Modern Trends in Research on Steel, Aluminium and Composite Structures: Proceedings of the XIV International Conference on Metal Structures (Icms2021), Giżejowski Marian A., Kozlowski Aleksander, Chybiński Marcin
Описание: This volume contains the proceedings of the 13th International Conference on Damage Assessment of Structures DAMAS 2019, 9-10 July 2019, Porto, Portugal. It presents the expertise of scientists and engineers in academia and industry in the field of damage assessment, structural health monitoring and non-destructive evaluation. The proceedings covers all research topics relevant to damage assessment of engineering structures and systems including numerical simulations, signal processing of sensor measurements and theoretical techniques as well as experimental case studies.
Автор: Vellasco, Pedro Название: Modeling Steel and Composite Structures ISBN: 0128135263 ISBN-13(EAN): 9780128135266 Издательство: Elsevier Science Рейтинг: Цена: 17517.00 р. Наличие на складе: Поставка под заказ.
Описание:
Modeling Steel and Composite Structures explains the computational tools, methods and procedures used to design steel and composite structures. The reference begins with the main models used to determine structural behavior. This is followed by a detailed description of experimental models and their main requirements and care. Numerous simulations presenting non-linear response are illustrated as are their restrictions in terms of boundary conditions, main difficulties, solution strategies and methods adopted to surpass convergence difficulties. In addition, examples of the use of computational intelligence methods to simulate steel and composite structures response are presented.
Includes numerical models based in the finite element method
Provides numerous simulations, presenting a non-linear response
Contains examples of the use of computational intelligence methods to simulate steel and composite structures
Автор: Liang Qing Quan Название: Analysis and Design of Steel and Composite Structures ISBN: 0415532205 ISBN-13(EAN): 9780415532204 Издательство: Taylor&Francis Рейтинг: Цена: 13779.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Steel and composite steel-concrete structures are widely used in modern bridges, buildings, sport stadia, towers, and offshore structures. Analysis and Design of Steel and Composite Structures offers a comprehensive introduction to the analysis and design of both steel and composite structures. It describes the fundamental behavior of steel and composite members and structures, as well as the current design criteria and procedures given in Australian standards AS/NZS 1170, AS 4100, AS 2327.1, Eurocode 4, and AISC-LRFD specifications.
Featuring numerous step-by-step examples that clearly illustrate the detailed analysis and design of steel and composite members and connections, this practical and easy-to-understand text:
Covers plates, members, connections, beams, frames, slabs, columns, and beam-columns
Considers bending, axial load, compression, tension, and design for strength and serviceability
Incorporates the author's latest research on composite members
Analysis and Design of Steel and Composite Structures is an essential course textbook on steel and composite structures for undergraduate and graduate students of structural and civil engineering, and an indispensable resource for practising structural and civil engineers and academic researchers. It provides a sound understanding of the behavior of structural members and systems.
Автор: Renwick Sally Название: Deterioration, Structures and Analysis of Aluminium Alloys ISBN: 1632381168 ISBN-13(EAN): 9781632381163 Издательство: Неизвестно Цена: 17702.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: There has been a breakthrough in the production of aluminium alloys. New procedures of welding, casting, forming and surface modification have emerged to advance structural integrity of aluminium alloys. The book covers major topics grouped under two sections namely, "Corrosion and Mechanical Damage on Aluminium Alloys" and "Micro-Nano Structures and Image Analysis". This book aims to serve the needs of a broad spectrum of professionals ranging from academic to industrial communities by providing latest information. It also serves the purpose of assisting technocrats, entrepreneurs and other individuals interested in the application and production of aluminium alloys.
Описание: This book presents articles from The Australasian Conference on the Mechanics of Structures and Materials (ACMSM25 held in Brisbane, December 2018), celebrating the 50th anniversary of the conference.
Описание: The present volume is dedicated to the topic "New materials and structures for ultra-durability", which covers current scientific and technological developments aimed at improving knowledge about degradation mechanisms in construction materials, as well as to the development of new materials with extreme durability.
