Описание: 1 Fatigue Behaviour of Stainless Steels A Multi Parametric Approach.- 2 Measurement of Mechanical Dissipation in SMAs by Infrared Thermography.- 3 The Effect of Microstructure on Energy Dissipation in 316L Stainless Steel.- 4 Large Area Nondestructive Evaluation of a Fatigue Loaded Composite Structure.- 5 Sensitivity Analysis of Hybrid Thermoelastic Techniques.- 6 Determining Stress Intensity Factors Using Hybrid Thermoelastic Analysis.- 7 Stress Analysis of a Finite Orthotropic Plate Containing an Elliptical Hole from Recorded Temperature Data.- 8 Using TSA to Identify Regions Having Developed Plastic Strain During Welding.- 9 Finite Element Modelling of a Series of Austenitic Steel 316L Weldments to Inform Thermoelastic Stress Analysis Residual Stress Assessment.- 10 Residual Stress Measurement of Full Scale Jet Engine Bearing Elements Using the Contour Method.- 11 ESPI Hole Drilling of Rings and Holes Using Cylindrical Hole Analysis.- 12 Preliminary Study on Residual Stress in FDM Parts.- 13 Predicting Residual Stress on X ray Tomographed Complex Bi Layer Geometries Using 3D Finite Element Analysis.- 14 Combining Hole Drilling and Ring Core Techniques.- 15 A Low Cost Residual Stress Measuring Instrument.- 16 Non destructive Internal Strain Measurement Using High Energy Synchrotron Radiation.- 17 Discussion on X Ray and HDM Residual Stress Measurements.- 18 Reducing Full Field Identification Cost by Using Quasi Newton Methods.- 19 Parameter Identification of Nonlinear Viscoelastic Material Model using Finite Element based Inverse Analysis.- 20 Stiffness Heterogeneity of Multiply Paperboard Examined with VFM.- 21 Rigid Body Motion Tolerance for Industrial Helical CT Measurements of Logs.- 22 Development and Experimental Validation of Thermally Stable Unimorph SMP Actuators Incorporating Transverse Curvature.- 23 Identification of constitutive model parameters in Hopkinson Bar tests.
Описание: Mechanics of Biological Systems and Materials, Volume 6 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of ten from the Conference, brings together contributions to this important area of research and engineering.
Описание: Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas: New Developments in Optical Methods & Fringe Pattern Analysis;DIC Applications for Challenging Environments;Optical Methods in SEM: History & Perspective;Mechanical Characterization of Materials & Structures with Optical Methods;Bioengineering.
Описание: Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas: New Developments in Optical Methods & Fringe Pattern Analysis;DIC Applications for Challenging Environments;Optical Methods in SEM: History & Perspective;Mechanical Characterization of Materials & Structures with Optical Methods;Bioengineering.
Описание: Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3 of the Proceedings of the 2019 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the third volume of six from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of optical methods ranging from traditional photoelasticity and interferometry to more recent DIC and DVC techniques, and includes papers in the following general technical research areas:
DIC Methods & Its Applications
Photoelsticity and Interferometry Applications
Micro-Optics and Microscopic Systems
Multiscale and New Developments in Optical Methods
Описание: 1 Atomistic Simulation of a Two-Dimensional Polymer Tougher Than Graphene.- 2 Transverse Compression Response of Ultra-high Molecular Weight Polyethylene Single Fibers.- 3 Morphology and Mechanics of the Young Minipig Cranium.- 4 Dynamic Characterization of Nitronic 30, 40 and 50 Series Stainless Steels by Numerical Analysis.- 5 Mechanical Response of T800/F3900 Composite at Various Strain Rates.- 6 Full-Field Temperature and Strain Measurement in Dynamic Tension Tests on SS 304.- 7 Dynamic Fracture Response of a Synthetic Cortical Bone Simulant.- 8 Fracture Response of Cross-Linked Epoxy Resins at High Loading Rate as a Function of Glass Transition Temperature.- 9 Measurement of Dynamic Response Parameters of an Underdamped System.- 10 Dynamic Penetration and Bifurcation of a Crack at an Interface in a Transparent Bi-Layer: Effect of Impact Velocity.- 11 Influence of Loading Rate Effects Fracture Strength of Individual Sand Particles.- 11 Arrested Compression Tests on two Types of Sand.- 12 Composite Plate Response to Shock Wave Loading.- 13 Initial Experimental Validation of an Eulerian Method for Modeling Composites.- 14 Characterization of High Strain Rate Dependency of 3D CFRP materials.- 15 High-strain Rate Compressive Behavior of a Clay under Uniaxial Strain State.- 16 Mesoscopic Modelling of High Performance Fiber Reinforced Concrete under Dynamic Loading.- 17 Comparison of Failure Mechanisms due to Shock Propagation in Forged, Layered, and Additive Manufactured Titanium Alloy.- 18 Instrumented Penetration of Metal Alloys during High-Velocity Impacts.- 19 Confined Underwater Implosions using 3D Digital Image Correlation.- 20 Response of Composite Cylinders Subjected to Near Field Underwater Explosions._ 21 Microstructural Effects on the Spall Properties of Al 5083: Equal-Channel Angular Extrusion (ECAE) plus Cold Rolling.- 23 Experimental Study of the Dynamic Fragmentation in Transparent Ceramic Subjected to Projectile Impact.- 24 Instrumented Projector for Dynamic Testing.- 25 NIST Mini-Kolsky Bar: Historical Review.- 26 A General Approach to Evaluate the Dynamic Fracture Toughness of Materials.- 27 Which one has More Influence on Fracture Strength of Ceramics: Pressure or Strain Rate?.- 28 Dynamic Strength and Fragmentation Experiments on Brittle Materials Using Theta-specimens.- 29 DTEM in situ Mechanical Testing: Defects Motion at High Strain Rates.- 30 High-Strain-Rate Deformation of Ti-6Al-4V through Compression Kolsky Bar at High Temperatures.- 31 Parametric Study of the Formation of Cone Cracks in Brittle Materials.- 32 Shockless Characterization of Ceramics.- 33 Dynamic Hyper Elastic Behavior of Compression Shock Loaded Vibration Dampers.- 34 Specimen Size Effect on Stress-Strain Response of Foams Under Direct-Impact.- 35 Texture Evolution of Fine-grained Mg Alloy at Dynamic Strain Rates.- Failure Processes Governing High Rate Impact Resistance of Epoxy Resins Filled with Core Shell Rubber Nanoparticles.- 37 Ballistic Response of Polydicyclopentadiene vs. Epoxy Resins and Effects of Crosslinking.
