Описание: 1 Practical Techniques for Scaling of Optically Measured Operating Deflection Shapes.- 2 Prediction of the Coupled Impedance from Frequency Response Data.- 3 Real-Time State Detection in Highly Dynamic Systems.- 4 Stereo-DIC Measurements of Thermal Gradient Effects on the Vibratory Response of Metals.- 5 Modal Testing of a Nose Cone Using Three-Dimensional Scanning Laser Doppler Vibrometry.- 6 A Mathematical Model for Determining the Pose of a SLDV.- 7 Operational Modal Analysis with a 3D Laser Vibrometer Without External Reference.- 8 Scanning LDV Measurement Technology For Vibration Fatigue Testing.- 9 Optically Detecting Wavefronts and Wave Speeds in Water Using Refracto-Vibrometry.- 10 Stochastic Wavenumber Estimation: Damage Detection Through Simulated Guided Lamb Waves.- 11 Use Of Continuous Scanning LDV For Diagnostic.- 12 A Cost Effective DIC System for Measuring Structural Vibrations.- 13 Teaching DSP and Dynamic Measurements at the Graduate Level at Michigan Technological University.- 14 Flipping The Classroom For a Class On Experimental Vibration Analysis.- 15 Lessons Learned From Operational Modal Analysis Courses at the University of Molise.- 16 Authentic Engineering Assignments for an Undergraduate Vibration Laboratory Class.- 17 Vibration and Acoustic Analysis of Acoustic Guitar in Consideration of Transient Sound.- 18 Demarcation for the Coupling Strength in the MODENA Approach.- 19 Vibro-Acoustic Modal Model of a Traction Motor for Railway Applications.- 20 Operational Deflection Shapes of a PWM-fed Traction Motor.- 21 Acoustic Fatigue and Dynamic Behavior of Composite Panels Under Acoustic Excitation.- 22 Evaluation of Microphone Density for Finite Element Source Inversion Simulation of a Laboratory Acoustic Test.- 23 Experimental Mapping of the Acoustic Field Generated by Ultrasonic Transducers.- 24 Enhanced Spin-Down Diagnostics for Nondestructive Evaluation of High-Value Systems.- 25 Performing Direct-Field Acoustic Test Environments on a Sandia Flight System to Provide Data for Finite Element Simulation.- 26 Smooth Complex Orthogonal Decomposition Applied to Traveling Waves in Elastic Media.- 27 Subspace Algorithms in Modal Parameter Estimation for Operational Modal Analysis: Perspectives and Practices.- 28 An Application of Multivariate Empirical Mode Decomposition Towards Structural Modal Identification.- 29 Dynamic Characterization of Milling Plant Columns.- 30 Mixed Force and Displacement Control for Base-Isolation Bearings in RTHS.- 31 Leveraging Hybrid Simulation for Vibration-Based Damage Detection Studies.- 32 Real Time Hybrid Simulation with Online Model Updating on Highly Nonlinear Device.- 33 Discrete-time Compensation Technique for Real-Time Hybrid Simulation.- 34 Evaluating the Effectiveness of a Lodengraf Damping Approach for String Trimmers.- 35 Using Operating Data to Locate & Quantify Unbalance in Rotating Machinery.- 36 Gear Dynamics Characterization by Using Order-Based Modal Analysis.- 37 A Design Framework to Improve the Dynamic Characteristics of Double Planet Planetary Gearsets.- 38 Dynamics and Pareto Optimization of a Generic Synchronizer Mechanism.- 39 Modeling and Characterization of a Flexible Rotor Supported by AMB.- 40 Nonlinear Reduced Order Modeling of a Curved Axi-symmetric Perforated Plate: Comparison with Experiments.- 41 Reduced Order Models for Systems with Disparate Spatial and Temporal Scales.- 42 Using NNMs to Evaluate Reduced Order Models of Curved Beam.- 43 Simulation of Rotor Damping Assembled by Disc Shrink Fits.- 44 Developments in the Prediction of Full Field Dynamics in the Nonlinear Forced Response of Reduced Order System Models.- 45 On the Behaviour of Structures with Many Nonlinear Elements.- 46 Estimation of Instantaneous Speed for Rotating Systems: New Processing Techniques.- 47 Identification of Breathing Cracked Shaft Models from Measurements.
