Innovations in Additive Manufacturing, Khan M. Adam, Jappes J. T. Winowlin
Автор: Seeram Ramakrishna, Sunpreet Singh, Chander Prakas Название: Additive Manufacturing: Foundation Knowledge For The Beginners ISBN: 9811224811 ISBN-13(EAN): 9789811224812 Издательство: World Scientific Publishing Рейтинг: Цена: 12672.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: "This book provides the key fundamental principles, classifications, recent developments, as well as different applications of additive manufacturing technologies"--
Автор: Kirihara Soshu, Nakata Kazuhiro Название: Multi-Dimensional Additive Manufacturing ISBN: 9811579091 ISBN-13(EAN): 9789811579097 Издательство: Springer Цена: 22359.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: In this book, basic sciences and applied technologies in 3D printing and 2D coating-including 2D surface modulations on 3D printed objects-are described to explore and to image novel multidimensional additive manufacturing.
Автор: Torres Marques Antуnio, Esteves Sнlvia, Pereira Joгo P. T. Название: Additive Manufacturing Hybrid Processes for Composites Systems ISBN: 3030445240 ISBN-13(EAN): 9783030445249 Издательство: Springer Цена: 23757.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: * Software ecosystems for hAM design, pre-processing, process planning, emulating and multi-axis processing; * 3D path generators for hAM based on a multi-objective optimisation algorithm that matches the recent curved adaptive slicing method with a new transversal scheme;
Автор: Gibson, Ian Rosen, David Stucker, Brent Khorasani, Mahyar Название: Additive manufacturing technologies ISBN: 3030561267 ISBN-13(EAN): 9783030561260 Издательство: Springer Рейтинг: Цена: 9083.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Chapter 1. Introduction and Basic Principles.- Chapter 2. Development of Additive Manufacturing Technology.- Chapter 3. Generalized Additive Manufacturing Process Chain.- Chapter 4. Vat Photopolymerization.- Chapter 5. Powder Bed Fusion.- Chapter 6. Material Extrusion.- Chapter 7. Material Jetting.- Chapter 8. Binder Jetting.- Chapter 9. Sheet Lamination.- Chapter 10. Directed Energy Deposition.- Chapter 11. Direct Write Technologies.- Chapter 12. Hybrid Additive Manufacturing.- Chapter 13. The Impact of Low-Cost AM Systems.- Chapter 14. Material for Additive Manufacturing.- Chapter 15. Guidelines for Process Selection.- Chapter 16. Post-processing.- Chapter 17. Software for Additive Manufacturing.- Chapter 18. Direct Digital Manufacturing.- Chapter 19. Design for Additive Manufacturing.- Chapter 20. Rapid Tooling.- Chapter 21. Industrial Drivers for AM Adoption.- Chapter 22. Business and Social Implications of AM.
Автор: Ramakrishna, Seeram (nus, S`pore) Singh, Sunpreet (nus, S`pore) Prakash, Chander (lovely Professional Univ, India) Название: Additive manufacturing: foundation knowledge for the beginners ISBN: 9811226245 ISBN-13(EAN): 9789811226243 Издательство: World Scientific Publishing Рейтинг: Цена: 7128.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book provides the key fundamental principles, classifications, recent developments, as well as different applications of additive manufacturing technologies. A comprehensive overview of the different classes is given, covering polymer-based, metal-based and ceramic-based systems. Special topics such as bioprinting and 4D printing are also introduced. The authors discuss the technological aspects of additive manufacturing in a very clear and understandable way, delivered with the help of self-illustrating artworks. This book is particularly designed to suit the curriculum requirements of undergraduate and graduate students enrolled in Mechanical Engineering, Material Science, Product Design and Development, Biomedical Engineering, Automobile and Aerospace Engineering, and other closely related domains. Manufacturing professionals working in similar fields may also wish to read it as a refresher and to catch up on recent advances.