Описание: Chapter1. Techniques for Verification of Structural Acoustic Models, - Chapter2. Substructuring of Viscoelastic Subcomponents with Interface Reduction.- Chapter3. Parameter Estimation of Joint Models Using Global Optimization.- Chapter4. Real Time Hybrid Simulation of an Unmanned Aerial Vehicle.- Chapter5. An Integration of Mixed Contact Formulation with Model-Reduction Techniques.- Chapter6. Identification Reassembly Uncertainties for a Basic Lap Joint.- Chapter7. Effect of Far-field Structure on Joint Properties.- Chapter8. Real-time Hybrid Model Testing of Moored Floating Structures Using Nonlinear Finite Element Simulations. Chapter9. DIC Measurement of the Kinematics of a Friction Damper for Turbine Applications.- Chapter10. A Simultaneous Iterative Scheme for the Craig-Bampton Reduction Based Substructuring.- Chapter11. Using Blocked Force Data for Vibro-Acoustic Prediction and Simulation.- Chapter12. CMS with Large Contact Patches.- Chapter13. In Situ Measurements of Contact Pressure for Jointed Interfaces During Dynamic Loading Experiments.- Chapter14. Dual Craig-Bampton Method with Reduction of Interface Coordinates.- Chapter15. Substructuring of a Nonlinear Beam Using a Modal Iwan Framework, Part I: Nonlinear Modal Model Identification.- Chapter16. Substructuring of a Nonlinear Beam Using a Modal Iwan Framework, Part II: Nonlinear Modal Substructuring.- Chapter17. Dynamic Decoupling of Nonlinear Systems.- Chapter18. Nonlinear Substructuring Using Fixed Interface Nonlinear Normal Modes.- Chapter19. Dynamic Substructuring of Geometrically Nonlinear Finite Element Models Using Residual Flexibility Modes.- Chapter20. Optimal Transformation of Frequency Response Functions on Interface Deformation Modes.- Chapter21. A Recursive Coupling-decoupling Approach to Improve Experimental Frequency Based Substructuring Results.- Chapter22. Experimental Assessment of the Influence of Interface Geometries on Structural Dynamic Response.- Chapter23. Nonlinear Finite Element Model Updating, Part I: Experimental Techniques and Nonlinear Modal Model Parameter Extraction.- Chapter24. A Simpler Formulation for Effective Mass Calculated from Experimental Free Mode Shapes of a Test Article on a Fixture.- Chapter25. Nonlinear Finite Element Model Updating, Part II: Implementation and Simulation.- Chapter26. A Benchmark Structure for Validation of Experimental Substructuring, Transfer Path Analysis and Source Characterisation Techniques.- Chapter27. Nonlinear Modal Substructuring of Panel and Stiffener Assemblies via Characteristic Constraint Modes.- Chapter28. Experimental Evaluation of Multi-functional Nonlinear Floor Isolation Systems.- Chapter29. Variability of Dynamic Response in Jointed Structures.- Chapter30. Predicting the Dynamics of Flexible Space Payloads Under Different Boundary Conditions Through Substructure Decoupling.- Chapter31. Evolutionary Identification of Block-Structured Systems.- Chapter32. Modal Analysis of Transmission Line Cables.
Описание: Chapter1. Semi-active Base Isolation of Civil Engineering Structures Based on Optimal Viscous Damping and Zero Dynamic Stiffness.- Chapter2. Long-Term Performance of Specialized Fluid Dampers Under Continuous Vibration on a Pedestrian Bridge.- Chapter3. Analysis of Variation Rate of Displacement to Temperature of Service Stage Cable-Stayed Bridge Using Temperatures and Displacement Data.- Chapter4. Triple Friction Pendulum: Does it Improve the Isolation Performance?.- Chapter5. Experimental Investigation of the Dynamic Characteristics of a Glass-FRP Suspension Footbridge.- Chapte6. Vibration-based Occupant Detection Using a Multiple-model Approach.- Chapter7. Vibration Assessment and Control in Technical Facilities using an Integrated Multidisciplinary Approach.- Chapter8. Iterative Pole-Zero Model Updating Using Multiple Frequency Response Functions.- Chapter9. Vision-Based Concrete Crack Detection Using a Convolutional Neural Network.- Chapter10. Analytical and Experimental Analysis of Rocking Columns Subject to Seismic Excitation.- Chapter11. Extending the Fixed-Points Technique for Optimum Design of Rotational Inertial Tuned Mass Dampers.- Chapter12. Temperature Effects on the Modal Properties of a Suspension Bridge.- Chapter13. Mass Scaling of Mode Shapes Based on the Effect of Traffic on Bridges: A Numerical Study.- Chapter14. Covariance-driven Stochastic Subspace Identification of an End-supported Pontoon Bridge Under Varying Environmental Conditions.- Chapter15. Probabilistic Analysis of Human-Structure Interaction in the Vertical Direction for Pedestrian Bridges.