1D and Multi-D Modeling Techniques for IC Engine Simulation, Angelo Onorati, Gianluca Montenegro
Автор: Rolf Isermann Название: Engine Modeling and Control ISBN: 3662506297 ISBN-13(EAN): 9783662506295 Издательство: Springer Рейтинг: Цена: 19589.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Increasing performance demands on combustion engines for reduced fuel consumption and emissions, as well maintenance of satisfactory driveability, require improved processes for control of combustion and exhaust. In addition to structural changes, research suggests these goals can be achieved by higher variability supported by better actuators and sensors. So modern engines incorporate more manipulation variables and sensors and a complex electronic controls. The design of the many control and also diagnostic functions requires model-based methods taking into account mechatronic engineering principles.
This book treats physically-based as well as experimentally-refined engine models for gasoline and diesel engines and uses them to exemplify the design of various advanced control systems. The procedures, from measurements through simulation to calibration on test benches, are systematically described and demonstrated. The treatment spans not only the stationary but also the dynamic behavior of engines. Several new control regimens are detailed, such as multivariable feedforward and feedback control based on nonlinear net models, combustion pressure and HCCI control. Many new results with signal and process model-based fault diagnosis are used to show how on-board fault diagnosis can be considerably improved.
The book is directed at advanced students working in control, electrical, mechanical and mechatronic engineering and will also be useful for practicing engineers in the field of engine and automotive engineering.
Описание: The 3D-CFD Tool QuickSim.- Numerical Boundary Conditions.- Liquid Fuel Modeling.- Parametrization of Injector Properties.
Автор: Genta Giancarlo Et Al Название: Road Vehicle Dynamics: Fundamentals Of Modeling And Simulation ISBN: 9814713430 ISBN-13(EAN): 9789814713436 Издательство: World Scientific Publishing Рейтинг: Цена: 49896.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The Present Text, An Expanded Edition Of The Successful Motor Vehicle Dynamics: Modeling And Simulation (By Giancarlo Genta), Started As A Revised And Expanded Version Of A Collections Of Notes Of The Lectures Of Motor Vehicle Mechanics To The Students Of Mechanical And Automotive Engineering At The Politecnico (Technical University) Of Torino, Italy. The Resulting Textbook Originated From The Aim To Collect The Foundations Of The Discipline And The More Recent Developments In A Single Text; Which, Being Published Mainly In Journals And Proceedings, Are Not Readily Available To Students And Technicians Working In Industry.Road Vehicle Dynamics Supplies The Reader With Both The Theoretical Background Of The Subject And The Know-How Needed To Perform Numerical Simulations. It Is Structured In Three Parts: It Begins With A Historical Overview Of Road Vehicles; Then Deals With The Forces Exchanged Between The Vehicle And The Road, And The Vehicle And The Air; And Finally, Deals With The Dynamic Behavior Of The Vehicle In Normal Driving Conditions With Some Extensions Towards Conditions Encountered In High-Speed Racing. Coverage Of Contemporary Automatic Controls Is Included In This Edition.
Автор: Tai-hoon Kim; Carlos Ramos; Jemal Abawajy; Byeong- Название: Computer Applications for Modeling, Simulation, and Automobile ISBN: 3642352472 ISBN-13(EAN): 9783642352478 Издательство: Springer Рейтинг: Цена: 6986.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Modeling and simulation.- Automotive science and technology.
Автор: Rolf Isermann Название: Engine Modeling and Control ISBN: 3642399339 ISBN-13(EAN): 9783642399336 Издательство: Springer Рейтинг: Цена: 23508.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Increasing performance demands on combustion engines for reduced fuel consumption and emissions, as well maintenance of satisfactory driveability, require improved processes for control of combustion and exhaust. In addition to structural changes, research suggests these goals can be achieved by higher variability supported by better actuators and sensors. So modern engines incorporate more manipulation variables and sensors and a complex electronic controls. The design of the many control and also diagnostic functions requires model-based methods taking into account mechatronic engineering principles.
This book treats physically-based as well as experimentally-refined engine models for gasoline and diesel engines and uses them to exemplify the design of various advanced control systems. The procedures, from measurements through simulation to calibration on test benches, are systematically described and demonstrated. The treatment spans not only the stationary but also the dynamic behavior of engines. Several new control regimens are detailed, such as multivariable feedforward and feedback control based on nonlinear net models, combustion pressure and HCCI control. Many new results with signal and process model-based fault diagnosis are used to show how on-board fault diagnosis can be considerably improved.
The book is directed at advanced students working in control, electrical, mechanical and mechatronic engineering and will also be useful for practicing engineers in the field of engine and automotive engineering.
Автор: Gunnar Stiesch Название: Modeling Engine Spray and Combustion Processes ISBN: 3642056296 ISBN-13(EAN): 9783642056291 Издательство: Springer Рейтинг: Цена: 22359.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The utilization of mathematical models to numerically describe the performance of internal combustion engines is of great significance in the development of new and improved engines.
Описание: This book presents a comprehensive computational mechanics and materials science–based framework for multi-scale analysis of multi-phase, heterogeneous materials. It focuses on micromechanical analysis of deformation and failure using the Voronoi cell finite element method (VCFEM) developed by the author and his research group for the efficient and accurate modeling of materials with non-uniform heterogeneous microstructures. While the topics covered in the book encompass the macroscopic scale of structural components and the microscopic scale of constituent heterogeneities like inclusions or voids, the general framework may be extended to other scales as well. The book includes numerical examples and a CD-ROM with VCFEM source codes.
Автор: Johannes Liebl; Christian Beidl Название: VPC – Simulation und Test 2015 ISBN: 3658207353 ISBN-13(EAN): 9783658207359 Издательство: Springer Рейтинг: Цена: 15672.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Автор: Liebl Название: Simulation und Test 2017 ISBN: 3658208279 ISBN-13(EAN): 9783658208271 Издательство: Springer Рейтинг: Цена: 14365.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Internal Combustion Engines (ICE) still have potential for substantial improvements. This book offers an introduction to cost-effective model-based control-system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices.
Описание: This book provides a detailed description of fault tolerant design techniques for smart power drivers and their application in the design of automotive airbag ICs to ensure correct deployment. The book begins with an introduction to the nature of electrical loads in the car, then moves on to describe various current sensing circuits, featuring thermal simulations. It shows how simple design techniques can be applied to ensure appropriate functionality of the IC under any power up condition. It concludes by introducing diagnostic circuits and measurement results. This book is a useful reference for automotive IC designers and provides specifications and design guidelines not found in the current literature.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