Описание: This monograph presents results of the analytical and numerical modeling of convective heat and mass transfer in different rotating flows caused by (i) system rotation, (ii) swirl flows due to swirl generators, and (iii) surface curvature in turns and bends.
Описание: Rotating Machinery, Hybrid Testing, Vibro-Acoustics & Laser Vibrometry, Volume 8: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics, 2017, the eighth volume of ten from the Conference brings together contributions to this important area of research and engineering.
Описание: The book discusses challenges in rotor-dynamics, rub, whirl, instability and more, and aims at those from industry or academia that are involved in transport, power, process, medical engineering, manufacturing or construction.
Описание: This book discusses condition based monitoring of rotating machines using intelligent adaptive systems. The adaptive fault diagnostics systems presented can be used in multiple time and safety critical applications in domains such as aerospace, automotive, deep earth and deep water exploration, and energy.
Описание: This monograph presents results of the analytical and numerical modeling of convective heat and mass transfer in different rotating flows caused by (i) system rotation, (ii) swirl flows due to swirl generators, and (iii) surface curvature in turns and bends.
Автор: Osami Matsushita; Masato Tanaka; Hiroshi Kanki; Ma Название: Vibrations of Rotating Machinery ISBN: 4431554556 ISBN-13(EAN): 9784431554554 Издательство: Springer Рейтинг: Цена: 22359.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Other phenomena that may be assessed in stationary and rotating reference frames include stability characteristics due to rotor internal damping and instabilities due to asymmetric shaft stiffness and thermal unbalance behavior.
Автор: Osami Matsushita; Masato Tanaka; Masao Kobayashi; Название: Vibrations of Rotating Machinery ISBN: 4431554521 ISBN-13(EAN): 9784431554523 Издательство: Springer Рейтинг: Цена: 23757.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Subsequently, vibration diagnosis techniques for traditional ball bearings and active vibration control from magnetic bearing are introduced. Torsional vibration and other coupled vibration phenomena are also included. Vibration measurement techniques and related signal processing procedures for vibration diagnosis are provided.
Автор: Chaari Fakher, Chiementin Xavier, Zimroz Radoslaw Название: Smart Monitoring of Rotating Machinery for Industry 4.0 ISBN: 3030795187 ISBN-13(EAN): 9783030795184 Издательство: Springer Рейтинг: Цена: 20962.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book offers an overview of current methods for the intelligent monitoring of rotating machines. It describes the foundations of smart monitoring, guiding readers to develop appropriate machine learning and statistical models for answering important challenges, such as the management and analysis of a large volume of data. It also discusses real-world case studies, highlighting some practical issues and proposing solutions to them. The book offers extensive information on research trends, and innovative strategies to solve emerging, practical issues. It addresses both academics and professionals dealing with condition monitoring, and mechanical and production engineering issues, in the era of industry 4.0.
Автор: Ranjan Ganguli; Vijay Panchore Название: The Rotating Beam Problem in Helicopter Dynamics ISBN: 9811355665 ISBN-13(EAN): 9789811355660 Издательство: Springer Рейтинг: Цена: 16769.00 р. Наличие на складе: Поставка под заказ.
Описание: The book addresses computational methods for solving the problem of vibration, response, loads and stability of a helicopter rotor blade modeled as a rotating beam with flap or out-of-plane bending. The focus is on explaining the implementation of the finite element method in the space and time domain for the free vibration, aeroelastic response and stability problems. The use of Floquet analysis for the aeroelastic stability analysis of rotor blades is also shown. The contents of the book will be useful to researchers in aerodynamics and applied mechanics, and will also serve well professionals working in the aerospace industry.
Описание: Rotating Machinery, Optical Methods & Scanning LDV Methods, Volume 6: Proceedings of the 39th IMAC, A Conference and Exposition on Structural Dynamics, 2021, the sixth volume of nine from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Health Monitoring, including papers on: Novel Techniques Optical Methods, Scanning LDV Methods Photogrammetry & DIC Rotating Machinery
Автор: Rivera George Название: Rotating Machinery Handbook: Volume II ISBN: 1632384043 ISBN-13(EAN): 9781632384041 Издательство: Неизвестно Цена: 24943.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
