Описание: This book gathers the proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM), held on November 2021, a virtual conference organized in Melaka, Malaysia. It focuses on two relatively broad areas—advanced materials and sustainable energy—and a diverse range of subtopics: Advanced materials and related technologies: liquid crystals, semiconductors, superconductors, optics, lasers, sensors, mesoporous materials, nanomaterials, smart ferrous materials, amorphous materials, crystalline materials, biomaterials, metamaterials, composites, polymers, design, analysis, development, manufacturing, processing and testing for advanced materials. Sustainable energy and related technologies: energy management, storage, conservation, industrial energy efficiency, energy-efficient buildings, energy-efficient traffic systems, energy distribution, energy modeling, hybrid and integrated energy systems, fossil energy, nuclear energy, bioenergy, biogas, biomass geothermal power, non-fossil energies, wind energy, hydropower, solar photovoltaic, fuel cells, electrification, and electrical power systems and controls.
Описание: This book constitutes the refereed post-conference proceedings of the 3rd EAI International Conference on Sustainable Energy for Smart Cities, SESC 2021, held in November 2021. The conference was framed within the 7th Annual Smart City 360° Summit. Due to COVID-19 pandemic the conferences were held virtually. The 13 revised full papers were carefully reviewed and selected from 28 submissions. They present multidisciplinary scientific results toward answering the complex technological problems of emergent Smart Cities. The subjects related to sustainable energy, framed with the scope of smart cities and addressed along with the SESC 2021 conference, are crucial to guarantee an equilibrium among economic growth and environmental sustainability, as well as to contribute to reducing the impact of climate change.
Описание: This book presents the select proceedings of the international conference on Sustainable Practices and Innovations in Civil Engineering 2021 (SPICE 2021). The topics covered include the addition and replacement of cementitious materials in concrete, thereby enhancing the strength and durability characteristics of concrete, instrumentation and testing in structural engineering, ground improvement techniques, water management, waste management, and energy efficiency and sustainability in construction. It also includes few papers in the area of environmental civil engineering and discusses key issues in the field of water resources and the impact of COVID-19 on the construction industry. This book is a valuable reference to the students, researchers, and professionals in the field of civil engineering.
Описание: This book presents select peer-reviewed proceedings of the International Conference on Sustainable Development in Energy and Environment (ICSDEE) 2019.
Описание: This book presents select peer-reviewed proceedings of the International Conference on Sustainable Development in Energy and Environment (ICSDEE) 2019.
This book gathers the proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2019), held on 16-17 October 2019 in Surakarta, Indonesia. It focuses on two relatively broad areas - advanced materials and sustainable energy - and a diverse range of subtopics:
Advanced Materials and Related Technologies: Liquid Crystals, Semiconductors, Superconductors, Optics, Lasers, Sensors, Mesoporous Materials, Nanomaterials, Smart Ferrous Materials, Amorphous Materials, Crystalline Materials, Biomaterials, Metamaterials, Composites, Polymers, Design, Analysis, Development, Manufacturing, Processing and Testing for Advanced Materials.
Sustainable Energy and Related Technologies: Energy Management, Storage, Conservation, Industrial Energy Efficiency, Energy-Efficient Buildings, Energy-Efficient Traffic Systems, Energy Distribution, Energy Modeling, Hybrid and Integrated Energy Systems, Fossil Energy, Nuclear Energy, Bioenergy, Biogas, Biomass Geothermal Power, Non-Fossil Energies, Wind Energy, Hydropower, Solar Photovoltaic, Fuel Cells, Electrification, and Electrical Power Systems and Controls.
Описание: Micromechanical Analysis of Elastic Modulus and Tensile Strength on Randomized Discontinuous Alkali and Heat Treated Kenaf Fiber-Unsaturated Polyester Composites.- Tribological Properties of 3D-Printed ABS Under Paraffin Oil Lubrication.- Mechanical Performance of Ramie Fiber Composite Orientation towards Epoxy and Polypropylene Matrix.- Potential application of LiCl/H2O-CNTs Nanofluids for Liquid Desiccant Cooling System (LDCS): A Preliminary Numerical Study.- Strengthening Governance and Research and Community Service Capacity (P2M) UNS Faculty of Engineering Lecturers.- Identifying Geothermal Power Plant Institutional Barrier and External Factors in Indonesia.- Frictional Characteristic Evaluation of Composite Brake Block Using A Reduced-Scale Brake Dynamometer.
Описание: This book includes high-quality research papers presented at Symposium on Power Electronic and Renewable Energy Systems Control (PERESC 2020), which is held at the School of Electrical Sciences, IIT Bhubaneswar, Odisha, India, during 4-5 December 2020.
Описание: This book includes high-quality research papers presented at Symposium on Power Electronic and Renewable Energy Systems Control (PERESC 2020), which is held at the School of Electrical Sciences, IIT Bhubaneswar, Odisha, India, during 4-5 December 2020.
