Reinforced Concrete Design: Part II: Limit State Method, S.K. Solomon
Автор: Chiew, Sing-ping (singapore Institute Of Technology) Cai, Yan-qing (nanyang Technological University, Singapore) Название: Design examples for high strength steel reinforced concrete columns ISBN: 1138602698 ISBN-13(EAN): 9781138602694 Издательство: Taylor&Francis Рейтинг: Цена: 9492.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
This book is the companion volume to Design of High Strength Steel Reinforced Concrete Columns - A Eurocode 4 Approach.
This book provides a large number of worked examples for the design of high strength steel reinforced concrete (SRC) columns. It is based on the Eurocode 4 approach, but goes beyond this to give much needed guidance on the narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete. Special considerations are given to resistance calculations that maximize the full strength of the materials, with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. These examples build on the design principles set out in the companion volume, allowing the readers to practice and understand the EC4 methodology easily.
Structural engineers and designers who are familiar with basic EC4 design should find these design examples particularly helpful, whilst engineering undergraduate and graduate students who are studying composite steel concrete design and construction should easily gain further understanding from working through the worked examples which are set out in a step-by-step clearly fashion.
Автор: Chiew, Sing-ping (singapore Institute Of Technology) Cai, Yan-qing (nanyang Technological University, Singapore) Название: Design of high strength steel reinforced concrete columns ISBN: 0815384602 ISBN-13(EAN): 9780815384601 Издательство: Taylor&Francis Рейтинг: Цена: 9492.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
This book is the companion volume to Design Examples for High Strength Steel Reinforced Concrete Columns - A Eurocode 4 Approach.
Guidance is much needed on the design of high strength steel reinforced concrete (SRC) columns beyond the remit of Eurocode 4. Given the much narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete, there is a clear need for design beyond the guidelines. This book looks at the design of SRC columns using high strength concrete, high strength structural steel and high strength reinforcing steel materials - columns with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. The companion volumeprovides detailed worked examples on use of these high strength materials.
This book is written primarily for structural engineers and designers who are familiar with basic EC4 design, and should also be useful to civil engineering undergraduate and graduate students who are studying composite steel concrete design and construction. Equations for design resistances are presented clearly so that they can be easily programmed into design spreadsheets for ease of use.
Автор: Singh Shamsher Название: Analysis and Design of Frp Reinforced Concrete Structures ISBN: 0071847898 ISBN-13(EAN): 9780071847896 Издательство: McGraw-Hill Рейтинг: Цена: 17845.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Provides a commentary on recent financial policies covering macroeconomic perspectives, monetary-fiscal policies, external sector policies, particularly exchange rate management and gold. The collection will be of interest to the general reader with broad interest in financial policies, and also to policy-makers, opinion makers, banks and financial institutions, academics, and students of finance.
Автор: Rasheed, Hayder A. Название: Strengthening design of reinforced concrete with frp ISBN: 1482235587 ISBN-13(EAN): 9781482235586 Издательство: Taylor&Francis Рейтинг: Цена: 24499.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Strengthening Design of Reinforced Concrete with FRP establishes the art and science of strengthening design of reinforced concrete with fiber-reinforced polymer (FRP) beyond the abstract nature of the design guidelines from Canada (ISIS Canada 2001), Europe (FIB Task Group 9.3 2001), and the United States (ACI 440.2R-08). Evolved from thorough class notes used to teach a graduate course at Kansas State University, this comprehensive textbook:
Addresses material characterization, flexural strengthening of beams and slabs, shear strengthening of beams, and confinement strengthening of columns
Discusses the installation and inspection of FRP as externally bonded (EB) or near-surface-mounted (NSM) composite systems for concrete members
Contains shear design examples and design examples for each flexural failure mode independently, with comparisons to actual experimental capacity
Presents innovative design aids based on ACI 440 code provisions and hand calculations for confinement design interaction diagrams of columns
Includes extensive end-of-chapter questions, references for further study, and a solutions manual with qualifying course adoption
Delivering a detailed introduction to FRP strengthening design, Strengthening Design of Reinforced Concrete with FRP offers a depth of coverage ideal for senior-level undergraduate, master's-level, and doctoral-level graduate civil engineering courses.
Автор: Toniolo Giandomenico Название: Reinforced Concrete Design to Eurocode 2 ISBN: 3319520326 ISBN-13(EAN): 9783319520322 Издательство: Springer Рейтинг: Цена: 16769.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This textbook describes the basic mechanical features of concrete and explains the main resistant mechanisms activated in the reinforced concrete structures and foundations when subjected to centred and eccentric axial force, bending moment, shear, torsion and prestressing.
