Описание: Transport Properties of Cubic Cuprous Iodide Films Deposited by Successive Ionic Layer Adsorption and Reaction Preparation, Properties and Application of Miscanthus Nanocellulose as Coating Layer Effect of Thermomechanical and Ultrasonic Treatment on the Properties of Amorphous Alloys Electrical and Magnetic Behavior of GdOH Thin Films: a Search for Hydrogen Anion Superconductivity Electrical Properties of Heterojunction n-MoOx/p-Cd3In2Te6 Phase-structural Condition of the Ti-Al System Treated by Irradiation with Si Ions and Heat Treatment Surface Stress Contrast between Reconstruction and Termination on Silicon (111) Nanostructured Magnesium Oxide Layers Syntesized on Flexible Substrates for Filtering Elements Surface Phosphorylated Activated Carbons: Preparation and Acidity Studies Optical Absorption and Refractive Index of X-ray Irradiated Cu6PSe5I-based Thin Films Formation of New Nanostructures and Their Optical Properties under the Influence of High Pressure and Laser Irradiation Characteristics of Nanocomposites Formed on the Steel Surface Contacting with Precious Metal Solutions Nanocrystalline AlNiCoFeCrTi High-entropy Alloy Resulted from Mechanical Alloying and Annealing RF Plasma Monolayer Doping of Si Nanowires Formation of Aluminum-copper Composite Using High-current Electron Beam Irradiation AlCoNiFeCrTiVх High-entropy Coatings Prepared by Electron-beam Cladding A Novel Method for the Formation of Silver-containing Nanocomposites - Thermochemical Reduction of Ag+ Ions in Polymer Films Application of Multicomponent Wear-Resistant Nanostructures Formed by Electrospark Allowing for Protecting Surfaces of Compression Joints Parts (TiAlSiY)N/MoN Nano-scale Multilayer Coating from Refractory Metal Compounds: Microstructure, Phase Composition and Mechanical Properties New Process for Forming Multicomponent Wear-Resistant Nanostructures by Electrospark Alloying Method Changing Cohesive Energy between Atoms in Metal-to-Metal Transition Layer for Fe-Sn and Fe-Cu-Sn Compounds in the Course of Spark Alloying Process Method for Analysis of the XPS Data Taken from Nanolayered Samples Contact melting in Ag/Ge layered nanofilms: critical thickness and onset temperature Temperature Dependence of Conductivity in Composite Film of Single-walled Carbon Nanotubes with Graphene Oxide Fabrication and pulsed laser modification of antireflective composite materials for the visible and near-IR ranges Photo- end electroluminescence of layered structures based on silicon oxide and nitride films Influence of hydrogen annealing on ordering in FePd films with Ag underlayer The conception and design of polymeric membranes modification technology using surface engineering techniques Multilayer PECVD Si-C-N films Thermal dispergation of Pb-In alloys films on the molybdenum substrate Structure and Properties of Ti-Cr-N Coatings Synthesized by PIII&D Technique Increase of Mechanical Properties of Weld Metal of High-Strength Low-Alloy Steels Effect of Growth Conditions on Stuctural and Optical Properties of SnS2 Thin Film Fabrication of Multicomponent Carbide Coatings by Modified Magnetron Sputter Deposition E
Описание: Transport Properties of Cubic Cuprous Iodide Films Deposited by Successive Ionic Layer Adsorption and Reaction Preparation, Properties and Application of Miscanthus Nanocellulose as Coating Layer Effect of Thermomechanical and Ultrasonic Treatment on the Properties of Amorphous Alloys Electrical and Magnetic Behavior of GdOH Thin Films: a Search for Hydrogen Anion Superconductivity Electrical Properties of Heterojunction n-MoOx/p-Cd3In2Te6 Phase-structural Condition of the Ti-Al System Treated by Irradiation with Si Ions and Heat Treatment Surface Stress Contrast between Reconstruction and Termination on Silicon (111) Nanostructured Magnesium Oxide Layers Syntesized on Flexible Substrates for Filtering Elements Surface Phosphorylated Activated Carbons: Preparation and Acidity Studies Optical Absorption and Refractive Index of X-ray Irradiated Cu6PSe5I-based Thin Films Formation of New Nanostructures and Their Optical Properties under the Influence of High Pressure and Laser Irradiation Characteristics of Nanocomposites Formed on the Steel Surface Contacting with Precious Metal Solutions Nanocrystalline AlNiCoFeCrTi High-entropy Alloy Resulted from Mechanical Alloying and Annealing RF Plasma Monolayer Doping of Si Nanowires Formation of Aluminum-copper Composite Using High-current Electron Beam Irradiation AlCoNiFeCrTiVх High-entropy Coatings Prepared by Electron-beam Cladding A Novel Method for the Formation of Silver-containing Nanocomposites - Thermochemical Reduction of Ag+ Ions in Polymer Films Application of Multicomponent Wear-Resistant Nanostructures Formed by Electrospark Allowing for Protecting Surfaces of Compression Joints Parts (TiAlSiY)N/MoN Nano-scale Multilayer Coating from Refractory Metal Compounds: Microstructure, Phase Composition and Mechanical Properties New Process for Forming