Guidelines for Process Hazards Analysis (PHA, HAZOP), Hazards Identification, and Risk Analysis, Hyatt, Nigel
Автор: Nirode Mohanty Название: Random Signals Estimation and Identification ISBN: 9401170436 ISBN-13(EAN): 9789401170437 Издательство: Springer Рейтинг: Цена: 6986.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The techniques used for the extraction of information from received or ob- served signals are applicable in many diverse areas such as radar, sonar, communications, geophysics, remote sensing, acoustics, meteorology, med- ical imaging systems, and electronics warfare.
Автор: Taylor, J.R. Название: Risk Analysis for Process Plant, Pipelines and Transport ISBN: 0367579847 ISBN-13(EAN): 9780367579845 Издательство: Taylor&Francis Рейтинг: Цена: 7348.00 р. Наличие на складе: Поставка под заказ.
Автор: Center For Chemical Process Safety (ccps) Название: Layer of protection analysis ISBN: 0816908117 ISBN-13(EAN): 9780816908110 Издательство: Wiley Рейтинг: Цена: 29930.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book explores the many different strands in the language of civil society from the sixteenth to the twentieth centuries. Through a series of case-studies it investigates the applicability of the term to a wide range of historical settings. The contributors show how past understandings of the term were often very different from (even in some respects the exact opposite of) those held today.
Автор: Naikar, Neelam Название: Work Domain Analysis ISBN: 0805861297 ISBN-13(EAN): 9780805861297 Издательство: Taylor&Francis Рейтинг: Цена: 17609.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Автор: Patchong, Alain Название: Implementing Standardized Work ISBN: 1466563435 ISBN-13(EAN): 9781466563438 Издательство: Taylor&Francis Рейтинг: Цена: 2142.00 р. Наличие на складе: Поставка под заказ.
Автор: Victor A. Skormin Название: Introduction to Process Control ISBN: 331942257X ISBN-13(EAN): 9783319422572 Издательство: Springer Рейтинг: Цена: 10760.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This textbook is intended for an introductory graduate level on process control, taught in most engineering curricula. It focuses on the statistical techniques and methods of control and system optimization needed for the mathematical modeling, analysis, simulation, control and optimization of multivariable manufacturing processes. In four sections, it covers: Relevant mathematical methods, including random events, variables and processes, and their characteristics; estimation and confidence intervals; Bayes applications; correlation and regression analysis; statistical cluster analysis; and singular value decomposition for classification applications. Mathematical description of manufacturing processes, including static and dynamic models; model validation; confidence intervals for model parameters; principal component analysis; conventional and recursive least squares procedures; nonlinear least squares; and continuous-time, discrete-time, s-domain and Z-domain models. Control of manufacturing processes, including transfer function/transfer matrix models; state-variable models; methods of discrete-time classical control; state variable discrete-time control; state observers/estimators in control systems; methods of decoupling control; and methods of adaptive control. Methods and applications of system optimization, including unconstrained and constrained optimization; analytical and numerical optimization procedures; use of penalty functions; methods of linear programming; gradient methods; direct search methods; genetic optimization; methods and applications of dynamic programming; and applications to estimation, design, control, and planning. Each section of the book will include end-of-chapter exercises, and the book will be suitable for any systems, electrical, chemical, or industrial engineering program, as it focuses on the processes themselves, and not on the product being manufactured. Students will be able to obtain a mathematical model of any manufacturing process, to design a computer-based control system for a particular continuous manufacturing process, and be able to formulate an engineering problem in terms of optimization, as well as the ability to choose and apply the appropriate optimization technique.
Автор: Polhemus, Neil W. Название: Process Capability Analysis ISBN: 0367572516 ISBN-13(EAN): 9780367572518 Издательство: Taylor&Francis Рейтинг: Цена: 7501.00 р. Наличие на складе: Поставка под заказ.
Описание: Presents research exploring the theoretical and practical aspects of microfluidics and its application in chemical engineering with the intention of building pathways for new processes and product developments in industrial areas. The book features a broad range of topics, including design techniques, hydrodynamics, and numerical modelling.
Автор: Martin, Mariano Название: Industrial Chemical Process Analysis and Design ISBN: 0081010931 ISBN-13(EAN): 9780081010938 Издательство: Elsevier Science Рейтинг: Цена: 11620.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Industrial Chemical Process Analysis and Design uses chemical engineering principles to explain the transformation of basic raw materials into major chemical products. The book discusses traditional processes to create products like nitric acid, sulphuric acid, ammonia, and methanol, as well as more novel products like bioethanol and biodiesel.
Historical perspectives show how current chemical processes have developed over years or even decades to improve their yields, from the discovery of the chemical reaction or physico-chemical principle to the industrial process needed to yield commercial quantities. Starting with an introduction to process design, optimization, and safety, Martin then provides stand-alone chapters--in a case study fashion--for commercially important chemical production processes. Computational software tools like MATLAB(R), Excel, and Chemcad are used throughout to aid process analysis.
Описание: Microfluidics represent great potential for chemical processes design, development, optimization, and chemical engineering bolsters the project design of industrial processes often found in large chemical plants. Together, microfluidics and chemical engineering can lead to a more complete and comprehensive process.Process Analysis, Design, and Intensification in Microfluidics and Chemical Engineering provides emerging research exploring the theoretical and practical aspects of microfluidics and its application in chemical engineering with the intention of building pathways for new processes and product developments in industrial areas. Featuring coverage on a broad range of topics such as design techniques, hydrodynamics, and numerical modelling, this book is ideally designed for engineers, chemists, microfluidics and chemical engineering companies, academicians, researchers, and students.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
