Sustainable polymers for additive manufacturing /, Paesano, Antonio,
Автор: Antoni Niepokolczycki; Jerzy Komorowski Название: ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing ISBN: 3030215024 ISBN-13(EAN): 9783030215026 Издательство: Springer Рейтинг: Цена: 41925.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book gathers papers presented at the 36th conference and 30th Symposium of the International Committee on Aeronautical Fatigue and Structural integrity. Focusing on the main theme of “Structural Integrity in the Age of Additive Manufacturing”, the chapters cover different aspects concerning research, developments and challenges in this field, offering a timely reference guide to designers, regulators, manufacturer, and both researchers and professionals of the broad aerospace community.
Автор: Kirihara Soshu, Nakata Kazuhiro Название: Multi-Dimensional Additive Manufacturing ISBN: 9811579091 ISBN-13(EAN): 9789811579097 Издательство: Springer Цена: 22359.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: In this book, basic sciences and applied technologies in 3D printing and 2D coating-including 2D surface modulations on 3D printed objects-are described to explore and to image novel multidimensional additive manufacturing.
Автор: Seeram Ramakrishna, Sunpreet Singh, Chander Prakas Название: Additive Manufacturing: Foundation Knowledge For The Beginners ISBN: 9811224811 ISBN-13(EAN): 9789811224812 Издательство: World Scientific Publishing Рейтинг: Цена: 12672.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: "This book provides the key fundamental principles, classifications, recent developments, as well as different applications of additive manufacturing technologies"--
Описание: The use of additive manufacturing for the direct production of finished products is becoming increasingly important. The method not only reduces the demands on industrial infrastructure, but also opens up new perspectives in terms of decentralized production and customer inclusive individualized production (customization, cyberproduction).Oriented towards the practitioner, in this book the basics of additive manufacturing are presented and the properties and special aspects of industrially available machines are discussed. From the generation of data to the forming method, the complete process chain is shown in a practical light. In particular, the following additive manufacturing technologies are discussed:Polymerization (e.g., stereolithography)Sintering and melting (e.g., laser sintering)Layer laminate method (e.g., laminated object manufacturing, LOM)Extrusion (e.g., fused deposition modeling, FDM)3D printingApplications for the production of models and prototypes (rapid prototyping), tools, tool inserts, and forms (rapid tooling) as well as end products (rapid manufacturing) are covered in detailed chapters with examples. Questions of efficiency are discussed from a strategic point of view, and also from an operational perspective.With the purchase of this book, you also receive a free personal access code to download the eBook.
Автор: Celik Emrah Название: Additive Manufacturing: Science and Technology ISBN: 1501518771 ISBN-13(EAN): 9781501518775 Издательство: Walter de Gruyter Цена: 13008.00 р. Наличие на складе: Нет в наличии.
Описание:
This book covers additive manufacturing of polymers, metals, ceramics, fiber reinforced polymer composites, energy harvesting materials, and biomaterials. Hybrid manufacturing is discussed. Topology optimization methodology is described and finite element software examples are provided. The book is ideal for graduate students and career starters in the industry.
Автор: Gibson Ian, Rosen David, Stucker Brent Название: Additive Manufacturing Technologies ISBN: 3030561291 ISBN-13(EAN): 9783030561291 Издательство: Springer Рейтинг: Цена: 9083.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Chapter 1. Introduction and Basic Principles.- Chapter 2. Development of Additive Manufacturing Technology.- Chapter 3. Generalized Additive Manufacturing Process Chain.- Chapter 4. Vat Photopolymerization.- Chapter 5. Powder Bed Fusion.- Chapter 6. Material Extrusion.- Chapter 7. Material Jetting.- Chapter 8. Binder Jetting.- Chapter 9. Sheet Lamination.- Chapter 10. Directed Energy Deposition.- Chapter 11. Direct Write Technologies.- Chapter 12. Hybrid Additive Manufacturing.- Chapter 13. The Impact of Low-Cost AM Systems.- Chapter 14. Material for Additive Manufacturing.- Chapter 15. Guidelines for Process Selection.- Chapter 16. Post-processing.- Chapter 17. Software for Additive Manufacturing.- Chapter 18. Direct Digital Manufacturing.- Chapter 19. Design for Additive Manufacturing.- Chapter 20. Rapid Tooling.- Chapter 21. Industrial Drivers for AM Adoption.- Chapter 22. Business and Social Implications of AM.
