Автор: Radzevich, Stephen P. (johnson Controls Inc., Mich Название: Theory of gearing ISBN: 1138585556 ISBN-13(EAN): 9781138585553 Издательство: Taylor&Francis Цена: 36749.00 р. Наличие на складе: Нет в наличии. Описание: Written by a leading expert, Theory of Gearing: Kinematics, Geometry, and Synthesis, Second Edition is intended for engineers and researchers in the field of gear design, gear production, gear inspection, and application of gears. It focuses on the scientific theory of gearing, in all its aspects, and its application to new gear types and designs.
Описание: Caused by downsizing of combustion engines, the torque fluctuation at the crankshaft induces torsional vibrations in the powertrain. Manual transmissions and dual clutch transmissions are particularly sensitive to gear-rattle noise. Gear-rattle noise arises from oscillations of loose parts with clearance, e.g. idler gears, synchronizer rings and gearshift sleeves. The aim of this research is the formulation of a gear oil for the application in a manual transmission to minimize gear rattling noise. Acoustic measurements on a gear-rattle noise test bench verify the noise reduction of the developed gear oils with commonly used low oil viscosity. An analysis of the transmission error proves that gear tooth impacts during rattling lead to elastic deformation of the meshing gear pairs. The main source for the intensity of gear-rattle noise is the additional presence of meshing impacts at the beginning of each gear pair meshing. Gear-rattle noise reduction can be achieved by avoiding meshing impacts, e.g. by minimizing the traction coefficient of the gear oil.
Автор: D.W. Dudley; Bonfiglioli Riduttori S.p.A.; J. Spre Название: Gear Motor Handbook ISBN: 3642795919 ISBN-13(EAN): 9783642795916 Издательство: Springer Рейтинг: Цена: 15672.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: In these years of constant growth and further development for our company, research and development has become more and more important, and has allowed us to be at the forefront in our business sector, where innovation is the obvious and decisive factor.
Автор: Gupta, Kapil Название: Advanced Gear Manufacturing and Finishing ISBN: 0128044608 ISBN-13(EAN): 9780128044605 Издательство: Elsevier Science Рейтинг: Цена: 16666.00 р. Наличие на складе: Поставка под заказ.
Описание:
Advanced Gear Manufacturing and Finishing offers detailed coverage of advanced manufacturing technologies used in the production of gears, including new methods such as spark erosion machining, abrasive water jet machining, additive layer manufacturing, laser shaping, and sustainable manufacturing of gears.
The industry in this area is constantly producing new settings where gears must endure ever increasing stresses, strains, and temperatures. Advanced methods in manufacturing, finishing, and surface property enhancement have emerged in recent years to meet these challenges.
This unique book takes a critical look at the state-of-the-art research into these new methods, and the latest improvements to classic technologies in both gear manufacturing and finishing. This book is essential reading for researchers and engineers working in the fields of powertrain manufacturing, gear technology, and advanced manufacturing technologies.
Автор: Veniamin Goldfarb; Evgenii Trubachev; Natalya Barm Название: Advanced Gear Engineering ISBN: 3319603981 ISBN-13(EAN): 9783319603988 Издательство: Springer Рейтинг: Цена: 25155.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Topics treated range from fundamental research to the advanced applications of gears in various practical fields, prospects of manufacturing development, results and trends of numerical and experimental research of gears, new approaches to gear design and aspects of their optimization synthesis.
Автор: Kaajakari Ville Название: Practical MEMS ISBN: 0982299109 ISBN-13(EAN): 9780982299104 Издательство: Amazon Internet Рейтинг: Цена: 13518.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: We often learn our most important lessons when we are challenged by something that removes us from our comfort zone. Sometimes we, as adults, find ourselves open to growth while struggling with events that are happening directly to us, but growth can also occur while viewing challenges through the eyes of others. All of us have been affected by the Covid-19 pandemic in unique yet similar ways. As difficult as it has been for adults, children have been impacted as well, viewing the pandemic through a different lens. They have been forced to accept a new reality, both in and out of school. However, it can also open a door to growth in ways we did not anticipate. Seeing the ways their peers cope with changes in their own lives can provide new and eye-opening insights on how to meet their own challenges. This insight may enable them to develop a sense of empathy and kindness. This is a heart-warming tale about a little boy with a big heart who learns some important life lessons. Against the backdrop of the Covid-19 pandemic, he comes to see that not everyone is as fortunate as him and his family. He also learns the lesson that in giving, we also receive...and that giving, when you have, or when you make, the opportunity, often gives us a feeling of warmth and home.
Автор: Goldfarb Veniamin, Trubachev Evgenii, Barmina Natalya Название: New Approaches to Gear Design and Production ISBN: 3030349446 ISBN-13(EAN): 9783030349448 Издательство: Springer Рейтинг: Цена: 20962.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: It describes advanced approaches to research, design, testing and production of various kinds of gears for a vast range of applications, with a particular focuses on advanced computer-aided approaches for gear analysis, simulation and design, the application of new materials and tribological issues.
Автор: Arnaudov Название: Planetary Gear Trains ISBN: 1138311855 ISBN-13(EAN): 9781138311855 Издательство: Taylor&Francis Рейтинг: Цена: 22202.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book provides comprehensive information for various planetary gear trains, with practical applications and a comprehensive list of references. In the text`s chapters, readers can find the all information needed for major types of gear trains. The text includes many illustrations, and examples from practice.
Автор: Lynwander, Peter Название: Gear Drive Systems ISBN: 0824718968 ISBN-13(EAN): 9780824718961 Издательство: Taylor&Francis Рейтинг: Цена: 39811.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Автор: Jack Phillips Название: General Spatial Involute Gearing ISBN: 3642079180 ISBN-13(EAN): 9783642079184 Издательство: Springer Рейтинг: Цена: 28732.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: I mean by this that, by writing it backwards, from its found ends {practical machinable teeth) to its tentative beginnings (dimly perceived geometrical notions), one might conceivably write a manual, not on how to understand these kinds of gears, but on how to make them.
Описание: A printed collection of 48 full-length, peer-reviewed technical papers. Topics include 2019 International Power Transmission and Gearing Conference (PTG).
Автор: Veniamin Goldfarb; Natalya Barmina Название: Theory and Practice of Gearing and Transmissions ISBN: 3319197398 ISBN-13(EAN): 9783319197395 Издательство: Springer Рейтинг: Цена: 19591.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book brings together papers from all spheres of mechanical engineering related to gears and transmissions, from fundamentals to advanced applications, from academic results in numerical and experimental research, to new approaches to gear design and aspects of their optimization synthesis and to the latest developments in manufacturing.
Автор: Radzevich, Stephen P. (johnson Controls Inc., Mich Название: Theory of gearing ISBN: 1138585556 ISBN-13(EAN): 9781138585553 Издательство: Taylor&Francis Рейтинг: Цена: 36749.00 р. Наличие на складе: Нет в наличии.
Описание: Written by a leading expert, Theory of Gearing: Kinematics, Geometry, and Synthesis, Second Edition is intended for engineers and researchers in the field of gear design, gear production, gear inspection, and application of gears. It focuses on the scientific theory of gearing, in all its aspects, and its application to new gear types and designs.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
