Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, Volume 7: Proceedings o, Kramer Sharlotte L. B., Tighe Rachel
Описание: Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 8 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the eighth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Residual Stress Measurements Stress Analysis from Thermal Measurements Damage & Defect Analysis Using Infrared Techniques Inverse Methods in Plasticity Inverse Problem Methodologies in Experimental Mechanics
Автор: Pelleg, Joshua Название: Additive And Traditionally Manufactured Components ISBN: 0128219181 ISBN-13(EAN): 9780128219188 Издательство: Elsevier Science Рейтинг: Цена: 33013.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties looks at the mechanical properties of materials produced by additive manufacturing (AM) and compares them with conventional methods. Since the production of objects by AM techniques can used in a broad array of materials, the alloys presented are the ones most commonly produced by AM - Al alloys, Ti alloys and steel. The book explores the six main types of techniques: Fused Deposition Method (FDM), Powder Bed Fusion (PBF), Inkjet Printing, Stereolithography (SLA), Direct Energy Deposition (DED) and Laminated Object Manufacturing (LOM), and follows with the techniques being utilized for fabrication.
Testing of AM fabricated specimens, including tension, compression and hardness is included, along with a comparison of those results to specimens obtained by conventional fabrication methods. Topics covered include static deformation, time dependent deformation (creep), cyclic deformation (fatigue) and fracture in specimens. The book concludes with a review of the mechanical properties of nanoscale specimens obtained by AM.
Автор: Sharlotte Kramer; Jennifer L. Jordan; Helena Jin; Название: Mechanics of Additive and Advanced Manufacturing, Volume 8 ISBN: 3030069729 ISBN-13(EAN): 9783030069728 Издательство: Springer Рейтинг: Цена: 27950.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Mechanics of Additive and Advanced Manufacturing, Volume 8 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the eighth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies, including:Fatigue & Fracture in AM MaterialsAdditively Manufactured Metals & StructuresAM Process CharacterizationProcessing & Mechanical Behavior of AM MaterialsDynamic Response of AM MaterialsAdditively Manufactured Polymers & Composites
Описание: 1 Fatigue Behaviour of Stainless Steels A Multi Parametric Approach.- 2 Measurement of Mechanical Dissipation in SMAs by Infrared Thermography.- 3 The Effect of Microstructure on Energy Dissipation in 316L Stainless Steel.- 4 Large Area Nondestructive Evaluation of a Fatigue Loaded Composite Structure.- 5 Sensitivity Analysis of Hybrid Thermoelastic Techniques.- 6 Determining Stress Intensity Factors Using Hybrid Thermoelastic Analysis.- 7 Stress Analysis of a Finite Orthotropic Plate Containing an Elliptical Hole from Recorded Temperature Data.- 8 Using TSA to Identify Regions Having Developed Plastic Strain During Welding.- 9 Finite Element Modelling of a Series of Austenitic Steel 316L Weldments to Inform Thermoelastic Stress Analysis Residual Stress Assessment.- 10 Residual Stress Measurement of Full Scale Jet Engine Bearing Elements Using the Contour Method.- 11 ESPI Hole Drilling of Rings and Holes Using Cylindrical Hole Analysis.- 12 Preliminary Study on Residual Stress in FDM Parts.- 13 Predicting Residual Stress on X ray Tomographed Complex Bi Layer Geometries Using 3D Finite Element Analysis.- 14 Combining Hole Drilling and Ring Core Techniques.- 15 A Low Cost Residual Stress Measuring Instrument.- 16 Non destructive Internal Strain Measurement Using High Energy Synchrotron Radiation.- 17 Discussion on X Ray and HDM Residual Stress Measurements.- 18 Reducing Full Field Identification Cost by Using Quasi Newton Methods.- 19 Parameter Identification of Nonlinear Viscoelastic Material Model using Finite Element based Inverse Analysis.- 20 Stiffness Heterogeneity of Multiply Paperboard Examined with VFM.- 21 Rigid Body Motion Tolerance for Industrial Helical CT Measurements of Logs.- 22 Development and Experimental Validation of Thermally Stable Unimorph SMP Actuators Incorporating Transverse Curvature.- 23 Identification of constitutive model parameters in Hopkinson Bar tests.
Описание: Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 7 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including:Inverse Problems/Hybrid TechniquesMaterial Characterizations Using ThermographyThermoelastic Stress AnalysisFatigue & Damage Evaluation Using Infrared ThermographyIntegration of Infrared Thermography & DICThermographic Non-Destructive Evaluation (NDE)
Описание: Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 7 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including:Inverse Problems/Hybrid TechniquesMaterial Characterizations Using ThermographyThermoelastic Stress AnalysisFatigue & Damage Evaluation Using Infrared ThermographyIntegration of Infrared Thermography & DICThermographic Non-Destructive Evaluation (NDE)
Описание: Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 8: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics, the eighth volume of eight from the Conference, brings together contributions to this important area of research and engineering.
Описание: Residual Stress, Thermomechanics& Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 9 of the Proceedings of the 2015SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering.
Structure and Properties of Additive Manufactured Polymer Components provides a state-of-the-art review from leading experts in the field who discuss key developments that have appeared over the last decade or so regarding the use of additive manufacturing (AM) methods in the production of neat and reinforced polymeric components. A major focus is given to materials science aspects, i.e., how the quality of the polymer preforms, the parameters of the chosen AM method, and how these factors can affect the microstructure and properties of the final product.
The book not only covers production technologies and the relationship between processing, microstructure and fundamental properties of the produced parts, but also gives readers ideas on the use of AM polymer parts in medicine, automotive, aerospace, tribology, electronics, and more.
Автор: Junlan Wang; Bonnie Antoun; Eric Brown; Weinong Ch Название: Mechanics of Additive and Advanced Manufacturing, Volume 9 ISBN: 331987408X ISBN-13(EAN): 9783319874081 Издательство: Springer Рейтинг: Цена: 20962.00 р. Наличие на складе: Поставка под заказ.
Описание: Mechanics of Additive and Advanced Manufacturing, Volume 9 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies, including: Design, Optimization Experiments Computations Materials for Advanced Manufacturing Processes (3D printing, micro- and nano-manufacturing, powder bed fusion, directed energy deposition, etc.) Mechanics Aspects of Advanced Manufacturing (e.g. mechanical properties, residual stress, deformation, failure, rate-dependent mechanical behavior, etc.)
This volume contains a collection of 22 papers submitted from the below seven symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada:
Additive Manufacturing Technologies
Advanced Materials, Technologies, and Devices for Electro-optical and Biomedical Applications
Multifunctional Coatings for Energy and Environmental Applications
Novel, Green, and Strategic Processing and Manufacturing Technologies
Powder Processing Technology for Advanced Ceramics
Computational Design and Modeling
Materials for Extreme Environments: Ultra-high Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
