the solidification processes. Throughout, all chapters are illustrated with both historical and very recent research cases, including typical examples of in-situ studies, modeling, and simulation. This book contains essential knowledge and information suitable for a wide audience, from undergraduate and postgraduate students to academics, practicing researchers, and engineers in materials, metallurgy, and manufacturing.
Автор: Christian Augustin Название: Multifunctional Metallic Hollow Sphere Structures ISBN: 3642004903 ISBN-13(EAN): 9783642004902 Издательство: Springer Рейтинг: Цена: 23508.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Multifunctional Metallic Hollow Sphere Structures are material category, belonging like metal foams to the class cellular metals. This title gives an overview on this materials class, the fundamentals, the applications and the perspective for future use. It provides the foundations for an understanding, their physical properties and application.
Описание: This book explores the application of external physical fields to the solidification processing of metallic alloys. Leading academics from around the world present comprehensive and critical reviews on state-of-the-art research and discuss possible future directions. Major physical fields, including electromagnetic, electric, acoustic, and thermal, are considered. In addition, the most advanced synchrotron X-ray based real-time and in-situ studies and numerical modeling methodologies are reviewed and discussed, with a special emphasis on their applications to the solidification processes. Throughout, all chapters are illustrated with both historical and very recent research cases, including typical examples of in-situ studies, modeling, and simulation. This book contains essential knowledge and information suitable for a wide audience, from undergraduate and postgraduate students to academics, practicing researchers, and engineers in materials, metallurgy, and manufacturing.
Автор: Akihiko Hirata; Kaname Matsue; Mingwei Chen Название: Structural Analysis of Metallic Glasses with Computational Homology ISBN: 4431560548 ISBN-13(EAN): 9784431560548 Издательство: Springer Рейтинг: Цена: 6986.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book introduces the application of computational homology for structural analysis of metallic glasses. The book begins with a brief basic survey of metallic glasses and computational homology, then goes on to the detailed procedures and interpretation of computational homology analysis for metallic glasses.
Автор: Joginder Singh Galsin Название: Impurity Scattering in Metallic Alloys ISBN: 1461354579 ISBN-13(EAN): 9781461354574 Издательство: Springer Рейтинг: Цена: 6986.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Because of the absence of an elementary textbook that presents a comprehensive account of different aspects of the electronic structure of metallic alloys, I have written this elementary textbook on the theory of the electronic structure of metallic alloys.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
