Process Operational Safety and Cybersecurity: A Feedback Control Approach, Wu Zhe, Christofides Panagiotis D.
Автор: Farzin Asadi, Robert E. Bolanos, Jorge Rodriguez Название: Feedback Control Systems: The MATLAB®/Simulink® Approach ISBN: 1681735393 ISBN-13(EAN): 9781681735399 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 15523.00 р. Наличие на складе: Нет в наличии.
Описание: Feedback control systems is an important course in aerospace engineering, chemical engineering, electrical engineering, mechanical engineering, and mechatronics engineering, to name just a few. Feedback control systems improve the system's behavior so the desired response can be achieved. The first course on control engineering deals with Continuous Time (CT) Linear Time Invariant (LTI) systems. Plenty of good textbooks on the subject are available on the market, so there is no need to add one more. This book does not focus on the control engineering theories as it is assumed that the reader is familiar with them, i.e., took/takes a course on control engineering, and now wants to learn the applications of MATLAB ® in control engineering. The focus of this book is control engineering applications of MATLAB ® for a first course on control engineering.
Автор: Farzin Asadi, Robert E. Bolanos, Jorge Rodriguez Название: Feedback Control Systems: The MATLAB®/Simulink® Approach ISBN: 1681735415 ISBN-13(EAN): 9781681735412 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 18572.00 р. Наличие на складе: Нет в наличии.
Описание: Feedback control systems is an important course in aerospace engineering, chemical engineering, electrical engineering, mechanical engineering, and mechatronics engineering, to name just a few. Feedback control systems improve the system's behavior so the desired response can be achieved. The first course on control engineering deals with Continuous Time (CT) Linear Time Invariant (LTI) systems. Plenty of good textbooks on the subject are available on the market, so there is no need to add one more. This book does not focus on the control engineering theories as it is assumed that the reader is familiar with them, i.e., took/takes a course on control engineering, and now wants to learn the applications of MATLAB ® in control engineering. The focus of this book is control engineering applications of MATLAB ® for a first course on control engineering.
Описание: Chapter 1. Introduction.- Chapter 2. Stabilizing Controllers, Tracking, and Disturbance Rejection.- Chapter 3. H2 Design of Multivariable Control Systems.- Chapter 4. H2 Design of Multivariable Control Systems with Decoupling.- Chapter 5. Numerical Calculation of Wiener-Hopf Controllers.
Описание: Abstract: In order to take full advantage of the introduction of computer numerical control technology in camshaft grinding and post-process inspection, a closed loop control scheme is proposed. This strategy makes use of post-process inspection results to modify the commanded part geometry used in the grinding program. The commands are modified in order to minimize the lobe contour and relative timing errors. It is shown that using a control strategy comprised of feedforward and feedback elements, substantial improvements in cam contour accuracy can be attained. A system capable of automated reduction of inspection results, application of statistical methods, transformations between different coordinate systems, and production of modified commanded part geometry is presented. This system requires no off-l;ine calibration or learning of grinding machin positioning errors. Additionally, it offers advantages over such techniques, in that it is able to automatically adapt to changing process conditions. the sytem is general in nature and may be used for any camshaft design. Through application of this system, the time required to bring a new part into tolerance is greatly reduced. With such a system used to minimize contour errors, it is no longer necessary to optimize grinding parameters based on these errors. Rather, grinding parameters can be manipulated to optimize other important factors, such as metal removal rates and the corresponding process time. Implementation of this system on existing computer numerically controlled (CNC) equipment is inexpensive. It requires only software necessary to produce the modified part geometry and limited hardware for file transfer. The required hardware is inexpensive and readily available. Dissertation Discovery Company and University of Florida are dedicated to making scholarly works more discoverable and accessible throughout the world. This dissertation, "Improved Process Control in Camshaft Grinding Through Utilization of Post Process Inspection With Feedback" by timothy mark Dalrymple, was obtained from University of Florida and is being sold with permission from the author. A digital copy of this work may also be found in the university's institutional repository, IR@UF. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation.
Описание: Bulent Sari deals with the various fail-operational safety architecture methods developed with consideration of domain ECUs containing multicore processors and describes the model-driven approaches for the development of the safety lifecycle and the automated DFA.
Описание: Process Control System Fault Diagnosis: A Bayesian Approach Ruben T. Gonzalez, University of Alberta, Canada Fei Qi, Suncor Energy Inc.
Автор: Svrcek William Y. Название: Real-Time Approach to Process Control ISBN: 1119993873 ISBN-13(EAN): 9781119993872 Издательство: Wiley Рейтинг: Цена: 21534.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This third edition presents a theoretical and practical introduction to this increasingly important approach to process control. Assuming no prior knowledge, the text covers the applied fundamentals of process control, from instrumentation to process dynamics, PID loops, and tuning to distillation, multi-loop, and plant-wide control.
Описание: Chapter 1. Introduction.- Chapter 2. Stabilizing Controllers, Tracking, and Disturbance Rejection.- Chapter 3. H2 Design of Multivariable Control Systems.- Chapter 4. H2 Design of Multivariable Control Systems with Decoupling.- Chapter 5. Numerical Calculation of Wiener-Hopf Controllers.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
