Powder Technology in Plastics Processing, Anthony Chi-Ying Wong
Автор: Kent, Robin Название: Cost Management in Plastics Processing ISBN: 0081022697 ISBN-13(EAN): 9780081022696 Издательство: Elsevier Science Рейтинг: Цена: 26949.00 р. Наличие на складе: Поставка под заказ.
Описание:
Cost Management in Plastics Processing: Strategies, Targets, Techniques, and Tools, Fourth Edition, will make you think about your current practices and how to go forward with effective cost management. This is a practical workbook providing a structured approach to reducing costs in plastics processing for all the major plastics shaping processes (moulding, extrusion, forming) as well as elsewhere in the company (e.g., in factory services and non-manufacturing areas).
Competition in all manufacturing sectors is increasing, and there is continuous pressure to drive costs down and to increase cost management. Good cost management improves profits and margins, improves management control and opens the door to becoming a world-class company. The approach throughout the book is to look rigorously at where costs are incurred and to propose projects and targets for cost reduction. The book is designed to provide a well-structured map broken down into simple tasks and achievable goals.
The book provides a structured approach to the techniques of cost management, from how costs are calculated by accountants, to the effective use of machines and labor, to the minimization of waste. It begins by looking at traditional methods of accounting and costing and whether these are helpful or accurate for project management. Practical examples of cost management in plastics processing are included, together with many useful flow charts and diagrams to illustrate the points under discussion.
Enables plastics processors to institute an effective cost management system, going beyond simply trying to cut costs
Provides a holistic perspective on cost management, shining a light on areas on costs which may not have previously been considered or accounted for, and proposing projects and targets for cost reduction
Serves as a route map to help companies move toward improved margins and greater profitability
Автор: Chris Defonseka Название: Processing of Polymers ISBN: 3110656116 ISBN-13(EAN): 9783110656114 Издательство: Walter de Gruyter Цена: 16169.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Polymers are converted into finished products through a series of steps which include mixing in additives and various types of forming. Following an introduction to polymer science and its importance to various fields, the author describes these processes from a practical, application-oriented perspective. Global suppliers of raw materials, machinery and equipment are also given, making this book an invaluable resource for industry practitioners.
Автор: Peters Robert Название: Noise in the Plastics Processing Industry ISBN: 0367657007 ISBN-13(EAN): 9780367657000 Издательство: Taylor&Francis Рейтинг: Цена: 7654.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This practical guide covers reducing machinery noise and the risk of noise-induced hearing damage, with case studies -- sound insulating, sound-absorbing materials, vibration isolation and damping, and active noise control. And environmental noise, EU regulations, hearing protection, prediction of noise levels, and quieter workplaces.
Автор: Kent, Robin Название: Energy Management in Plastics Processing ISBN: 0081025076 ISBN-13(EAN): 9780081025079 Издательство: Elsevier Science Рейтинг: Цена: 30318.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Energy Management in Plastics Processing: Strategies, Targets, Techniques, and Tools, Third Edition, addresses energy benchmarking and site surveys, how to understand energy supplies and bills, and how to measure and manage energy usage and carbon footprinting. The book's approach highlights the need to reduce the kWh/kg of materials processed and the resulting permanent reductions in consumption and costs. Every topic is covered in a 2-page spread, providing the reader with clear actions and key tips for success. This revised third edition covers new developments in energy management, power supply considerations, automation, assembly operations, water footprinting, and transport considerations, and more.
Users will find a practical workbook that not only shows how to reduce energy consumption in all the major plastics shaping processes (moulding, extrusion, forming), but also provides tactics that will benefit other locations in plants (e.g. in factory services and nonmanufacturing areas).
Enables plastics processors in their desire to institute an effective energy management system, both in processing and elsewhere in the plant
Provides a holistic perspective, shining a light on areas where energy management methods may have not been previously considered
Acts as a roadmap to help companies move towards improved sustainability and cost savings
Автор: Bajpai Pramendra Kumar Название: Processing of Natural Fibre Reinforced Bio-Composites ISBN: 9388320085 ISBN-13(EAN): 9789388320085 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 17325.00 р. Наличие на складе: Нет в наличии.
Описание: Bio-composites have seen a gradual grow in recent years over conventional polymer composites due to the fact that these are lesser or non-harmful to the environment depending on its constituents.
This book covers various dimensions of bio-composites. It includes discussion on constituents of bio-composites, fabrication techniques, application, characterization and other aspects. It also covers various aspects in the field of research and development of bio-composites.