Описание: These proceedings exchange ideas and knowledge among engineers, designers and managers on how to support real-world value chains by developing additive manufactured series products. The papers from the conference show a holistic, multidisciplinary view.
Автор: Junlan Wang; Bonnie Antoun; Eric Brown; Weinong Ch Название: Mechanics of Additive and Advanced Manufacturing, Volume 9 ISBN: 331987408X ISBN-13(EAN): 9783319874081 Издательство: Springer Рейтинг: Цена: 20962.00 р. Наличие на складе: Поставка под заказ.
Описание: Mechanics of Additive and Advanced Manufacturing, Volume 9 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies, including: Design, Optimization Experiments Computations Materials for Advanced Manufacturing Processes (3D printing, micro- and nano-manufacturing, powder bed fusion, directed energy deposition, etc.) Mechanics Aspects of Advanced Manufacturing (e.g. mechanical properties, residual stress, deformation, failure, rate-dependent mechanical behavior, etc.)
Автор: Bandar AlMangour Название: Additive Manufacturing of Emerging Materials ISBN: 3030062821 ISBN-13(EAN): 9783030062828 Издательство: Springer Рейтинг: Цена: 22359.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book provides a solid background for understanding the immediate past, the ongoing present, and the emerging trends of additive manufacturing, with an emphasis on innovations and advances in its use for a wide spectrum of manufacturing applications. It contains contributions from leading authors in the field, who view the research and development progress of additive manufacturing techniques from the unique angle of developing high-performance composites and other complex material parts. It is a valuable reference book for scientists, engineers, and entrepreneurs who are seeking technologically novel and economically viable innovations for high-performance materials and critical applications. It can also benefit graduate students and post-graduate fellows majoring in mechanical, manufacturing, and material sciences, as well as biomedical engineering.
Описание: This book systematically describes the status quo and future development of cold spray additive manufacturing technology.
Автор: Massimo Di Nicolantonio; Emilio Rossi; Thomas Alex Название: Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping ISBN: 3030202151 ISBN-13(EAN): 9783030202156 Издательство: Springer Рейтинг: Цена: 27950.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book discusses the latest advances in digital modeling systems (DMSs) and additive manufacturing (AM) technologies. It covers applications of networked technologies, ubiquitous computing, new materials and hybrid production systems, discussing how they are changing the processes of conception, modeling and production of products and systems of product. The book emphasizes ergonomic and sustainability issues, as well as timely topics such as DMSs and AM in Industry 4.0, DMSs and AM in developing countries, DMSs and AM in extreme environments, thus highlighting future trends and promising scenarios for further developing those technologies. Based on the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, held on July 24-28, 2019, in Washington D.C., USA, the book is intended as source of inspiration for researchers, engineers and stakeholders, and to foster interdisciplinary and international collaborations between them.
Автор: Subramanian Senthilkannan Muthu; Monica Mahesh Sav Название: Handbook of Sustainability in Additive Manufacturing ISBN: 9811005478 ISBN-13(EAN): 9789811005473 Издательство: Springer Рейтинг: Цена: 13060.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Introduction.- Invasion of Sustainability in Additive Manufacturing.- Sustainability in Additive Manufacturing.- Sustainable product design in Additive Manufacturing.- Sustainability characteristics for Additive Manufacturing.- Sustainable enhancement of Additive Manufacturing.- Can Additive Manufacturing be a medium for sustainable future?.
Автор: Sharlotte Kramer; Jennifer L. Jordan; Helena Jin; Название: Mechanics of Additive and Advanced Manufacturing, Volume 8 ISBN: 3030069729 ISBN-13(EAN): 9783030069728 Издательство: Springer Рейтинг: Цена: 27950.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Mechanics of Additive and Advanced Manufacturing, Volume 8 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the eighth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies, including:Fatigue & Fracture in AM MaterialsAdditively Manufactured Metals & StructuresAM Process CharacterizationProcessing & Mechanical Behavior of AM MaterialsDynamic Response of AM MaterialsAdditively Manufactured Polymers & Composites
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