- Chapter16. Effects of Seismic Retrofit on the Dynamic Properties of a 4-Storey Parking Garage.- Chapter17. Analytical and Experimental Study of Eddy Current Damper for Vibration Suppression in a Footbridge Structure.- Chapter18. Nonlinear Damping in Floor Vibrations Serviceability: Verification on a Laboratory Structure.- Chapter19. Addressing Parking Garage Vibrations for the Design of Research and Healthcare Facilities.- Chapter20. Modeling and Measurement of a Pedestrian's Center-of-mass Trajectory.- Chapter21. Evaluation of Mass-Spring-Damper Models for Dynamic Interaction between Walking Humans and Civil Structures.- Chapter22. Numerical Model for Human Induced Vibrations.- Chapter23. Dynamic Testing on the new Ticino Bridge of the A4 Highway.- Chapter24. Predicting Footbridge Vibrations Using a Probability-based Approach.- Chapter25. Flooring-systems and Their Interaction with Usage of the Floor.- Chapter26. Bechmark Problem for Assessing Effects of Human-structure Interaction in Footbridges.- Chapter27. A Discrete-Time Feedforward-Feedback Compensator for Real-Time Hybrid Simulation.- Chapter28. Sensing and Rating of Vehicle-Railroad Bridge Collision. Chapter29. High-Frequency Impedance Measurements for Microsecond State Detection.- Chapter30. Structural Stiffness Identification of Skewed Slab Bridges with Limited Information for Load Rating Purpose.- Chapter31. Online Systems Parameters Identification for Structural Monitoring Using Algebraic Techniques.- Chapter32. Structural Vibration Control Using High Strength and Damping Capacity Shape Memory Alloys.- Chapter33. Comparative Study on Modal Identification of a 10 Story RC Structure Using Free, Ambient, and Forced Vibration Data.- Chapter34. Kronecker Product Formulation for System Identification of Discrete Convolution Filters.- Chapter35. Calibration-Free Footstep Frequency Estimation using Structural Vibration.- Chapter36. Optimal Bridge Displacement Controlled by Train Speed on Real-Time.- Chapter37. System Identification and Structural Modeling of Italian School Buildings.- Chapter38. Investigation of Transmission of Pedestrian-Induced Vibration into a Vibration-sensitive Experimental Facility.- Chapter39. An Ambient Vibration Test of an R/C Wall of an 18-story Wood Building at the UBC Campus.- Chapter40. The Day the Earth Shook: Controlling Construction-Induced Vibrations in
Описание: This book gathers peer-reviewed contributions presented at the 3rd RILEM Spring Convention and Conference, held at Guimar?es and hosted by the University of Minho, Portugal, on March 9-14, 2020. The theme of the Conference was “Ambitioning a Sustainable Future for Built Environment: comprehensive strategies for unprecedented challenges”, which was aimed at discussing current challenges and impacts of the built environment on sustainability. The present volume is dedicated to the topic “Service life extension of existing structures”, which covers the most recent scientific and technological developments in the understanding of the evolution and degradation of construction materials and structural systems. Analytical and numerical, as well as experimental approaches, aimed at characterizing, modelling and predicting the evolution of the physical, chemical and mechanical properties of construction materials and structural systems are regarded. Multiphysics models are also considered, as well as other strategies that contribute for an accurate characterization and prediction the service life and the evolution of existing and novel construction materials under normal or extreme environmental exposure or loading conditions. New strategies to promote the smart repairing or the recovery of material properties, as well as the service life extension, are also considered. The following subtopics are included: service life models and multiphysics approaches; smart structures, innovative monitoring and intervention strategies; management and optimized maintenance strategies; integrated rehabilitation and strengthening approaches.
Автор: Johnson R P, Remig Valentina M, Rhodes Sara S, Название: Composite Structures of Steel and Concrete ISBN: 1405100354 ISBN-13(EAN): 9781405100359 Издательство: Wiley Рейтинг: Цена: 13773.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book sets out the basic principles of composite construction with reference to beams, slabs, columns and frames, and their applications to building structures. It deals with the problems likely to arise in the design of composite members in buildings, and relates basic theory to the design approach of Eurocodes 2, 3 and 4.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