The book is supportive for researchers, technologist and academicians working in the field of bio-composites.
Автор: Munstedt Helmut Название: Elastic Behavior of Polymer Melts: Rheology and Processing ISBN: 1569907544 ISBN-13(EAN): 9781569907542 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 27587.00 р. Наличие на складе: Нет в наличии.
Описание: Understanding the elastic properties of polymer melts is necessary for ensuring successful polymer processing and thus producing high-quality plastic parts. This book is the first to focus on this important topic. Experimental methods and the dependence of elastic behavior on experimental parameters are then presented. Elastic properties of filled and unfilled systems are also directly and polymer blends are also considered. The effects of these effects are included in the plastics processing industry, such as extrudate swells, internal stresses, and shrink films.
Автор: Sandra Van Vlierberghe, Arn Mignon Название: Superabsorbent Polymers: Chemical Design, Processing and Applications ISBN: 1501519107 ISBN-13(EAN): 9781501519109 Издательство: Walter de Gruyter Рейтинг: Цена: 15053.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
The book defines the differences between synthetic and natural superabsorbent polymers. It describes polymerization techniques, processing strategies and the use and importance of smart SAPs. It also includes SAP design to aid in selection of the best SAP for a specific application. The book is an indispensible resource for any academics and industrials interested in SAPs.
Название: Injection Molding Processing Data 2e ISBN: 1569906661 ISBN-13(EAN): 9781569906668 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 2131.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: You need reliable initial processing data before setting up an injection molding machine to optimize and stabilize the process if you want to guarantee excellent results. A good set up can save you time and money. This powerful tool will provide you with the most important processing data, such as viscosity, thermal properties, mold temperatures, and suggested heater temperatures for the most commonly used materials in injection molding.Pocket-sized and condensed - yet clear and comprehensive!The PLASTICS POCKET POWER Series was developed with the plastics processor in mind. Its small, 3""X5"" size makes it a convenient resource tool for people to carry with them. These books are practical reference tools that contain all of the pertinent data plastics processors need to overcome the day-to-day challenges they encounter. The unique spiral binding of these books lets the user easily flip through the pages, mark their most-often used pages by keeping them flipped open, and allows the book to lay flat.
Автор: Samuel Kenig Название: Processing of Polymer Nanocomposites ISBN: 1569906351 ISBN-13(EAN): 9781569906354 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 27720.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Covers the fundamental unit operations involved in processing of thermoplastic and thermoset nanocomposites. The processing methods include extrusion, injection molding, blow molding, and thermoforming. Also covered are nanoparticle dispersion, distribution, and compatibilization, and applications of polymer nanocomposites.
Автор: K. Wissbrun Название: Melt Rheology and Its Role in Plastics Processing ISBN: 1461597404 ISBN-13(EAN): 9781461597407 Издательство: Springer Рейтинг: Цена: 18167.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The audience also includes post-graduate students in polymer science and engineering who wish to acquire a more extensive background in rheology and perhaps become specialists in this area.
Автор: D.V. Rosato Название: Plastics Processing Data Handbook ISBN: 0412801906 ISBN-13(EAN): 9780412801907 Издательство: Springer Рейтинг: Цена: 36570.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Offers a review of high performance plastics and manufacturing processes. This book focuses on processing problems and solutions. It surveys fundamental processing concepts for fabrication techniques in use and provides data on controls, instrumentation, materials and molding technologies.
Автор: Selke Susan E. M., Culter John D., Auras Rafael Название: Plastics Packaging, 4e: Properties, Processing, Applications, and Regulations ISBN: 1569908222 ISBN-13(EAN): 9781569908228 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 25079.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Plastic materials continue to play a vital and growing role in packaging applications. It is thus more important than ever that all involved in the packaging industry command a basic understanding of the properties of the common packaging plastics. This highly regarded book provides just that to students and packaging professionals alike: material properties and how they relate to the chemical structure of the polymers, common processing methods for packaging applications, help with writing specifications, designing, fabricating, testing, and controlling the quality of the plastic material are covered comprehensively. The fourth edition has major revisions in discussions of sustainability, recycling, and design for sustainability. Coverage of biodegradable and biobased plastics is also increased. Discussion of coatings is also expanded. Further updates and enhancements throughout ensure Plastics Packaging remains an indispensable resource for both the packaging expert and the novice.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
