Описание: and chemical process technologies, including ultrasonic technology, capillary rising process, pneumatic classification, membrane electrolysis and absorption processes, it reports on developments in the field of heat and mass transfer, energy-efficient technologies, and industrial ecology.
Описание: This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on design and simulation issues.
This book reports on topics at the interface between mechanical and chemical engineering, emphasizing design, simulation, and manufacturing. Specifically, it covers recent developments in the mechanics of solids and structures, numerical simulation of coupled problems, including fatigue, fluid behavior, particle movement, pressure distribution. Further, it reports on developments in chemical process technology, heat and mass transfer, energy-efficient technologies, and industrial ecology. Based on the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2021), held on June 8-11, 2021, in Lviv, Ukraine, this second volume of a 2-volume set provides academics and professionals with extensive information on trends, technologies, challenges and practice-oriented experience in the above-mentioned areas.
Автор: Ivanov Название: Advances in Design, Simulation and Manufacturing V ISBN: 3031060245 ISBN-13(EAN): 9783031060243 Издательство: Springer Рейтинг: Цена: 32142.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on smart and sustainable manufacturing. It describes innovative research in design engineering and manufacturing technology, covering the development and characterization of advanced materials alike. It also discusses key aspects related to ICT in engineering education. Based on the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2022), held on June 7-10, 2022, in Poznan, Poland, this first volume of a 2-volume set provides academics and professionals with extensive information on trends and technologies, and challenges and practice-oriented experience in all the above-mentioned areas.
Автор: Francisco Cavas-Mart?nez; Benoit Eynard; Francisco Название: Advances on Mechanics, Design Engineering and Manufacturing II ISBN: 3030123456 ISBN-13(EAN): 9783030123451 Издательство: Springer Рейтинг: Цена: 34937.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.
Описание: A unique text that looks at events from a very different perspective - that of how and why events fail and what can be learnt from this in both a practical and academic perspective. It provides a case study approach to the event planning process with the cases illustrating how core planning theory and concepts fails to emerge in practice and why.
Описание: The book covers a wide range of applied research compactly presented in one volume, and shows innovative engineering solutions for automotive, marine and aviation industries, as well as power generation. While targeting primarily the audience of professional scientists and engineers, the book can also be useful for graduate students, and also for all those who are relatively new to the area and are looking for a single source with a good overview of the state-of-the-art as well as an up-to-date information on theories, numerical methods, and their application in design, simulation, testing, and manufacturing. The readers will find here a rich mixture of approaches, software tools and case studies used to investigate and optimize diverse powertrains, their functional units and separate machine parts based on different physical phenomena, their mathematical representation, solution algorithms, and experimental validation.
Автор: Philippe Boisse Название: Advances in Composites Manufacturing and Process Design, ISBN: 1782423079 ISBN-13(EAN): 9781782423072 Издательство: Elsevier Science Рейтинг: Цена: 35034.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The manufacturing processes of composite materials are numerous and often complex. Continuous research into the subject area has made it hugely relevant with new advances enriching our understanding and helping us overcome design and manufacturing challenges. Advances in Composites Manufacturing and Process Design provides comprehensive coverage of all processing techniques in the field with a strong emphasis on recent advances, modeling and simulation of the design process. Part One reviews the advances in composite manufacturing processes and includes detailed coverage of braiding, knitting, weaving, fibre placement, draping, machining and drilling, and 3D composite processes. There are also highly informative chapters on thermoplastic and ceramic composite manufacturing processes, and repairing composites. The mechanical behaviour of reinforcements and the numerical simulation of composite manufacturing processes are examined in Part Two. Chapters examine the properties and behaviour of textile reinforcements and resins. The final chapters of the book investigate finite element analysis of composite forming, numerical simulation of flow processes, pultrusion processes and modeling of chemical vapour infiltration processes.
The book aims to provide principles of chemical engineering design and at the same time examples of their application using the most often employed simulation software. The book is divided into four sections: Introduction to design and simulation; Design and simulation of single unit operations; Plant design and simulation -- conventional components; and Plant design and simulation -- nonconventional components.
