Introduction to Numerical and Analytical Methods with MATLAB® for Engineers and Scientists, Bober, William
Автор: Farzin Asadi, Robert E. Bolanos, Jorge Rodriguez Название: Feedback Control Systems: The MATLAB®/Simulink® Approach ISBN: 1681735393 ISBN-13(EAN): 9781681735399 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 15523.00 р. Наличие на складе: Нет в наличии.
Описание: Feedback control systems is an important course in aerospace engineering, chemical engineering, electrical engineering, mechanical engineering, and mechatronics engineering, to name just a few. Feedback control systems improve the system's behavior so the desired response can be achieved. The first course on control engineering deals with Continuous Time (CT) Linear Time Invariant (LTI) systems. Plenty of good textbooks on the subject are available on the market, so there is no need to add one more. This book does not focus on the control engineering theories as it is assumed that the reader is familiar with them, i.e., took/takes a course on control engineering, and now wants to learn the applications of MATLAB ® in control engineering. The focus of this book is control engineering applications of MATLAB ® for a first course on control engineering.
Автор: Marghitu Название: Mechanical Simulation with MATLAB® ISBN: 3030881040 ISBN-13(EAN): 9783030881047 Издательство: Springer Рейтинг: Цена: 7965.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book deals with the simulation of the mechanical behavior of engineering structures, mechanisms and components. It presents a set of strategies and tools for formulating the mathematical equations and the methods of solving them using MATLAB. For the same mechanical systems, it also shows how to obtain solutions using a different approaches. It then compares the results obtained with the two methods. By combining fundamentals of kinematics and dynamics of mechanisms with applications and different solutions in MATLAB of problems related to gears, cams, and multilink mechanisms, and by presenting the concepts in an accessible manner, this book is intended to assist advanced undergraduate and mechanical engineering graduate students in solving various kinds of dynamical problems by using methods in MATLAB. It also offers a comprehensive, practice-oriented guide to mechanical engineers dealing with kinematics and dynamics of several mechanical systems.
Автор: Dan B. Marghitu; Mihai Dupac; Nels H. Madsen Название: Statics with MATLAB® ISBN: 1447161955 ISBN-13(EAN): 9781447161950 Издательство: Springer Рейтинг: Цена: 18167.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book presents MATLAB (R) as a highly convenient tool to solve problems in the theory and applications of statics. It features example problems that demonstrate the MATLAB (R) syntax and also introduce specific functions dealing with statics.
Автор: Farzin Asadi, Robert E. Bolanos, Jorge Rodriguez Название: Feedback Control Systems: The MATLAB®/Simulink® Approach ISBN: 1681735415 ISBN-13(EAN): 9781681735412 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 18572.00 р. Наличие на складе: Нет в наличии.
Описание: Feedback control systems is an important course in aerospace engineering, chemical engineering, electrical engineering, mechanical engineering, and mechatronics engineering, to name just a few. Feedback control systems improve the system's behavior so the desired response can be achieved. The first course on control engineering deals with Continuous Time (CT) Linear Time Invariant (LTI) systems. Plenty of good textbooks on the subject are available on the market, so there is no need to add one more. This book does not focus on the control engineering theories as it is assumed that the reader is familiar with them, i.e., took/takes a course on control engineering, and now wants to learn the applications of MATLAB ® in control engineering. The focus of this book is control engineering applications of MATLAB ® for a first course on control engineering.
Автор: Stevens, Alan Название: Monte-carlo simulation ISBN: 1032280778 ISBN-13(EAN): 9781032280776 Издательство: Taylor&Francis Рейтинг: Цена: 13014.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Monte-Carlo techniques have increasingly become a key method used in quantitative research. This book introduces engineers and scientists to the basics of using the Monte-Carlo simulation method which is used in Operations Research and other fields to understand the impact of risk and uncertainty in prediction and forecasting models.Monte-Carlo Simulation: An Introduction for Engineers and Scientists explores several specific applications in addition to illustrating the principles behind the methods. The question of accuracy and efficiency with using the method is addressed thoroughly within each chapter and all program listings are included in the discussion of each application to facilitate further research for the reader using Python programming language.Beginning engineers and scientists either already in or about to go into industry or commercial and government scientific laboratories will find this book essential. It could also be of interest to undergraduates in engineering science and mathematics, as well as instructors and lecturers who have no prior knowledge of Monte-Carlo simulations.
Автор: Ferry, David Название: Quantum mechanics ISBN: 0367467275 ISBN-13(EAN): 9780367467272 Издательство: Taylor&Francis Рейтинг: Цена: 12707.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Quantum Mechanics: An Introduction for Device Physicists and Electrical Engineers, Third Edition provides a complete course in quantum mechanics for students of semiconductor device physics and electrical engineering.
Описание: When students once master the concepts of the finite element method (and meshing), it’s not long before they begin to look at other numerical techniques and applications, especially the boundary element and meshless methods (since a mesh is not required). The expert authors of this book provide a simple explanation of these three powerful numerical schemes and show how they all fall under the umbrella of the more universal method of weighted residuals.The book is structured in four sections. The first introductory section provides the method of weighted residuals development of finite differences, finite volume, finite element, boundary element, and meshless methods along with 1D examples of each method. The following three sections of the book present a more detailed development of the finite element method, then progress through the boundary element method, and end with meshless methods. Each section serves as a stand-alone description, but it is apparent how each conveniently leads to the other techniques. It is recommended that the reader begin with the finite element method, as this serves as the primary basis for defining the method of weighted residuals.
Автор: Kharab, Abdelwahab Название: An Introduction to Numerical Methods ISBN: 1032406836 ISBN-13(EAN): 9781032406831 Издательство: Taylor&Francis Рейтинг: Цена: 8879.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Offer an overview of conjugate methods and their more typical applications, with an emphasis on the advantages and benefits of this type of engineering analysis. This title reviews basics of heat conduction in solids and convective heat transfer. It also offers both analytic and numerical methods for solving conjugate boundary condition problems.
Автор: Kleiber Michal, Kowalczyk Piotr Название: Introduction to Nonlinear Thermomechanics of Solids ISBN: 3319815172 ISBN-13(EAN): 9783319815176 Издательство: Springer Рейтинг: Цена: 6986.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book then concentrates on developing governing equations for the problem dealing in turn with the kinematics of material continuum, description of the state of stress, discussion of the fundamental conservation laws of underlying physics, formulation of initial-boundary value problems and presenting weak (variational) formulations.
Автор: Bober Название: MATLAB® Essentials ISBN: 1138563285 ISBN-13(EAN): 9781138563285 Издательство: Taylor&Francis Рейтинг: Цена: 24499.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: All disciplines of science and engineering use numerical methods for complex problem analysis, due to the highly mathematical nature of the field.
Автор: Jaluria, Yogesh Название: Computer Methods for Engineering with MATLAB® Applications ISBN: 1591690366 ISBN-13(EAN): 9781591690368 Издательство: Taylor&Francis Рейтинг: Цена: 22202.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
