A Practical Guide to Piping and Valves for the Oil and Gas Industry covers how to select, test and maintain the right oil and gas valve. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection. Covering both onshore and offshore projects, the book also gives an introduction to the most common types of corrosion in the oil and gas industry, including CO2, H2S, pitting, crevice, and more. A model to evaluate CO2 corrosion rate on carbon steel piping is introduced, along with discussions on bulk piping components, including fittings, gaskets, piping and flanges.
Rounding out with chapters devoted to valve preservation to protect against harmful environments and factory acceptance testing, this book gives engineers and managers a much-needed tool to better understand today's valve technology.
Prevention of Valve Fugitive Emissions in the Oil and Gas Industry delivers a critical reference for oil and gas engineers and managers to get up-to-speed on all factors surrounding valve fugitive emissions. New technology is included on monitoring, with special attention given to valve seals which are typically the biggest emitting factor on the valve. Proper testing requirements to mitigate future leaks are also covered. Rounding out with international standards, laws and specifications to apply to projects around the world, this book gives today's engineers updated knowledge on how to lower emissions on today's equipment.
Helps readers understand the sources and key factors that contribute to fugitive emissions and leakage from oil and gas valves
Teaches ways to select proper seals and perform valve testing to mitigate future emissions
Includes international standards, laws and specifications to help readers stay compliant and environmentally responsible
Автор: Ponte Jr, Gerardo Portela Название: Risk Management In The Oil And Gas Industry ISBN: 0128235330 ISBN-13(EAN): 9780128235331 Издательство: Elsevier Science Рейтинг: Цена: 18864.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Risk Management in the Oil and Gas Industry: Offshore and Onshore Concepts and Case Studies delivers the concepts, strategies and good practices of offshore and onshore safety engineering that are applicable to petroleum engineering and immediately surrounding industries. Guided by the strategic risk management line, this reference organizes steps in order of importance and priority that should be given to the themes in the practical exercise of risk management activities, from the conceptual and design phase to operational and crisis management situations. Each chapter is packed with practical case studies, lessons learned, exercises, and review questions.
The reference also touches on the newest techniques, including liquefied natural gas (cryogenics) operations and computer simulations that contemplate the influence of human behavior. Critical for both the new and experienced engineer, this book gives the best didactic tool to perform operations safely and effectively.
Автор: Phil Andrews Название: Education and Training for the Oil and Gas Industry ISBN: 0128009802 ISBN-13(EAN): 9780128009802 Издательство: Elsevier Science Рейтинг: Цена: 11620.00 р. Наличие на складе: Поставка под заказ.
Описание:
Education and Training for the Oil and Gas Industry: Localising Oil and Gas Operations, Volume Four in the Getenergy series will set out the case for localising the oil and gas operations within hydrocarbon-producing countries. The focus of this final Volume in the series will be to explore the value of engaging with local suppliers, local talent and other local stakeholders in the exploration and production of oil and gas resources. Specifically, we will set out an agenda around which operators and service companies can coalesce and that highlights the ways in which smart, targeted investments in education, training and local infrastructure can create a new way of doing business, particularly in developing or emerging energy economies. Getenergy Intelligence have developed a unique tool to evaluate the potential cost benefits of localisation for any given project. This volume lays out the rationale, methodology and processes we have developed to successfully map out localisation and implement strategic capacity development for oil and gas operations.
The significant cost benefits of localisation have been recognised by a number of major oil and gas companies, but localisation is still an aspect of doing business that is poorly understood by much of the global industry. In the first section of this book, the authors provide the rationale for localisation and layout the core reasons for developing the tool. In the second section, the tool is described and the exact methodology is explained. In the final section the authors provide three case studies, demonstrating the tool in action and showing how we are able to measure the cost effectiveness and wider value of a coherent approach to localisation.
Автор: Sotoodeh Karan Название: Subsea Valves and Actuators for the Oil and Gas Industry ISBN: 0323906052 ISBN-13(EAN): 9780323906050 Издательство: Elsevier Science Рейтинг: Цена: 22065.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today's subsea technology.
Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies
Learn and review the applicable standards and specifications from API and ISO in one convenient location
Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)
Автор: Mohamed A. El-Reedy Название: Project Management in the Oil and Gas Industry ISBN: 1119083613 ISBN-13(EAN): 9781119083610 Издательство: Wiley Рейтинг: Цена: 26128.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Oil and gas projects have special characteristics that need a different technique in project management. The development of any country depends on the development of the energy reserve through investing in oil and gas projects through onshore and offshore exploration, drilling, and increasing facility capacities. Therefore, these projects need a sort of management match with their characteristics, and project management is the main tool to achieving a successful project.
Written by a veteran project manager who has specialized in oil and gas projects for years, this book focuses on using practical tools and methods that are widely and successfully used in project management for oil and gas projects. Most engineers study all subjects, but focus on project management in housing projects, administration projects, and commercial buildings or other similar projects. However, oil and gas projects have their own requirements and characteristics in management from the owners, engineering offices, and contractors' side.
Not only useful to graduating engineers, new hires, and students, this volume is also an invaluable addition to any veteran project manager's library as a reference or a helpful go-to guide. Also meant to be a refresher for practicing engineers, it covers all of the project management subjects from an industrial point of view specifically for petroleum projects, making it the perfect desktop manual.
Not just for project managers and students, this book is helpful to any engineering discipline or staff in sharing or applying the work of a petroleum project and is a must-have for anyone working in this industry.
Описание: This volume, originally published in 1984, analyzes the impact of the 1973-74 oil price increases on the Appalachian coal industry in the USA, which would otherwise have suffered large output reductions as a result of sulfur emission restrictions. Although focussed on a particular geographical region and timeframe, this book has enduring relevance as it analyzes and discusses many of the issues which are still facing the ailing coal mining industries both in the USA and globally: the advent of new energy forms, increased competition from cheaper sources, strict pollution legislation and the impact that all of these issues have on productivity and employment.
Data Room Management and Rapid Asset Evaluation - Theory and Case Studies in Oil and Gas, Volume 66 introduces frameworks and workflows that help streamline the data room process, highlight the essential data that must be assembled in the permitted time window, and accelerate the subsequent assessment of the opportunity. The book combines theory with case studies, some of which describe lessons learned directly by the author himself. Methodologies are presented that can be used immediately by those involved in the technical and commercial evaluation of oil and gas exploration and production ventures.
The book is suitable for readers with a wide spectrum of experience, from those who are newcomers to the strange world of data rooms, to those diehards who may have spent too many hours in them. The purposes, strategies, and tactics of data rooms are explained, along with some suggestions on how to survive them, and how to get a fit-for-purpose evaluation in front of the decision makers in the shortest timeframe possible.
Автор: Patrick Bangert Название: Machine learning and data science in the oil and gas industry ISBN: 0128207140 ISBN-13(EAN): 9780128207147 Издательство: Elsevier Science Рейтинг: Цена: 18864.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Machine Learning and Data Science in the Oil and Gas Industry explains how machine learning can be specifically tailored to oil and gas use cases. Petroleum engineers will learn when to use machine learning, how it is already used in oil and gas operations, and how to manage the data stream moving forward. Practical in its approach, the book explains all aspects of a data science or machine learning project, including the managerial parts of it that are so often the cause for failure. Several real-life case studies round out the book with topics such as predictive maintenance, soft sensing, and forecasting. Viewed as a guide book, this manual will lead a practitioner through the journey of a data science project in the oil and gas industry circumventing the pitfalls and articulating the business value.
Chart an overview of the techniques and tools of machine learning including all the non-technological aspects necessary to be successful
Gain practical understanding of machine learning used in oil and gas operations through contributed case studies
Learn change management skills that will help gain confidence in pursuing the technology
Understand the workflow of a full-scale project and where machine learning benefits (and where it does not)
Автор: Dhillon, B.S. Название: Safety and Reliability in the Oil and Gas Industry ISBN: 0367875292 ISBN-13(EAN): 9780367875299 Издательство: Taylor&Francis Рейтинг: Цена: 8879.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Each year billions of dollars are spent in the area of oil and gas to design, construct/manufacture, operate, and maintain equipment/systems around the globe. Safety and reliability has become an important issue due to various types of accidents and problems over the years. There has been a large number of articles on safety and reliability in t
Описание: Written by some of the world s most renowned petroleum andenvironmental engineers, Petrophysics: The Fundamentals of Oiland Gas Revervoirs is the first book to offer the practicingengineer and engineering student these new cutting-edge techniquesfor prediction and forecasting in petroleum engineering andenvironmental management.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