The first section describes basic methodologies for computer aided design followed by a description of basic steps of process simulation in Aspen Plus and Aspen HYSYS. Process concept syntheses, data collection, thermodynamic phase equilibrium, physical properties, conventional and nonconventional components, and chemical reaction data are the main topics of this section. The second section is devoted to the design and simulation of individual single unit operations. After representing a mathematical model of each unit operation such as reactors, separators, heat exchangers etc., examples of real problems are solved using Aspen Plus and Aspen HYSYS respectively. Specific requirements for the model of a given type of equipment, is highlighted, and method of its selection and costing are shown.
The third section describes the design of new plants and simulation of existing plants where conventional chemicals and material mixtures with measurable compositions are used. In this section, material integration, energy analysis and economic evaluation are described and shown on examples in Aspen Plus and Aspen HYSYS respectively. Specific tools of Aspen Plus and Aspen HYSYS for energy and economic analysis of processes are also applied to real examples. The use of programs such as Aspen Exchanger Design and Rating (EDR) for detailed design of shell and tube heat exchangers, Aspen Energy Analyser (AEA) for pinch point analysis and design of heat exchanger networks, and Aspen Economic Evaluation for mapping, sizing and economic evaluation of processes, is introduced in the book. The final section covers plant design and simulation of processes using nonconventional components. In many industrial processes, exact composition of material streams is not known. Design and simulation of such processes requires specific approaches. Petroleum refining and upgrading of crude oil distillation products, combustion, gasification, pyrolysis and drying of different solids, and many other processes belong to this group.
The capability modeling and simulation (M&S) supplies for managing systems complexity and investigating systems behaviors has made it a central activity in the development of new and existing systems. However, a handbook that provides established M&S practices has not been available. Until now. Modeling and Simulation-Based Systems Engineering Handbook details the M&S practices for supporting systems engineering in diverse domains. It discusses how you can identify systems engineering needs and adapt these practices to suit specific application domains, thus avoiding redefining practices from scratch.
Although M&S practices are used and embedded within individual disciplines, they are often developed in isolation. However, they address recurring problems common to all disciplines. The editors of this book tackled the challenge by recruiting key representatives from several communities, harmonizing the different perspectives derived from individual backgrounds, and lining them up with the book's vision. The result is a collection of M&S systems engineering examples that offer an initial means for cross-domain capitalization of the knowledge, methodologies, and technologies developed in several communities. These examples provide the pros and cons of the methods and techniques available, lessons learned, and pitfalls to avoid.
As our society moves further in the information era, knowledge and M&S capabilities become key enablers for the engineering of complex systems and systems of systems. Therefore, knowledge and M&S methodologies and technologies become valuable output in an engineering activity, and their cross-domain capitalization is key to further advance the future practices in systems engineering. This book collates information across disciplines to provide you with the tools to more efficiently design and manage complex systems that achieve their goals.
Автор: V.K. Jain Название: Micromanufacturing Processes ISBN: 1138076422 ISBN-13(EAN): 9781138076426 Издательство: Taylor&Francis Рейтинг: Цена: 9645.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Increased demand for and developments in micromanufacturing have created a need for a resource that covers both the science and technology of this rapidly growing area. With contributions from eminent professors and researchers actively engaged in teaching, research, and development, Micromanufacturing Processes details the basic principles, tools, techniques, and latest advances in micromanufacturing processes. It includes coverage of measurement techniques and research trends as well as a large number of cross-references, making it useful to the students and researchers alike.
The book outlines the challenges faced not only in micromanufacturing but also in meso- and nanomanufacturing, exploring topics such as micromachining, micro welding, microforming, micromolding, nanofinishing and micro-/nano-metrology. It includes examples that demonstrate the capabilities of fabricating micro- / nano-products and micro- / nano-features on the macro and micro products. The text also discusses nanofinishing techniques giving surface finish in the domain of sub-nano level, micro welding techniques, namely, laser beam micro welding, electron beam micro welding, micro / nano patterning in large quantities, and micro / nano metrology principles and equipments. It goes on to describe devices such as nano spring, micro mixer, micro cantilever, to name just a few.
Unique in its level of coverage, the book highlights new challenges in manufacturing and covers several different types of micromanufacturing processes, such as micromachining, microforming, microcasting, microjoining, nanofinishing, and micrometrology. The level of details, extensive references, figures, and diagrams make the book a reference that will become the standard for this field.
Описание: Presents advances in the integration and the optimization of product design and manufacturing systems. This book is of interest to engineers, researchers, academic staff, and postgraduate students interested in integrated design and manufacturing in mechanical engineering.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