Описание: Experimental and Applied Mechanics, Volume 4 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of ten from the Conference, brings together contributions to important areas of research and engineering.
Описание: 1 Fatigue Damage Precursor Identification Using Nondestructive Evaluation Coupled with Electron Microscopy.- 2 Experimental Fracture Analysis of Tropical Species Using the Grid Method.- 3 Investigating the Effective Fracture Toughness of Heterogeneous Materials.- 4 Improved Hybrid Specimen for Vibration Bending Fatigue.- 5 Experimental Study of Residual Plastic Strain and Damages Development in Carbon Fiber Composite.- 6 Experimental Investigation of Strength of Curved Beam by Thin Ply Non Crimp Fabric Laminates.- 7 Role of Laminate Thickness on Sequential Dynamic Delamination of Curved [90/0] CFRP Composite Laminates.- 8 Application of eMMC Model to Fracture of Metal Sheets.- 9 Hydrolytic Degradation and its Effect on Mechanical Properties of HFPE II 52 Polyimide Preliminary Results.- 10 Mixed Mode and Mode II Fatigue Crack Growth in Woven Composites.- 11 Characterization of Fatigue Induced Damage Evolution in CFRPs Using DIC.- 12 Damage Characterization for Electronic Components Under Impact Loading.- 13 Dynamic Mode II Delamination in Through Thickness Reinforced Composites.- 14 Measurement of Bond Line Fracture Toughness in Adhesively Bonded Composite Structures by Nanoindentation.- 15 Experimental and Numerical Investigation of Novel Crack Stopper Concepts for Lightweight Foam Cored Sandwich Structures.- 16 Probabilistic Improvement of Crack Propagation Monitoring by Using Acoustic Emission.- 17 Failure Detection of Temporary Structures with Digital Image Correlation for Construction Safety Applications.- 18 Using Digital Image Correlation to Detect Cracking in Opalinus Shale.- 19 Early Detection Of Damage Mechanisms In Composites During Fatigue Tests.- 20 Implementing Noise Multi Frequency Stimulus and Realtime Analysis with Nonlinear Model Tracking.
Описание: Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 7 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of ten from the Conference, brings together contributions to this important area of research and engineering.
Описание: Micro-and Nanomechanics, Volume 5 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fifth volume of ten from the Conference, brings together contributions to this important area of research and engineering.
Описание: 1 Cracking and Durability of Composites in a Marine Environment.- 2 Analyses of Nanoscale to Microscale Strength and Crack-tip Stresses Using Nanomechanical Raman Spectroscopy in In 617.- 3 High Creep Resistance of Titanium Aluminides Sintered by SPS.- 4 An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers.- 5 Keynote Life Prediction of CFRP Laminates based on Accelerated Testing Methodology.- 6 Rate Dependent Interfacial Properties Using the JKR Experimental Technique.- 7 Bio-based Composites as Thermorheologically Complex Materials.- 8 Viscoelastic Properties of Longitudinal Waves in a Hollow Cylinder.- 9 Evaluation of Viscoelastic Characteristics Under High Strain Rate by Impact Test.- 10 Phase Changes in Embedded HMX in Response to Periodic Mechanical Excitation.- 11 Effect of Crystal Density on Dynamic Deformation Behavior of PBX.- 12 Strain Rate Dependent Failure of Interfaces Examined via Nanoimpact Experiments.- 13 A Theory of Coupled Anisothermal Chemomechanical Degradation for Finitely-deforming Composite Materials with Eshelbian Interactive Forces.- 14 Effect Of Temperature And Moisture on the Mechanical Properties of Fiber Reinforced Nylon 6 Composites.- 15 Using Hydrostatic Pressure to Maximize Frequency Dependent Damping Properties of Thermoplastic Polyurethane.- 16 Impact Of Hydro-Mechanical Loadings On Rupture Process In Wood Material.- 17 2D Transient Viscoplastic Model for Dislocation Generation of SiC by PVT Method.- 18 Temperature-Dependent Small Strain Plasticity Behavior of 304L Stainless Steel.- 19 Time and Temperature Creep Behaviour Measurement of Al and Al-Mg Alloy Thin Films Using Pressure Bulge Tests.- 20 Multifunctional Wings with Flexible Batteries and Solar Cells for Robotic Birds.- 21 Rate-Dependent Constitutive Model Development of PC/ABS Material.- 22 Comprehensive Viscoelastic Properties Characterization of EMC Using FBG Sensor.- 23 Back Stress in Modeling the Response of PEEK and PC.- 24 Dynamic Testing and Constitutive Modelling of NBR Rubbers.- 25 A New Temperature-dependent Storage Modulus Model of Epoxy Resin.- 26 Identification of Plastic Behaviour of Sheet Metals in High Strain Rate Tests.- 27 Characterization of Fiber Composites at Lower Strain Rates.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
