Recycling of Demolished Concrete and Masonry, Hansen, T.C.
Автор: Arya, Chanakya Название: Design of Structural Elements ISBN: 1032076321 ISBN-13(EAN): 9781032076324 Издательство: Taylor&Francis Рейтинг: Цена: 19906.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Автор: Como Mario Название: Statics of Historic Masonry Constructions ISBN: 3319854682 ISBN-13(EAN): 9783319854687 Издательство: Springer Рейтинг: Цена: 32142.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: From the content.- Masonry Strength and Deformability.- Fundamentals of Statics.- Masonry Arches.
Автор: Sowden, A.M. Название: Maintenance of Brick and Stone Masonry Structures ISBN: 0419149309 ISBN-13(EAN): 9780419149309 Издательство: Taylor&Francis Рейтинг: Цена: 56654.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Автор: Vasilis Sarhosis, Katalin Bagi, J.V. Lemos, Gabriele Milani Название: Computational Modeling of Masonry Structures Using the Discrete Element Method ISBN: 1522502319 ISBN-13(EAN): 9781522502319 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 30631.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Explores the latest digital solutions for the analysis and modelling of brick, stone, concrete, granite, limestone, and glass block structures. Focusing on critical research on mathematical and computational methods for masonry analysis, this publication is a pivotal reference source for scholars, engineers, consultants, and graduate-level engineering students.
Описание: The research and its outcomes presented in this book treat applications of NDT techniques to on-site measurements. These on-site measurements have been marginally successful as each technique requires a particular analysis. In this regard, visualization and imaging of results are in great demand for practitioners and engineers for inspection. This volume, in which on-site measurements of concrete and masonry structures by NDT techniques are comprehensively summarized, focuses on the visualization procedure of the results measured. The book will therefore be of great value to the field.
Автор: Arya, Chanakya (university College, London) Название: Design of structural elements ISBN: 1032076313 ISBN-13(EAN): 9781032076317 Издательство: Taylor&Francis Рейтинг: Цена: 7654.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The fourth edition of Design of Structural Elements: Concrete, Steelwork, Masonry and Timber Designs to Eurocodes is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry and composites. It provides design principles and guidance in line with Eurocodes, current as of 2021. Topics include the philosophy of design, sustainable development, basic structural concepts, and material properties. After an overview of structural design, the book contains self-contained chapters with numerous diagrams and worked examples on design in reinforced concrete, structural steelwork and steel/concrete composites, masonry and timber based on EN 1990-1997. Selected extracts from these publications assist familiarity. Elements considered cover reinforced concrete and composite floors, isolated foundation, cantilever retaining wall, load-bearing and panel walls, stud wall and connections. The text is ideal for student civil and structural engineers on degree and diploma courses, and also practising civil and structural engineers and other built environment professions. The online Support Materials for adopting course instructors includes an extensive set of solutions to the problems in the book and PowerPoint slides for use in lectures: www.routledge.com/9781032076317.
Автор: Lauritzen, E.K. Название: Demolition and Reuse of Concrete and Masonry ISBN: 0419184007 ISBN-13(EAN): 9780419184003 Издательство: Taylor&Francis Рейтинг: Цена: 65076.00 р. Наличие на складе: Поставка под заказ.
Описание: This book is intended to raise awareness about the use of sustainable Textile-Reinforced Mortar (TRM) composite systems, including plant fibers, for civil engineering applications. It presents a comprehensive characterization of the mechanical properties of Flax-TRM composite systems when used for strengthening masonry elements. Moreover, it reports on a physical and mechanical characterization of the single components, such as the textile and mortar one. In turn, it describes tensile tests on the composite and shear bond tests on Flax-TRM-to-masonry substrate elements, carried out for the purpose of analyzing the composite material and its adherence behavior with a brick masonry element. It also reports on the analysis of the contribution of the reinforcement system on the shear capacity of masonry elements, carried out via diagonal compression tests. Last but not least, the book reports on some innovative solutions for improving the mechanical performance of the reinforcement system, e.g., by treating the fiber or modifying the matrix mix design, discussing the experimental findings in detail. All in all, this book offers extensive information on the use of plant fibers as reinforcement in TRM systems, specifically highlighting the potential of this composite as strengthening strategy for various civil engineering applications. Moreover, it defines key mechanical aspects of the composite that must be taken into consideration for increasing the efficiency of the reinforcing system. Last but not least, the book describes some technical solutions aimed at an overall improvement of the structural performance of sustainable textile-reinforced composite.
Автор: Mckenzie, W.m.c. Название: Design of structural masonry ISBN: 0333792378 ISBN-13(EAN): 9780333792377 Издательство: Springer Рейтинг: Цена: 9502.00 р. Наличие на складе: Поставка под заказ.
Описание: "Design of Structural Masonry" provides a comprehensive source of information on practical masonry design, introduces the nature and inherent characteristics of masonry given in relation to the requirements of BS 5628 and introduces the use of Eurocode EC6 in structural masonry design.
Автор: Miltiadou-Fezans Androniki, Tassios Theodosios P. Название: Mix-Design and Application of Hydraulic Grouts for Masonry Strengthening ISBN: 3030859649 ISBN-13(EAN): 9783030859640 Издательство: Springer Рейтинг: Цена: 13974.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book provides guidance for the rational design and application of hydraulic grouts, based on a series of specific data (type of masonry, voids' width, targeted strength and durability level, available materials, etc.). To this end, the basic characteristics of a grout, i.e. its injectability (penetrability, fluidity and stability), its strength and durability, are taken into account by means of rational models and quantified expressions of all grout-design parameters. Thus, a holistic, rational mix design methodology for optimization of grout composition is given, permitting the preliminary design of grouts, without having to resort to multiple tests in advance. Moreover, detailed practical guidelines for grouting application and quality control, based on real case studies, are also included. The book attempts to rationalize the entire procedure of this poly-parametric decision-making, keeping however in mind the need for practical engineering solutions.
Описание: Brick and Block Masonry - From Historical to Sustainable Masonry focuses on historical, current and new ideas related to masonry development, and will be a valuable resource for researchers, representatives of industry and building management, for curators and conservators of monuments, and for students.
Автор: Ghiassi, Bahman Название: Ghiassi-Numerical Modelling of Masonry and Historical Struc ISBN: 0081024398 ISBN-13(EAN): 9780081024393 Издательство: Elsevier Science Рейтинг: Цена: 42950.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Numerical Modelling of Masonry and Historical Structures: From Theory to Application provides detailed information on the theoretical background and practical guidelines for numerical modeling of unreinforced and reinforced (strengthened) masonry and historical structures. The book consists of four main sections, covering seismic vulnerability analysis of masonry and historical structures, numerical modeling of unreinforced masonry, numerical modeling of FRP-strengthened masonry, and numerical modeling of TRM-strengthened masonry. Each section reflects the theoretical background and current state-of-the art, providing practical guidelines for simulations and the use of input parameters.
Covers important issues relating to advanced methodologies for the seismic vulnerability assessment of masonry and historical structures
Focuses on modeling techniques used for the nonlinear analysis of unreinforced masonry and strengthened masonry structures
Follows a theory to practice approach
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