Автор: Fernando A.N. Silva; Bernardo Horowitz; Jo?o M.P.Q Название: Design of Reinforced Concrete Silo Groups ISBN: 3030136205 ISBN-13(EAN): 9783030136208 Издательство: Springer Рейтинг: Цена: 13974.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book offers a new calculation procedure of the structural behavior of grouped layout of silos, easy to use and with satisfactory responses.Groups of reinforced concrete silos are structures commonly used in the food industry, where it is usually necessary to separate the storage of different types and sources of grain. The grouped layout of silos has numerous benefits when compared with single-cell silos in which the emphasis is on creating further space for silage, normally referred to as interstice – a space formed between the edges of the group’s cells. This economic benefit, on the other hand, raises a structural problem for the designer of this type of building, which is to assess the magnitude of bending moments and hoop forces due to the structural continuity of the walls in the interstice region of the cells. Bending moments assume extreme values exactly when the interstice is loaded and the other cells in the group are empty.To develop the formulation of the proposed analysis models, a parametric study was carried out that allowed the adequate consideration of the variables involved.The idea is to help professionals, engineers, industrials and academics involved in this advanced interdisciplinary field as a comprehensive guide for courses offered at different levels of learning (undergraduate and postgraduate).
Автор: Kar Chun Tan Название: Eurocode 2 Design Data for Reinforced Concrete Columns ISBN: 9811368406 ISBN-13(EAN): 9789811368400 Издательство: Springer Рейтинг: Цена: 23757.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book was written to facilitate column sizing and reinforcement design for structural engineers. These outputs can also benefit quantity surveyors, especially for costing purposes, and help avoid careless design errors. The book is chiefly intended for structural engineers who implement Eurocode 2 for reinforced concrete design.
Описание: Focuses on several metaheuristic algorithms and the design of several types of structural members. Additionally, retrofit applications and seismic design issues are considered for readers in earthquake zones. The book features a wide range of topics, including algorithms, design variables, and retrofit design.
Описание: Reinforced concrete structures are one of the major structural types and must adhere to design regulation codes. It is ideal to find the best design (section dimension, material type, and amount of reinforcement) with the minimum cost providing the design constraints (design formulation considering loading of structure). Metaheuristic methods inspired by natural phenomena can consider design constraints by combining the analyses of formulation of reinforced concrete structures with an iterative numerical algorithm using several convergence options of random generation of candidate design solutions.
Metaheuristic Approaches for Optimum Design of Reinforced Concrete Structures: Emerging Research and Opportunities is a pivotal reference source that focuses on several metaheuristic algorithms and the design of several types of structural members. Additionally, retrofit applications and seismic design issues are considered for readers in earthquake zones. Highlighting a wide range of topics including algorithms, design variables, and retrofit design, this book is ideally designed for architects, engineers, urban designers, government officials, policymakers, researchers, academicians, and students.
Автор: GangaRao, Hota V.S. , Taly, Narendra , Vijay, P. Название: Reinforced Concrete Design with FRP Composites ISBN: 0367389843 ISBN-13(EAN): 9780367389840 Издательство: Taylor&Francis Рейтинг: Цена: 10104.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Although the use of composites has increased in many industrial, commercial, medical, and defense applications, there is a lack of technical literature that examines composites in conjunction with concrete construction. Fulfilling the need for a comprehensive, explicit guide, Reinforced Concrete Design with FRP Composites presents specific information necessary for designing concrete structures with fiber reinforced polymer (FRP) composites as a substitute for steel reinforcement and for using FRP fabrics to strengthen concrete members.
In a reader-friendly, design-oriented manner, this book discusses the analysis, design, durability, and serviceability of concrete members reinforced with FRP. The authors first introduce the elements that constitute composites-the structural constituent and matrix-and discuss how composites are manufactured. Following an examination of the durability of FRP composites that contain fibers, such as glass, carbon, or aramid, the book illustrates how FRP external reinforcement systems (FRP-ER) can be used for enhancing the strength and stiffness of concrete structures using theory and design principles. The concluding chapter concentrates on serviceability aspects of concrete members internally reinforced with FRP. An excellent resource of design and construction practices, Reinforced Concrete Design with FRP Composites is a state-of-the-art reference on concrete members reinforced with FRP.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