Multicomponent Wear-Resistant Nanostructures by Electrospark Alloying Method Changing Cohesive Energy between Atoms in Metal-to-Metal Transition Layer for Fe-Sn and Fe-Cu-Sn Compounds in the Course of Spark Alloying Process Method for Analysis of the XPS Data Taken from Nanolayered Samples Contact melting in Ag/Ge layered nanofilms: critical thickness and onset temperature Temperature Dependence of Conductivity in Composite Film of Single-walled Carbon Nanotubes with Graphene Oxide Fabrication and pulsed laser modification of antireflective composite materials for the visible and near-IR ranges Photo- end electroluminescence of layered structures based on silicon oxide and nitride films Influence of hydrogen annealing on ordering in FePd films with Ag underlayer The conception and design of polymeric membranes modification technology using surface engineering techniques Multilayer PECVD Si-C-N films Thermal dispergation of Pb-In alloys films on the molybdenum substrate Structure and Properties of Ti-Cr-N Coatings Synthesized by PIII&D Technique Increase of Mechanical Properties of Weld Metal of High-Strength Low-Alloy Steels Effect of Growth Conditions on Stuctural and Optical Properties of SnS2 Thin Film Fabrication of Multicomponent Carbide Coatings by Modified Magnetron Sputter Deposition E
Описание: This thesis studies the effects of superplasticizers, polyacrylate latexes and asphalt emulsions, which differ in molecular/particle size from nanometers to microns, on the rheological properties of fresh cement pastes (FCPs), as well as the action mechanisms involved.
Описание: This thesis studies the effects of superplasticizers, polyacrylate latexes and asphalt emulsions, which differ in molecular/particle size from nanometers to microns, on the rheological properties of fresh cement pastes (FCPs), as well as the action mechanisms involved. It systematically investigates the rheological properties and microstructure of cement-based materials, and elucidates the adsorption behaviors of polycarboxylate polymers with different functional groups and their effects on cement hydration. Moreover, it reveals how the working mechanism of naphthalene sulfonate formaldehyde (NSF) differs from that of polycarboxylate ether-based (PCE) superplasticizers. Lastly, it develops a conceptual microstructure model and two rheological equations. These findings lend theoretical support to the development of new chemical admixtures and new, higher-performance, cement-based composites.
Описание: This work presents a summary of knowledge about concrete systems and their modelling, covering the scale and resolution of models; spatial distributions; databases and expert systems; transport mechanisms and the major parameters affecting them; and corrosion mechanisms and parameters.
Автор: Treacy Название: Microstructure and Properties of Catalysts ISBN: 1107410967 ISBN-13(EAN): 9781107410961 Издательство: Cambridge Academ Цена: 4277.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Описание: Introduction.- Influence of mould-metal interactions on the microstructure of castings - literature studies.- Mould sand system in foundry.- Methods of the mould sands quality assessment.- Reclamation of used mould sands.- The mould /casting interface phenomena.- General characteristic of the ductile and compacted graphite cast iron.- Influence of the technological parameters on the microstructure and quality of the castings surface.- Influence of the metal/mould processes on the mechanical parameters of the castings.- Model of the phenomena on the mould/casting interface.
Автор: Harry Bhadeshia Название: Steels: Microstructure and Properties, ISBN: 0750680849 ISBN-13(EAN): 9780750680844 Издательство: Elsevier Science Рейтинг: Цена: 14141.00 р. Наличие на складе: Поставка под заказ.
Описание: Steels represent the most widely-used metallic alloy. This work covers the microstructure, mechanical behaviour and properties of steels. It includes chapters on nanostructured steels, and alloys and technologies for the energy and automobile industries. It also presents extensive bibliographies and real-life examples.
Titanium Alloys for Biomedical Development and Applications: Design, Microstructure, Properties and Application systematically introduces basic theories and progress in the research of biomedical -Ti alloys achieved by researchers from different fields. It focuses on a high-strength and low elastic modulus biomedical -Ti alloy (TLM), etc. designed by the authors. The alloy design methods, microstructural characteristics, mechanical properties, surface treatment methods and biocompatibility of the TLM alloy are discussed in detail, along with a concise description of the medical devices made from this alloy and the application examples.
This book will appeal to researchers as well as students from different disciplines, including materials science, biology, medicine and engineering fields.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
