Reinforcement of Timber Elements in Existing Structures: State-of-the-Art Report of the RILEM TC 245-RTE, Branco Jorge, Dietsch Philipp, Tannert Thomas
Описание: Introduction.- Self-tapping screws as reinforcement for structural timber elements.- Glued-in rods as reinforcement for timber structural elements.- Fiber-reinforced polymers as reinforcement for timber structural elements.- Nanocomposites as reinforcement for timber structural elements.- Reinforcement of Timber Structures: Standardization towards a new section for EC 5.- Seismic Reinforcement of Traditional Timber Structures. Reinforcement of Traditional Timber Frame Walls.- Reinforcement of Light-Frame Wood Structures.- Reinforcement of Historic Timber Roofs.- Retrofitting of traditional timber floors.- Reinforcement of Traditional Carpentry Joints.
Описание: This book gathers peer-reviewed contributions presented at the 3rd RILEM Spring Convention and Conference, held at Guimar?es and hosted by the University of Minho, Portugal, on March 9-14, 2020. The theme of the Conference was “Ambitioning a Sustainable Future for Built Environment: comprehensive strategies for unprecedented challenges”, which was aimed at discussing current challenges and impacts of the built environment on sustainability. The present volume is dedicated to the topic “Service life extension of existing structures”, which covers the most recent scientific and technological developments in the understanding of the evolution and degradation of construction materials and structural systems. Analytical and numerical, as well as experimental approaches, aimed at characterizing, modelling and predicting the evolution of the physical, chemical and mechanical properties of construction materials and structural systems are regarded. Multiphysics models are also considered, as well as other strategies that contribute for an accurate characterization and prediction the service life and the evolution of existing and novel construction materials under normal or extreme environmental exposure or loading conditions. New strategies to promote the smart repairing or the recovery of material properties, as well as the service life extension, are also considered. The following subtopics are included: service life models and multiphysics approaches; smart structures, innovative monitoring and intervention strategies; management and optimized maintenance strategies; integrated rehabilitation and strengthening approaches.
Автор: Taerwe, L. Название: Non-Metallic (FRP) Reinforcement for Concrete Structures ISBN: 0367449013 ISBN-13(EAN): 9780367449018 Издательство: Taylor&Francis Рейтинг: Цена: 10104.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Dealing with a wide range of non-metallic materials, this book opens up possibilities of lighter, more durable structures. It contains contributions from leading international researchers and design engineers.
Описание: The book is intended for practitioners responsible for concrete structures affected by the damaging alkali aggregate reaction, engineers dealing with aging structures, and researchers in the field.
Описание: The book is intended for practitioners responsible for concrete structures affected by the damaging alkali aggregate reaction, engineers dealing with aging structures, and researchers in the field.
Описание: This book presents the work done by the RILEM Technical Committee 274-TCE. It focuses on the estimation of the parameters which are necessary to properly design earthen constructions. It provides a compilation of the value classically obtained for the key parameters of earthen materials, a pedagogical presentation of the main testing procedures for earthen materials, their advantage and their drawback and an overview of most standards on earthen materials, whatever their origin and their language. The book is divided into eight chapters. After a general introduction on earthen materials and constructions, the state of the art on the material characterisation technics, the assessment of hygrothermal performance, the mechanical behaviour, seismic resistance and the durability will be presented, each in a dedicated chapter. On the basis of these last chapters, a critical review of the standards which are used for earthen material will be presented in the last chapter. The last chapter is dedicated to the analysis of the environmental potential of earth-based building materials.
Автор: An?bal Costa; Ant?nio Ar?de; Humberto Varum Название: Strengthening and Retrofitting of Existing Structures ISBN: 9811355088 ISBN-13(EAN): 9789811355080 Издательство: Springer Рейтинг: Цена: 20962.00 р. Наличие на складе: Поставка под заказ.
Описание:
This book presents the fundamentals of strengthening and retrofitting approaches, solutions and technologies for existing structures. It addresses in detail specific techniques for the strengthening of traditional constructions, reinforced concrete buildings, bridges and their foundations. Finally, it discusses issues related to standards and economic decision support tools for retrofitting.
Автор: An?bal Costa; Ant?nio Ar?de; Humberto Varum Название: Strengthening and Retrofitting of Existing Structures ISBN: 9811058571 ISBN-13(EAN): 9789811058578 Издательство: Springer Рейтинг: Цена: 20962.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book presents the fundamentals of strengthening and retrofitting approaches, solutions and technologies for existing structures. Finally, it discusses issues related to standards and economic decision support tools for retrofitting.
Описание: This book presents the work of the RILEM Technical Committee 276-DFC: Digital fabrication with cement-based materials. The most important outcomes of the technical committee are presented. First, a unified process classification for digital fabrication with concrete is proposed, discussed and illustrated. Then, a state of the art of the testing methods (both at a material and structural level and in the fresh and hardened state) is provided. The gathered knowledge is expected to form the foundation of some quality control procedures for fresh properties along with hardened properties and service life performance. The book will benefit academics, practitioners, industry and standardization committees interested in digital fabrication with cement-based materials.
Описание: The work of the RILEM Technical Committee (TC -236 BBM) was dedicated to the study of construction materials made from plant particles. It considered the question whether building materials containing as main raw material recyclable and easily available plant particles are renewable.
Описание: The present volume is dedicated to the topic "New materials and structures for ultra-durability", which covers current scientific and technological developments aimed at improving knowledge about degradation mechanisms in construction materials, as well as to the development of new materials with extreme durability.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
