Waterflooding: Injection Regime and Injection Wells, Chappell Dave

Автор: de Dios J. Carlos, Mishra Srikanta, Poletto Flavio
Название: Co2 Injection in the Network of Carbonate Fractures
ISBN: 3030629856 ISBN-13(EAN): 9783030629854
Издательство: Springer
Рейтинг:
Цена: 13974.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This book presents guidelines for the design, operation and monitoring of CO2 injection in fractured carbonates, with low permeability in the rock matrix, for geological storage in permanent trapping.

Автор: Vannessa Goodship
Название: Injection Moulding: A Practical Guide
ISBN: 3110653028 ISBN-13(EAN): 9783110653021
Издательство: Walter de Gruyter
Цена: 30673.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This revised 3rd edition details the factors involved in the injection moulding process, from material properties and selection to troubleshooting faults, and includes the equipment types currently in use and machine settings for different types of plastics. Since material flow is critical in moulding, the book covers rheology and viscosity. High temperature is also discussed as it can lead to poor quality mouldings due to material degradation.

Название: Understanding Injection Molds 2e
ISBN: 1569908435 ISBN-13(EAN): 9781569908433
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 12539.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: Understanding Injection Molds opens up the entire subject of injection mold technology, including numerous special procedures, in a well-grounded and practical way. It is specifically intended for beginners, young professionals, business owners, and engineering students. The chapters are clearly structured and easy to understand. The book is designed so that it provides a complete basic knowledge of injection molds in chronological order as well as day-to-day guidance and advice.The numerous colour figures facilitate a rapid understanding of the content, which is especially helpful to the beginner who wants to learn about injection molds quickly. In the forefront of the description are thermoplastic molds. Divergent processes for thermoset or elastomer molds are explained at the end of each chapter. This book captures the current state of the art, and is written by authors who are specialists in the field. The second edition has been updated and improved throughout.

Автор: Rong Zheng; Roger I. Tanner; Xi-Jun Fan
Название: Injection Molding
ISBN: 3642445160 ISBN-13(EAN): 9783642445163
Издательство: Springer
Рейтинг:
Цена: 15672.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This practical volume covers the fundamental principles and numerical methods related to modeling the injection molding process. It addresses the cutting edge of our understanding of simulation technologies, without losing sight of useful classical approaches.

Автор: Trombley Gina
Название: Injection Molding: Critical Hurdles
ISBN: 1632382954 ISBN-13(EAN): 9781632382955
Издательство: Неизвестно
Цена: 20116.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Автор: Hans-Peter Heim
Название: Specialized Injection Molding Techniques
ISBN: 0323341004 ISBN-13(EAN): 9780323341004
Издательство: Elsevier Science
Рейтинг:
Цена: 29139.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: . Special Injection Molding Techniques covers several techniques used to create multicomponent products, hollow areas, and hard-soft combinations that cannot be produced with standard injection molding processes. It also includes information on the processing techniques of special materials, including foaming agents, bio-based materials, and thermosets. . The book describes the most industrially relevant special injection molding techniques, with a detailed focus on understanding the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior, also providing an explanation of process routes and their variants, and discussions of the most influencing process parameters. As special molding technologies have the potential to transform plastics processing to a highly-efficient, integrated type of manufacturing, this book provides a timely survey of these technologies, putting them into context, accentuating new opportunities, and giving relevant information on processing.

Автор: Loret
Название: Fluid Injection in Deformable Geological Formations
ISBN: 3319942166 ISBN-13(EAN): 9783319942162
Издательство: Springer
Рейтинг:
Цена: 16070.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This book offers an introduction to the geomechanical issues raised by both the extraction of actual and potential energy resources, and by the treatment of the ensuing environmental concerns. Discussions of the operations of injection of fluids into, and withdrawal from, geological formations link the chapters, each devoted to a particular technical aspect or scientific issue, or to a particular energy resource.Subjects are ordered according to their industrial applications, including enhanced oil and gas recovery, gas hydrates, enhanced geothermal systems, hydraulic fracturing, and carbon dioxide sequestration. An overview of the industrial, research and simulation aspects for each subject is provided.

Fluid Injection in Deformable Geological Formations will be of interest to academic and industrial researchers in a wide variety of fields, including computational mechanics, civil engineering, geotechnical engineering and geomechanics, engineering seismology, petroleum engineering, reservoir engineering, and engineering geology.

Автор: Cao, Peng
Название: Feedstock Tech For Reactive Metal Injection Molding
ISBN: 012817501X ISBN-13(EAN): 9780128175019
Издательство: Elsevier Science
Рейтинг:
Цена: 19875.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание:

Feedstock Tech for Reactive Metal Injection Molding: Process, Design, and Application provides an authoritative guide on the basics of feedstock technology and the latest developments in binders for titanium metal injection moulding and their potential implications. In addition, the book presents challenges that MIM technology of reactive metals is currently facing and potential solutions for commercial success. As both commercial growth and research development are fundamentally driven by the economics of manufacture, this book presents the problems and potential solutions regarding reactive metals, making it a valuable resource for engineers intending to utilize MIM in commercial product design.

Автор: John Shrimpton
Название: Charge Injection Systems
ISBN: 3642101364 ISBN-13(EAN): 9783642101366
Издательство: Springer
Рейтинг:
Цена: 16977.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This reference covers the physical principles and experimental and theoretical work of Charge Injection Systems plus technology development past and present. It`s a broad overview that draws from electrostatistics, fluid mechanics and engineering technology.

Автор: Chen Shia-Chung, Turng Lih-Sheng
Название: Advanced Injection Molding Technologies
ISBN: 1569906033 ISBN-13(EAN): 9781569906033
Издательство: Mare Nostrum (Eurospan)
Рейтинг:
Цена: 27720.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: Leading international experts cover the most recent and significant developments in advanced injection molding technologies, such as intelligent process control, emerging special injection molding processes, process visualization, variable mold temperature technologies, and computer-aided engineering (CAE).