Описание: The operational theme permeating most definitions of the IoT concept, is the wireless communication of networked objects, in particular, smart sensing devices and machines, exchanging data a la Internet. In this book, a detailed look is taken at the fundamental principles of devices and techniques whose exploitation will facilitate the development of compact, power-efficient, autonomous, smart, networked sensing nodes underlying and encompassing the emerging IoT era.
The book provides an understanding of nanoelectromechanical quantum circuits and systems (NEMX), as exemplified by firstly the uncovering of their origins, impetus and motivation, and secondly by developing an understanding of their device physics, including, the topics of actuation, mechanical vibration and sensing. Next the fundamentals of key devices, namely, MEMS/NEMS switches, varactors and resonators are covered, including a wide range of implementations. The book then looks at their energy supply via energy harvesting, as derived from wireless energy and mechanical vibrations. Finally, after an introduction to the fundamentals of IoT networks and nodes, the book concludes with an exploration of how the NEMX components are encroaching in a variety of emerging IoT applications.
Описание: This book presents the proceedings of the 4th International Conference on Internet of Things and Connected Technologies (ICIoTCT), held on May 9-10, 2019, at Malaviya National Institute of Technology (MNIT), Jaipur, India.
Описание: This book presents the recent research adoption of a variety of enabling wireless communication technologies like RFID tags, BLE, ZigBee, etc., and embedded sensor and actuator nodes, and various protocols like CoAP, MQTT, DNS, etc., that has made Internet of things (IoT) to step out of its infancy to become smart things.
Описание: Enabling Technologies for the Internet of Things: Wireless Circuits, Systems and Networks collects slides and notes from the lectures given in the 2017 Seasonal School Enabling Technologies for the Internet-of-Things, supported by IEEE CAS Society and by INTEL funding, and organized by Prof. Sergio Saponara, and Prof. Giuliano Manara.The book discusses new trends in Internet-of-Things (IoT) technologies, considering technological and training aspects, with special focus on electronic and electromagnetic circuits and systems. IoT involves research and design activities both in analog and in digital circuit/signal domains, including focus on sensors interfacing and conditioning, energy harvesting, low-power signal processing, wireless connectivity and networking, functional safety (FuSa). FuSa is one of the emerging key issues in IoT applications in safety critical domain like industry 4.0, autonomous and connected vehicles and e-health. Our world is becoming more and more interconnected. Currently it is estimated that two hundred billion smart objects will be part of the IoT by 2020. This new scenario will pave the way to innovative business models and will bring new experiences in everyday life. The challenge is offering products, services and comprehensive solutions for the IoT, from technology to intelligent and connected objects and devices to connectivity and data centers, enhancing smart home, smart factory, autonomous driving cars and much more, while at the same time ensuring the highest safety standards. In safety-critical contexts, where a fault could jeopardize the human life, safety becomes a key aspect.
Автор: Qusay F Hassan Название: Internet of Things A to Z: Technologies and Applications ISBN: 1119456746 ISBN-13(EAN): 9781119456742 Издательство: Wiley Рейтинг: Цена: 19158.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
A comprehensive overview of the Internet of Things' core concepts, technologies, and applications
Internet of Things A to Z offers a holistic approach to the Internet of Things (IoT) model. The Internet of Things refers to uniquely identifiable objects and their virtual representations in an Internet-like structure. Recently, there has been a rapid growth in research on IoT communications and networks, that confirms the scalability and broad reach of the core concepts. With contributions from a panel of international experts, the text offers insight into the ideas, technologies, and applications of this subject.
The authors discuss recent developments in the field and the most current and emerging trends in IoT. In addition, the text is filled with examples of innovative applications and real-world case studies. Internet of Things A to Z fills the need for an up-to-date volume on the topic. This important book:
Covers in great detail the core concepts, enabling technologies, and implications of the Internet of Things
Addresses the business, social, and legal aspects of the Internet of Things
Explores the critical topic of security and privacy challenges for both individuals and organizations
Includes a discussion of advanced topics such as the need for standards and interoperability
Contains contributions from an international group of experts in academia, industry, and research
Written for ICT researchers, industry professionals, and lifetime IT learners as well as academics and students, Internet of Things A to Z provides a much-needed and comprehensive resource to this burgeoning field.
