Описание: This book assembles, identifies and highlights the most recent developments in Rehabilitation and retrofitting of historical and heritage structures.
Автор: Kar Chun Tan Название: Eurocode 2 Design Data for Reinforced Concrete Columns ISBN: 9811368406 ISBN-13(EAN): 9789811368400 Издательство: Springer Рейтинг: Цена: 23757.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book was written to facilitate column sizing and reinforcement design for structural engineers. These outputs can also benefit quantity surveyors, especially for costing purposes, and help avoid careless design errors. The book is chiefly intended for structural engineers who implement Eurocode 2 for reinforced concrete design.
Автор: Chiew, Sing-ping (singapore Institute Of Technology) Cai, Yan-qing (nanyang Technological University, Singapore) Название: Design examples for high strength steel reinforced concrete columns ISBN: 1138602698 ISBN-13(EAN): 9781138602694 Издательство: Taylor&Francis Рейтинг: Цена: 9492.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
This book is the companion volume to Design of High Strength Steel Reinforced Concrete Columns - A Eurocode 4 Approach.
This book provides a large number of worked examples for the design of high strength steel reinforced concrete (SRC) columns. It is based on the Eurocode 4 approach, but goes beyond this to give much needed guidance on the narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete. Special considerations are given to resistance calculations that maximize the full strength of the materials, with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. These examples build on the design principles set out in the companion volume, allowing the readers to practice and understand the EC4 methodology easily.
Structural engineers and designers who are familiar with basic EC4 design should find these design examples particularly helpful, whilst engineering undergraduate and graduate students who are studying composite steel concrete design and construction should easily gain further understanding from working through the worked examples which are set out in a step-by-step clearly fashion.
Автор: Chiew, Sing-ping (singapore Institute Of Technology) Cai, Yan-qing (nanyang Technological University, Singapore) Название: Design of high strength steel reinforced concrete columns ISBN: 0815384602 ISBN-13(EAN): 9780815384601 Издательство: Taylor&Francis Рейтинг: Цена: 9492.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
This book is the companion volume to Design Examples for High Strength Steel Reinforced Concrete Columns - A Eurocode 4 Approach.
Guidance is much needed on the design of high strength steel reinforced concrete (SRC) columns beyond the remit of Eurocode 4. Given the much narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete, there is a clear need for design beyond the guidelines. This book looks at the design of SRC columns using high strength concrete, high strength structural steel and high strength reinforcing steel materials - columns with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. The companion volumeprovides detailed worked examples on use of these high strength materials.
This book is written primarily for structural engineers and designers who are familiar with basic EC4 design, and should also be useful to civil engineering undergraduate and graduate students who are studying composite steel concrete design and construction. Equations for design resistances are presented clearly so that they can be easily programmed into design spreadsheets for ease of use.
Автор: Yekrangnia, Mohammad Название: Advanced Design Examples of Seismic Retrofit of Structures ISBN: 0081025343 ISBN-13(EAN): 9780081025345 Издательство: Elsevier Science Рейтинг: Цена: 19370.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Advanced Design Examples of Seismic Retrofit of Structures provides insights on the problems associated with the seismic retrofitting of existing structures. The authors present various international case studies of seismic retrofitting projects and the different possible strategies on how to handle complex problems encountered. Users will find tactics on a variety of problems that are commonly faced, including problems faced by engineers and authorities who have little or no experience in the practice of seismic retrofitting.
Provides several examples of retrofitting projects that cover different structural systems, from non-engineered houses, to frame buildings
Presents various retrofitting methods through examples
Provides detailed, step-by-step design procedures for each example
Includes real retrofit projects with photos of the details of various retrofitting techniques
Contains several modeling details and hints making use of various software in this area
This book provides detailed information on how to set up Deep Energy Retrofits (DERs) in public buildings, and shares in-depth insights into the current status of the major technologies, strategies and best practice examples of how to cost-effectively combine them. Case studies from the U.S.A. and Europe show that that Deep Energy Retrofit can be achieved with a limited core technologies bundle readily available on the market. Characteristics of some of these core technology measures depend on the technologies available on an individual nation's market, on the minimum requirements of national standards, and on economics (as determined by a life cycle cost analysis). Also, requirements to building envelope-related technologies (e.g., insulation levels, windows, vapor and water barriers, and requirements for building airtightness) depend on specific climate conditions. This Guide provides best practice examples of how to apply these technologies in different construction situations. High levels of energy use reduction using core technology bundles along with improvements in indoor climate and thermal comfort can be only achieved when a Deep Energy Retrofit adopts a quality assurance process. In addition to design, construction, commissioning, and post-occupancy phases of the quality assurance process, the Guide emphasizes the importance of clearly and concisely formulating and documenting the Owner's goals, expectations, and requirements for the renovated building during development of the statement of work. Another important component of the quality assurance process is a procurement phase, during which bidders' qualifications, their understanding of the scope of work and its requirements, and their previous experience are analyzed.
The building sector holds the potential for tremendous improvements in terms of energy efficiency and reducing carbon emissions, and energy retrofits to the existing building stock represent a significant opportunity in the transition to a low-carbon future. Moreover, investing in highly efficient building materials and systems can replace long-term energy imports, contribute to cost cutting, and create a wealth of new jobs. Yet, while the technologies needed in order to improve energy efficiency are readily available, significant progress has not yet been made, and "best practices" for implementing building technologies and renewable energy sources are still relegated to small "niche" applications. Offering essential information on Deep Energy Retrofits, the book offers a valuable asset for architects, public authorities, project developers, and engineers alike.
Автор: R?diger Lohse; Alexander Zhivov Название: Deep Energy Retrofit Guide for Public Buildings ISBN: 3030149218 ISBN-13(EAN): 9783030149215 Издательство: Springer Рейтинг: Цена: 6986.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book provides detailed information on how to set up Deep Energy Retrofits (DERs) in public buildings, and shares in-depth insights into the current status of the major technologies, strategies and practical best practice examples of how to cost-effectively combine them. Case studies from Europe are analyzed with respect to energy use before and after renovation, reasons for undertaking the renovation, co-benefits achieved, resulting cost-effectiveness, and the business models employed.The building sector holds the potential for tremendous improvements in terms of energy efficiency and reducing carbon emissions, and energy retrofits to the existing building stock represent a significant opportunity in the transition to a low-carbon future. Moreover, investing in highly efficient building materials and systems can replace long-term energy imports, contribute to cost cutting, and create a wealth of new jobs. Yet, while the technologies needed in order to improve energy efficiency are readily available, significant progress has not yet been made, and “best practices” for implementing building technologies and renewable energy sources are still relegated to small “niche” applications.Offering essential information on Deep Energy Retrofits, the book offers a valuable asset for architects, public authorities, project developers, and engineers alike.
Описание: This thesis studied the effect of aging of intumescent coatings (ICs) on the reliability of protected steel columns in fire condition and developed a probabilistic approach to assess the service life of ICs applied on steel columns.
Описание: This thesis studied the effect of aging of intumescent coatings (ICs) on the reliability of protected steel columns in fire condition and developed a probabilistic approach to assess the service life of ICs applied on steel columns.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