Автор: Pathak Sunil, Saha Gobinda C. Название: Cold Spray in the Realm of Additive Manufacturing ISBN: 3030427552 ISBN-13(EAN): 9783030427559 Издательство: Springer Рейтинг: Цена: 19564.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book sheds light on the development of the cold spray process in applications of additive manufacturing (AM) and repair/remanufacturing engineering. It covers the process fundamentals of different cold spray techniques, namely low pressure cold spray and high pressure cold spray process.
Название: Additive manufacturing ISBN: 1498714773 ISBN-13(EAN): 9781498714778 Издательство: Taylor&Francis Рейтинг: Цена: 29858.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Get Ready for the Future of Additive Manufacturing
Additive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)--the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This process enables users to quickly build three-dimensional objects from the bottom-up, adding material one cross-sectional layer at a time directly from a computer model. This book provides a clear overview of specific technologies related to AM. It covers existing and emerging techniques in AM in use for a wide spectrum of manufacturing applications, and highlights the advantages of each technique with specific references to technological applications.
Introduces Valuable Processes for Making Prototype Parts among Manufacturers of Many Types
The book outlines many of the processes developed using various materials ranging from metals to plastics, and composites to human tissue. It presents recent innovations and potential viable applications that include: near-net shape capabilities, superior design, geometric flexibility, innovations in fabrication using multiple materials, and reduced tooling and fixturing. It also introduces several illustrations and case studies that focus on the present and far-reaching applications, developments, and future prospects of AM technologies.
Written by renowned experts in their fields, this book:
Covers the reactive inkjet printing of nylon materials relevant to AM
Discusses the AM of metals using the techniques of free space deposition and selective laser melting
Provides a comparison between AM materials and human tissues
Addresses the use of AM for medical devices and drug and cell delivery
Focuses on the relevance of AM to rare earth magnets and more
Additive Manufacturing: Innovations, Advances, and Applications emphasizes the use of AM commensurate with advances in technical applications, and provides a solid background on the fundamentals and principles of this rapidly developing field.
Автор: Pathak Sunil, Saha Gobinda C. Название: Cold Spray in the Realm of Additive Manufacturing ISBN: 3030427587 ISBN-13(EAN): 9783030427580 Издательство: Springer Цена: 23757.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book sheds light on the development of the cold spray process in applications of additive manufacturing (AM) and repair/remanufacturing engineering. It covers the process fundamentals of different cold spray techniques, namely low pressure cold spray and high pressure cold spray process.
This volume contains a collection of 22 papers submitted from the below seven symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada:
Additive Manufacturing Technologies
Advanced Materials, Technologies, and Devices for Electro-optical and Biomedical Applications
Multifunctional Coatings for Energy and Environmental Applications
Novel, Green, and Strategic Processing and Manufacturing Technologies
Powder Processing Technology for Advanced Ceramics
Computational Design and Modeling
Materials for Extreme Environments: Ultra-high Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)
Автор: J. Paulo Davim Название: Additive and Subtractive Manufacturing: Emergent Technologies ISBN: 311054816X ISBN-13(EAN): 9783110548167 Издательство: Walter de Gruyter Цена: 24909.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Additive manufacturing (AM) and subtractive manufacturing (SM) offer numerous advantages in the production of single and multiple components. They provide incomparable design independence and are used to fabricate products in several industries, e.g.: aeronautic, automotive, biomedical, etc. The book presents recent results of processes including 3D printing, SLS (selective laser sintering), EBM (electron beam melting) and Precise Cutting and Drilling.
Автор: Torres Marques Antуnio, Esteves Sнlvia, Pereira Joгo P. T. Название: Additive Manufacturing Hybrid Processes for Composites Systems ISBN: 3030445216 ISBN-13(EAN): 9783030445218 Издательство: Springer Рейтинг: Цена: 23757.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: * Software ecosystems for hAM design, pre-processing, process planning, emulating and multi-axis processing; * 3D path generators for hAM based on a multi-objective optimisation algorithm that matches the recent curved adaptive slicing method with a new transversal scheme;
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
