Описание: Describes underground installation and pressure testing requirements for polyvinyl chloride (PVC) and molecularly oriented polyvinyl chloride (PVCO) pressure pipe and fittings used to transport potable water, reclaimed water, irrigation water, and wastewater, or for the conveyance of any fluid compatible with PVC or PVCO.
Описание: Describes polyethylene (PE) pressure pipe and fittings made from materials conforming to standard PE materials designation codes PE 2606, PE 2706, PE 2708, PE 3608, PE 3708, PE 3710, PE 4608, PE 4708, and PE 4710.
Описание: Covers valves, fittings, service saddles, and meter setters for use in a service line from the main through the meter valve or meter-setting appurtenance. Valves, fittings, and meter setters described in this standard include 1/2 in. (12.5 mm) through 2 in. (50.8 mm).
Описание: The purpose of this standard is to provide the requirements for coal-tar protective coatings and linings for steel water pipelinesÑenamel and tapeÑhot applied, including materials, application, verification, and delivery. This standard can be referenced in purchase documents for hot-applied coaltar protective coatings and linings of steel water pipelines. The stipulations of this standard apply when this document has been referenced and then only to protective coatings and linings of steel water pipelines with hot-applied coal-tar enamel systems and to hot-applied coal-tar tape on the exterior of special sections, connections, and fittings.
Описание: Provides the minimum performance requirements for tape coating systems for the exterior of steel water pipelines, including system components application inspection testing and marking and packaging requirements.
Название: Ductile-Iron and Gray-Iron Fittings ISBN: 1647170788 ISBN-13(EAN): 9781647170783 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 21483.00 р. Наличие на складе: Нет в наличии.
Описание: This standard covers 76 to 1,219-mm gray-iron and/or ductile-iron fittings to be used with ductile-iron pipe for water. Requirements for fittings with mechanical joints and flanged joints are listed in Tables 1 t o20 at the end of this standard. This standard may also be used for fittings with push-on joints.
Название: M75 Elastomers for Waterworks: Pipes, Valves, and Fittings ISBN: 1647170044 ISBN-13(EAN): 9781647170042 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 23978.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This manual presents the history and general application of elastomers in waterworks pipes, valves, and fittings. It provides guidance on generally available elastomers and products and their application. Questions about specific situations or applicability to specific valves or fittings should be directed to the manufacturer or supplier. Information contained in this manual is useful for operators, technicians, and engineers for gaining a basic understanding of the use and selection of elastomers.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
