Advances in Abrasive Based Machining and Finishing Processes, Das S., Kibria G., Doloi B.
Автор: Andreas W. Momber; Radovan Kovacevic Название: Principles of Abrasive Water Jet Machining ISBN: 1447115740 ISBN-13(EAN): 9781447115748 Издательство: Springer Рейтинг: Цена: 15672.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Abrasive water jet machining was introduced to manufacturing ten years ago and has been increasingly used for treating hard-to-machine and multi-layered materials and as an alternative tool for milling, turning, drilling and polishing.
Автор: J. Paulo Davim Название: Traditional Machining Processes ISBN: 3662523817 ISBN-13(EAN): 9783662523810 Издательство: Springer Рейтинг: Цена: 14365.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Chapter 2 is dedicated to the analysis of orthogonal cutting experiments using diamond-coated tools with force and temperature measurements. Finally, chapter 7 is dedicated to flexible integration of shape and functional modelling of machine tool spindles in a design framework.
Автор: J. Paulo Davim Название: Nontraditional Machining Processes ISBN: 1447159330 ISBN-13(EAN): 9781447159339 Издательство: Springer Рейтинг: Цена: 19589.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book explores techniques and processes that aim to achieve high accuracies and good surface finishes, parts machined without burrs or residual stresses especially with materials that cannot be machined by conventional methods.
Автор: Hans Kurt Toenshoff; Berend Denkena Название: Basics of Cutting and Abrasive Processes ISBN: 3642447007 ISBN-13(EAN): 9783642447006 Издательство: Springer Рейтинг: Цена: 20896.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Cutting and abrasive technologies are the backbone of precision production in machine, automotive and aircraft building as well as of production of consumer goods. This book presents the knowledge of modern manufacturing in these technologies.
Автор: Shaw, Milton Название: Principles of abrasive processing ISBN: 0198590210 ISBN-13(EAN): 9780198590217 Издательство: Oxford Academ Рейтинг: Цена: 36498.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Grinding is one of the most important operations employed in production engineering to remove unwanted material and to introduce desired geometry and surface properties. Once considered only a secondary finishing operation, grinding is now more widely employed. This work discusses the principles.
Автор: Prakash Mahadeo Dixit; U.S. Dixit Название: Modeling of Metal Forming and Machining Processes ISBN: 1849967490 ISBN-13(EAN): 9781849967495 Издательство: Springer Рейтинг: Цена: 30039.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Written by authorities in the subject, this book provides a complete treatment of metal forming and machining by using the computational techniques FEM, fuzzy set theory and neural networks as modelling tools.
Название: Non-conventional hybrid machining processes ISBN: 0367139138 ISBN-13(EAN): 9780367139131 Издательство: Taylor&Francis Рейтинг: Цена: 25265.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This new book covers process optimization, process capability for hybrid NCMP (Non-Conventional Machining Processes), and combines NCMP and CMRP (Conventional Machining Removal Processes) along with cost analysis for various hybridized processes.
Автор: Grzesik Wit Название: Advanced Machining Processes of Metallic Materials ISBN: 0444637117 ISBN-13(EAN): 9780444637116 Издательство: Elsevier Science Рейтинг: Цена: 29139.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality.
In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity.
This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications.
The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology.
Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry
Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels
Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity
Автор: Golam Kibria; Muhammad P. Jahan; B. Bhattacharyya Название: Micro-electrical Discharge Machining Processes ISBN: 9811330735 ISBN-13(EAN): 9789811330735 Издательство: Springer Рейтинг: Цена: 19564.00 р. Наличие на складе: Поставка под заказ.
Описание: This book offers a comprehensive collection of micro electrical discharge machining (EDM) processes, including hybrid processes. It discusses the theory behind each process and their applications in various technological as well as biomedical domains, and also presents a brief background to various micro EDM processes, current research challenges, and detailed case studies of micro-manufacturing miniaturized parts. The book serves as a valuable guide for students and researchers interested in micro EDM and other related processes.
Автор: Sumit Bhowmik; Divya Zindani Название: Hybrid Micro-Machining Processes ISBN: 303013038X ISBN-13(EAN): 9783030130381 Издательство: Springer Рейтинг: Цена: 6986.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book presents some of the recent hybrid micro-machining processes used to manufacture miniaturized products with micro level precision. The current developed technologies to manufacture the micro dimensioned products while meeting the desired precision level are described within the text. The authors especially highlight research that focuses on the development of new micro machining platforms while integrating the different technologies to manufacture the micro components in a high throughput and cost effective manner.
Автор: Kumar Название: Advanced Machining and Manufacturing Processes ISBN: 3319760742 ISBN-13(EAN): 9783319760742 Издательство: Springer Рейтинг: Цена: 13974.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book covers the various advanced manufacturing processes employed by manufacturing industries to improve their productivity in terms of socio-economic development.The authors present automated conventional and non-conventional machining techniques as well as virtual machining principles and techniques. Material removal by mechanical, chemical, thermal and electrochemical processes are described in detail. A glossary of key concepts is attached at end of the book.
Автор: Huda, Zainul (department Of Mechanical Engineering, King Abdulaziz University, Jeddah, Saudi Arabia) Название: Machining processes and machines ISBN: 0367532697 ISBN-13(EAN): 9780367532697 Издательство: Taylor&Francis Рейтинг: Цена: 22202.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Machining is one of the eight basic manufacturing processes. This textbook covers the fundamentals and engineering analysis of both conventional and advanced material removal processes along with gear cutting/manufacturing and computer numerically controlled (CNC) machining.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