Описание: The book aims to provide a broad overview of various topics of the Internet of Things (IoT) from the research and development priorities to enabling technologies, architecture, security, privacy, interoperability and industrial applications. It is intended to be a standalone book in a series that covers the Internet of Things activities of the IERC ? Internet of Things European Research Cluster from technology to international cooperation and the global ""state of play"". The book builds on the ideas put forward by the European research Cluster on the Internet of Things Strategic Research Agenda and presents global views and state of the art results on the challenges facing the research, development and deployment of IoT at the global level.Today we see the integration of Industrial, Business and Consumer Internet which is bringing together the Internet of People, Internet of Things, Internet of Energy, Internet of Vehicles, Internet of Media, Services and Enterprises in forming the backbone of the digital economy, the digital society and the foundation for the future knowledge and innovation based economy in supporting solutions for the emerging challenges of public health, aging population, environmental protection and climate change, the conservation of energy and scarce materials, enhancements to safety and security and the continuation and growth of economic prosperity.Penetration of smartphones and advances in machine to machine and wireless communication technology will be the main drivers for IoT development. The IoT contribution is in the increased value of information created by the number of interconnections among things and the transformation of the processed information into knowledge shared into the Internet of Everything. The connected devices are part of ecosystems connecting people, processes, data, and things which are communicating in the cloud using the increased storage and computing power and pushing for standardization of communication and metadata. In this context the next generation of the Cloud technologies will need to be flexible enough to scale autonomously, adaptive enough to handle constantly changing connections and resilient enough to stand up to the huge flows in data that will occur. For 2025 analysts forecast that there will be six devices per human on the planet, which means 50 billion more connected devices over the next 12 years. The Internet of Things market is connected to this devices growth from industrial machine to machine (M2M) systems, smart meters and wireless sensors. Enabling technologies such as nanoelectronics, MEMS, embedded systems, intelligent device management, smart phones, telematics, smart network infrastructure, cloud computing and software technologies will create new products, new services, new interfaces by creating smart environments and smart spaces with applications ranging from Smart Cities, smart transport, buildings, energy, grid, to smart health and life. Technical topics discussed in the book include:IntroductionInternet of Things in a wider context: Time for convergence.Internet of Things Strategic Research AgendaInterconnection and Integration of the Physical World into the Digital WorldScalable Architectures for IoT ApplicationsIoT standardisation requirements and initiatives. Standardisation and Innovation.Service Openness and InteroperabilitySoftware define and virtualization of network resourcesMobile devices enable IoT evolution fro m industrial applications to mass consumer applicationsInnovation through Interoperability and Standardisation when everything is connected anytime at anyplaceSecurity, privacy, trust, safety, dependability: new challenges for IoTInternet of Things Industrial Applications.
Описание: Introduction.- Part I: Edge computing and Internet of things in smart development.- Emerging trends of IoT and edge analytics.- Technology, protocols and use cases of IoT, Cloud and Big data analytics.- Data analytics and machine learning in decision making for smart development.- Part II: Wireless Communication protocols in sustainable development.- Health care solutions and data analytics in hospital environment.- Role of AI and bio inspired computing in decision making.- Deep learning concepts aiding smart city applications.- Energy harvesting methodologies and experimentation of sensors and actuators.- Reliability analysis and fault tolerant architecture for IoT and Edge Computing.- Buffer management in delay tolerant and delay in tolerant monitoring.- Handling network failure during critical duration.- Trust models and digital signature concepts for resource starving embedded systems.- Part III: Role of robotics in smart development.- Automation solution for smart development applications.- Solutions for challenges faced in smart development through low cost automation.- Conclusion.
Автор: Kanagachidambaresan G. R., Maheswar R., Manikandan V. Название: Internet of Things in Smart Technologies for Sustainable Urban Development ISBN: 3030343278 ISBN-13(EAN): 9783030343279 Издательство: Springer Рейтинг: Цена: 25155.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Introduction.- Part I: Edge computing and Internet of things in smart development.- Emerging trends of IoT and edge analytics.- Technology, protocols and use cases of IoT, Cloud and Big data analytics.- Data analytics and machine learning in decision making for smart development.- Part II: Wireless Communication protocols in sustainable development.- Health care solutions and data analytics in hospital environment.- Role of AI and bio inspired computing in decision making.- Deep learning concepts aiding smart city applications.- Energy harvesting methodologies and experimentation of sensors and actuators.- Reliability analysis and fault tolerant architecture for IoT and Edge Computing.- Buffer management in delay tolerant and delay in tolerant monitoring.- Handling network failure during critical duration.- Trust models and digital signature concepts for resource starving embedded systems.- Part III: Role of robotics in smart development.- Automation solution for smart development applications.- Solutions for challenges faced in smart development through low cost automation.- Conclusion.
Описание: This book gathers selected papers presented at the 5th International Conference on Intelligent Data Communication Technologies and Internet of Things (ICICI 2021), organized by JCT College of Engineering and Technology, Coimbatore, Tamil Nadu, India during 27 – 28 August 2021. This book solicits the innovative research ideas and solutions for almost all the intelligent data intensive theories and application domains. The general scope of this book covers the design, architecture, modeling, software, infrastructure and applications of intelligent communication architectures and systems for big data or data-intensive applications. In particular, this book reports the novel and recent research works on big data, mobile and wireless networks, artificial intelligence, machine learning, social network mining, intelligent computing technologies, image analysis, robotics and autonomous systems, data security and privacy.
