Microcontroller programming is not a trivial task. Indeed, it is necessary to set correctly the required peripherals by using programming languages like C/C++ or directly machine code. Nevertheless, MathWorks(R) developed a model-based workflow linked with an automatic code generation tool able to translate Simulink(R) schemes into executable files. This represents a rapid prototyping procedure, and it can be applied to many microcontroller boards available on the market. Among them, this introductory book focuses on the C2000 LaunchPadTM family from Texas InstrumentsTM to provide the reader basic programming strategies, implementation guidelines and hardware considerations for some power electronics-based control applications. Starting from simple examples such as turning on/off on-board LEDs, Analog-to-Digital conversion, waveform generation, or how a Pulse-Width-Modulation peripheral should be managed, the reader is guided through the settings of the specific MCU-related Simulink(R) blocks enabled for code translation. Then, the book proposes several control problems in terms of power management of RL and RLC loads (e.g., involving DC-DC converters) and closed-loop control of DC motors. The control schemes are investigated as well as the working principles of power converter topologies needed to drive the systems under investigation. Finally, a couple of exercises are proposed to check the reader's understanding while presenting a processor-in-the loop (PIL) technique to either emulate the dynamics of complex systems or testing computational performance.
Thus, this book is oriented to graduate students of electrical and automation and control engineering pursuing a curriculum in power electronics and drives, as well as to engineers and researchers who want to deepen their knowledge and acquire new competences in the design and implementations of control schemes aimed to the aforementioned application fields. Indeed, it is assumed that the reader is well acquainted with fundamentals of electrical machines and power electronics, as well as with continuous-time modeling strategies and linear control techniques. In addition, familiarity with sampled-data, discrete-time system analysis and embedded design topics is a plus.
However, even if these competences are helpful, they are not essential, since this book provides some basic knowledge even to whom is approaching these topics for the first time. Key concepts are developed from scratch, including a brief review of control theory and modeling strategies for power electronic-based systems.
Автор: Uzam, Murat Название: PIC16F1847 Microcontroller-Based Programmable Logic Controller ISBN: 0367506394 ISBN-13(EAN): 9780367506391 Издательство: Taylor&Francis Рейтинг: Цена: 17609.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: With a focus on how to design and implement a PLC, this volume explains hardware and associated basic concepts of PLC, using PIC16F1847 microcontroller with: 8192 words of Flash program memory, 1024 bytes of SRAM data memory, 256 bytes of EEPROM data memory supposrted by flowcharts for better understanding of macros.
Автор: Uzam, Murat Название: PIC16F1847 Microcontroller-Based Programmable Logic Controller ISBN: 0367506483 ISBN-13(EAN): 9780367506483 Издательство: Taylor&Francis Рейтинг: Цена: 17609.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Current volume presents advanced concepts of the PIC16F1847-Based PLC project and consists of topics like program control, high speed counter and PWM macros. It further explains memory related drum sequencer instruction, sequential functional charts, and analog input and output modules.
Автор: Uzam, Murat Название: PIC16F1847 Microcontroller-Based Programmable Logic Controller ISBN: 0367506432 ISBN-13(EAN): 9780367506438 Издательство: Taylor&Francis Рейтинг: Цена: 17609.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The volume focusses on intermediate concepts of the PIC16F1847-Based PLC project, and covers arithmetical, shift and rotate, selection, demultiplexer (DMUX), decoder, priority encoder and conversion macros, illustrated using flowcharts.
Описание: Offering a selection of the very best YA literature as chosen by the members of YALSA-BK, each book entry is fully annotated and generously cross-referenced, creating a rich resource that offers a wealth of ideas for any school or public librarian.Offers ideas for those school or public librarians who work with collection development, readers` advisory, reference or programming for young adults.
Описание: This book reviews and examines how power system low-frequency power oscillations and sub-synchronous oscillations may be affected by grid connection of wind power generation.
Описание: The book introduces the fundamentals of fluid-mechanics, momentum theories, vortex theories and vortex methods necessary for the study of rotors aerodynamics and wind-turbines aerodynamics in particular. Many analytical flows are derived in details: vortex rings, vortex cylinders, Hill`s vortex, vortex blobs etc.
This textbook provides practicing scientists and engineers a primer on the Microchip AVR(R) microcontroller.
The revised title of this book reflects the 2016 Microchip Technology acquisition of Atmel Corporation. In this third edition we highlight the popular ATmega164 microcontroller and other pin-for-pin controllers in the family with a complement of flash memory up to 128 KB. The third edition also provides an update on Atmel Studio, programming with a USB pod, the gcc compiler, the ImageCraft JumpStart C for AVR compiler, the Two-Wire Interface (TWI), and multiple examples at both the subsystem and system level. Our approach is to provide readers with the fundamental skills to quickly set up and operate with this internationally popular microcontroller. We cover the main subsystems aboard the ATmega164, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying hardware and software to operate the subsystem. In all examples, we use the C programming language. We include a detailed chapter describing how to interface the microcontroller to a wide variety of input and output devices and conclude with several system level examples including a special effects light-emitting diode cube, autonomous robots, a multi-function weather station, and a motor speed control system.
Описание: This textbook provides practicing scientists and engineers a primer on the Microchip AVR® microcontroller. The revised title of this book reflects the 2016 Microchip Technology acquisition of Atmel Corporation. In this third edition we highlight the popular ATmega164 microcontroller and other pin-for-pin controllers in the family with a complement of flash memory up to 128 KB. The third edition also provides an update on Atmel Studio, programming with a USB pod, the gcc compiler, the ImageCraft JumpStart C for AVR compiler, the Two-Wire Interface (TWI), and multiple examples at both the subsystem and system level. Our approach is to provide readers with the fundamental skills to quickly set up and operate with this internationally popular microcontroller. We cover the main subsystems aboard the ATmega164, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying hardware and software to operate the subsystem. In all examples, we use the C programming language. We include a detailed chapter describing how to interface the microcontroller to a wide variety of input and output devices and conclude with several system level examples including a special effects light-emitting diode cube, autonomous robots, a multi-function weather station, and a motor speed control system.
Описание: This book reviews and examines how power system low-frequency power oscillations and sub-synchronous oscillations may be affected by grid connection of wind power generation.
The book summarizes the current state of the solid oxide fuel cell (SOFC) technology in power generation applications. It describes the single cells, SOFC stacks, micro-combined heat and power systems, large-scale stationary power generators and polygeneration units. The principles of modeling, simulation and controls of power systems with solid oxide fuel cells are presented and discussed. Authors provide theoretical background of the technology followed by the essential insights into the integrated power systems. Selected aspects of the design, construction and operation of power units in range from single kilowatts to hundreds of kilowatts are presented. Finally, the book reports the selected studies on prototype systems which have been constructed in Europe.The book discusses the theoretical and practical aspects of operation of power generators with solid oxide fuel cells including fabrication of cells, design of stacks, system modeling, simulation of stationary and non-stationary operation of systems, fuel preparation and controls.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