Описание: This book presents selected, peer-reviewed proceedings of the International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development 2021 (AMAS2021), held in the city of Ha Long, Vietnam, from November 4 to 7, 2021. AMAS2021 is a special meeting of the International Conference on Material, Machines and Methods for Sustainable Development (MMMS), with a strong focus on automation and fostering an overall approach to assist policy makers, industries, and researchers at various levels to position local technological development toward sustainable development. The contributions published in this book stem from a wide spectrum of research, ranging from micro- and nanomaterial design and processing, to special applications in mechanical technology, environmental protection, green development, and climate change mitigation. A large group of contributions selected for these proceedings also focus on modeling and manufacturing of ecomaterials.
Описание: Deep CNN Depth Decision in Intra Prediction.- Investigation of Electrical Characteristics for Different Geometrical Dimensions of 11 kv Insulators under Finite Element Method (fem).- Non- Isolated Multilevel Zeta Converter for mli Application.- Corrupted Image Enhancement Through Wavenet: A Hybrid Approach.- Modelling and Control of Cascaded Multilevel Inverter for Harmonics Mitigation of Induction Motor Drive.- Assessment of Various Vector Control Schemes for PMSM Drive Application.- Design and Implementation of Discrete Controller Based Zeta Converter for Solar Power Applications.- Structural Optimization of LMS Adaptive Filter using Multi-Stage Cascaded Configuration.- THD Optimization with Low Switching Frequency Control For 15-Level Reduced Switch Asymmetric Multilevel Inverter.- Signal Conditioning Circuits for GMR Sensor in Biomedical Applications.
Описание: Multi-Choice Programming with Benefits using Kriging Interpolation Method.- Prediction of Alzheimer's Disease using Machine Learning Algorithm.- A Study of the Caputo-Fabrizio Fractional Model for Atherosclerosis Disease.- Fourth order computations of forced convection heat transfer past an isothermal/isoflux cylinder in cylindrical geometry with pseudo time iteration technique.- Implementation of Arithmetic Logic Unit using Area Efficient Adder.- Optimized design of ALU using Reversible Gates.- On-street parking management in Urban CBD: A Review.- Optimal Location of IPFC on LFC Studies Considering PI-TIDN controller and RT-Lab.- Redox Flow Battery Support for Combined ALFC-AVR Control of Multiarea Thermal system Incorporating Renewable Energy Sources.- Cascaded Neural Network Approach for Template Based Array Synthesis.- Deep Learning Assisted Technology for MIMO OFDM 5G Application.- Multi objective Hydro-Thermal-Wind Scheduling applying PSO.- Design and Implementation of Recommendation System using Sentiment Analysis in Social Media.- Content Based Movie Recommendation System with Sentiment Evaluation of Viewer's Reviews.- New characterization of electrode of supercapacitor with its application as a backup power supply.- Classification of Indian classical dance hand gestures: A Dense SIFT based approach.- A Grid Connecting Control Scheme for Reactive Power Compensation of PV Inverter.- Quantification of Urinary bladder for early detection of hazard in Oliguric patient under dialysis using Embedded System.- Shorted Non-radiating Edges Integrated 2x1 Rectangular Microstrip Antenna for Concurrent Improvement of Gain and Polarization Purity.- A mutual authentication and key agreement protocol for smart grid environment using lattice.- Identification of Malignant Lymphoblast Cell in Bone Marrow using Machine Learning.- Predicting Tamil Nadu Election 2021 Results using Sentimental Analysis Before Counting.- Ticket Dispensation Using Face Detection and Classification.- Estimating the Effectiveness of Paratransit Service in Guwahati City.- A state-of-the-art review on multi-criteria decision making approaches for micro-grid planning.- Availability of different agricultural biomass for energy applications in Villupuram and Cuddalore district.- Deep Wavelet based Compressive Sensing Data Reconstruction for Wireless Visual Sensor Networks.- Optimized 64-bit reversible BCD Adder for low power applications and its comparative study.- Disease Prediction using Various Data Mining Techniques.- Classification Of Medicinal Plant Species Using Neural Network Classifier: A Comparative Study.- Stock Market Prediction of Neural network: A Literature Review.- Expanding Electricity Access in Rural Uttarakhand by Mobilization of Local Resources.- Detection of Abnormalities in Mammograms using Deep Convolutional Neural Networks.- Orange Fruit Recognition using Neural Networks.- Machine learning based method for recognition of paddy leaf diseases.- Data-Path Designing in Multi-Voltage Domain.- State Space Approach of Automatic Generation Control of Two-Area Multi Source Power systems.- A neural network model to estimate parameters of DBSCAN for flood image segmentation.- Quality Assessment of Public Transport: A Review.- Blockchain Technology Used in the Mid-Day Meal Scheme Program Supply Chain Management.- Economic Load Dispatch: A Holistic Review on Modern Bio-Inspired Optimization Techniques.- Enhanced Multigradient Dilution Preparation.- Breakdown Voltage Improvement in AlGaN/GaN HEMT by Introducing a Field Plate.- Engineering optimization using an advanced hybrid algorithm.- Image Enhancement using Chicken Swarm Optimization.- AHP-utility Approach for Mode Choice Analysis of Online Delivery System.- Medical Electronics Device to Provide Non-Invasive Therapy to Treat Deep Vein Thrombosis using BLE and Embedded Systems.- Applying Efforts for Behavior Based Authentication for Mobile Cloud Security.- A Comprehensive Study on SCADA
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