Active Closed-Loop Gap Control for Aerostatic Bearing.- Firefly Algorithm for Power Economic Emission Dispatch.- Application of the Taguchi Method to the War page for Light Guide Plate.- Diagnosis of Muscle Properties in Low-Back-Pain with Electrical Bio impedance Methodology.- Low Cost Wearable Control Valves with No Mechanical Sliding Parts in Valves.- Estimation of Residual Traveling Distance for Power Wheelchair Using Neural Network.- Residual Whitening Method for Identification of Induction Motor System.- Analysis and Simulation of Small-sized Quasi-servo Valve Using Tiny On/off Control Valve.- Analysis of Flexible Thin Actuator Using Gas-Liquid Phase-Change of Low Boiling Point Liquid.- Development of Flexible Pneumatic Cylinder with String Type Displacement Sensor for Flexible Spherical Actuator.- Evaluation of Computing Reliability in Internet Computing.- An Effective Method for Classification of White Rice Grains Using Various Image Processing Techniques.- Applying ZigBee Wireless Sensors and Photovoltaic System to Plant Factory.- Applying Particle Filter Technology to Object Tracking.- Measurement of Thickness and Refractive Index of Optical Samples in FD-OCT with Two Orthogonal Polarized Lights.- Fabrication of Peristaltic Micropump with UV Curable Adhesive.- Detecting Object Edges by Xtion Pro and Open Sources.- Temperature Control of a Baking System for an Ultra-high-vacuum Insertion Device.- Microarray Data Analysis with Support Vector Machine.- Feature Selection Algorithm for Motor Quality Types using Weighted Principal Component Analysis.- Feasibility Test of Range of Motion Exercise for Ankle Joints Rehabilitation using Pneumatic Soft Actuators.- 3D Motion Editing Through B-Spline Fitting with Constraints.- An ARAR-Tree-Based Diagnosis Mechanism for Rule Anomalies among Internet Firewalls.- Development of Active Orthosis for Lumbago Relief.- Controller Design by Time-domain Objective Functions Using Cuckoo Search.- Behavior Network-based Risk Recognition Method.- Reinforcement Learning with Multiple Actions.- Wind Turbine Blade Load Alleviation Performance Employing Individual Pitch Control.- Planet Editing Method using Leap Motions.- Development of Flexible Haptic Robot Arm Using Flexible Pneumatic Cylinders with Backdrivability for Bilateral Control.- Integration Method of Proxy and Producer-Consumer Patterns.- Bayesian Probability and User Experience-based Smart UI Design Method.- Bayesian Probability-based Hand Property Control Method.- Implementation of a Delta-Sigma Analog-to-Digital Converter.- An Experimental Investigation of Effect on Engine Performance by Controlling the Temperature of the Fuel.- Modeling of an AIGaAs-based VCSEL with Bragg Mirrors.- Risk Decision Method based on Sensory Values of Smart Devices.- A Flywheel Energy Storage System Suspended by Active Magnetic Bearings Using a Fuzzy Control with Radial Basis Function Neural Network.- A Matrix Robot for Block-Stacking.- A Study of Regular Transmission Delay in Bluetooth Communications.- IEEE 802.16J-Based Multihop Relays for Future Performance Enhancement of Aeronautical Mobile Airport Communications Systems (AeroMACS).- Explore the Influential Factors on Maritime Accidents by Regression Approach.- Analytical Model of Pipe Inspection Robot Using Flexible Pneumatic Cylinder.- Thermal Resistance Characterization of SIGe Based HBTs on Thick-Film and Thin-Film SOI.- Improved Item Relational Structure Theory Based on Liu's Item Ordering Consistence Property.- Enhancement of Digitized Old Film Using Inpainting Based Method.- Study of Nickel Catalysts Deposited by using the Electroless Plating Method and Growth the Multiwall Carbon Nanotubes.- Photovoltaic Power Generation System Modeling Using and Artificial Neural Network.- Thermal Stress Analysis of Layer-Wise Functionally Graded Material Beam Considering Neutral Plane.- A Smart Home Automation System.- Material Structure Selection of Solution Blue OLEDs Using a Design o
Описание: This book provides an insight into ways of inculcating the need for applying mobile edge data analytics in bioinformatics and medicine. The contributors also include information on microarray data analysis, sequence analysis, genomics based analytics, disease network analysis, and techniques for big data Analytics and health information technology.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
