Numerical Modeling Strategies for Sustainable Concrete Structures, Rossi
Автор: Abdelrahman, Amr Название: Strengthening of Concrete Structures ISBN: 9811980756 ISBN-13(EAN): 9789811980756 Издательство: Springer Рейтинг: Цена: 19564.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book presents unified design approach for strengthening concrete members with different techniques such as concrete, steel, and FRP jacketing. Preference between the various techniques is explained in light of strengthening limits, procedures, and application for each case. Examples for evaluation of existing structures and design equations for strengthening concrete elements are presented based on the ACI design codes and standards. Numerical examples are also given for different strengthening techniques with illustrations for the construction methodology and detailing for each case. Several case studies are explained starting from problem diagnosis, structure analysis, proposal for different strengthening methodologies, and implementation procedure for the selected scheme. The case studies include structures subjected to gravity loads, lateral loads, elevated temperature, and differential settlement of the foundations. It addresses design and construction errors, environmental impact, and soil movement. The case studies include conventional reinforced concrete, post-tensioned, and precast concrete members.
Автор: Samsher Bahadur Singh, Muthukumar Gopalaratham Название: Fiber Reinforced Polymeric Materials and Sustainable Structures ISBN: 9811989788 ISBN-13(EAN): 9789811989780 Издательство: Springer Рейтинг: Цена: 22359.00 р. Наличие на складе: Поставка под заказ.
Описание: This book deals with the introduction of various kinds of advanced composite materials such as carbon fiber-reinforced polymer (CFRP), glass fiber-reinforced polymer (GFRP), aramid fiber-reinforced polymer (AFRP), and basalt fiber-reinforced polymer (BFRP). This book covers the advantages and disadvantages of these advanced composite materials. The primary advantages, such as high specific strength and stiffness, of advance composite materials result in lighter and durable structures. On the other hand, its linear elastic behavior till failure has been highlighted as the main disadvantage for their structural applications. This book also highlights the various forms in which the FRP components are tailored and stacked up to optimize its strength and stiffness to deliver the high-performance structural as well as non-structural components in its real-life application. The various forms in which FRP materials are developed are described such as uni-directional, cross-ply, angle-ply, hybrid, and functionally graded composites. In addition, various forms in which these materials stacked and/ bonded to fabricate the various structural and non-structural components are described. Most importantly, techniques to extract plant-based cellulosic fibers and its application to fabricate the various forms of sustainable composite products are described. In addition, development of nano-particle-enforced cellulosic fibers for sustainable industrial products has also been presented. Furthermore, the use of advanced composites and natural fiber-based composites has been demonstrated for repair, rehabilitation, and retrofitting of deficient structural systems. Moreover, the comprehensive overview of the state-of-the-art research on the test methods for material characterization at room and elevated temperature is presented which will be of high interest to scientists, researchers, students, and engineers working in the fields of composite materials such as FRPs and other forms of composites such as fiber-reinforced concrete (FRC). This book is also helpful for undergraduate, masters, and most importantly Ph.D. research scholars for developing their fundamental understanding on advanced composite materials and their applications in construction as well as industrial sectors.
Автор: El-Reedy, Mohamed A. Название: Steel-Reinforced Concrete Structures ISBN: 1032525312 ISBN-13(EAN): 9781032525310 Издательство: Taylor&Francis Рейтинг: Цена: 15312.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book introduces the basic concepts of the finite element method in the static and dynamic analysis of beam, plate, shell and solid structures, discussing how the method works, the characteristics of a finite element approximation and how to avoid the pitfalls of finite element modeling.
Автор: Escalante-Garcia Название: Proceedings of the 75th RILEM Annual Week 2021 ISBN: 3031217349 ISBN-13(EAN): 9783031217340 Издательство: Springer Рейтинг: Цена: 39130.00 р. Наличие на складе: Поставка под заказ.
Описание: This volume gathers the latest advances, innovations and applications in the field of sustainable construction materials and structures, as presented by leading international researchers and engineers at the 75th RILEM Annual Week (75RW 2021), held in Merida, Mexico on August 29 – September 3, 2021. It covers topics such as supplementary cementitious materials, durability and Life Cycle assessment in urban and marine conditions, additive manufacturing of concrete in construction, structural performance and design, non-Portland cements and Alkali activated cementitious materials and eco-concrete, cultural heritage, non-destructive testing techniques, bituminous materials, and construction materials (polymers, timber, bamboo, recycling and masonry). The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Автор: Kumar, Naveen Название: Advanced Materials for a Sustainable Environment ISBN: 1032073055 ISBN-13(EAN): 9781032073057 Издательство: Taylor&Francis Рейтинг: Цена: 19906.00 р. Наличие на складе: Нет в наличии.
Автор: Ku?han Название: Materials, Structures and Manufacturing for Aircraft ISBN: 3030918750 ISBN-13(EAN): 9783030918750 Издательство: Springer Рейтинг: Цена: 20962.00 р. Наличие на складе: Поставка под заказ.
Описание: This book offers a comprehensive look at materials science topics in aerospace, air vehicle structures and manufacturing methods for aerospace products, examining recent trends and new technological developments. Coverage includes additive manufacturing, advanced material removal operations, novel wing systems, design of landing gear, eco-friendly aero-engines, and light alloys, advanced polymers, composite materials and smart materials for structural components. Case studies and coverage of practical applications demonstrate how these technologies are being successfully deployed. Materials, Structures & Manufacturing for Aircraft will appeal to a broad readership in the aviation community, including students, engineers, scientists, and researchers, as a reference source for material science and modern production techniques.
Автор: Guenter Hofstetter; Guenther Meschke Название: Numerical Modeling of Concrete Cracking ISBN: 3709111234 ISBN-13(EAN): 9783709111239 Издательство: Springer Рейтинг: Цена: 20962.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book presents the underlying theories of the different approaches for modeling cracking of concrete and offers a survey of the state-of-the-art in computational concrete mechanics. It covers a broad spectrum of topics related to modeling of cracks.
Автор: Ross-Clausen, Kristi Название: The Stagehand`s Toolkit ISBN: 1138839477 ISBN-13(EAN): 9781138839472 Издательство: Taylor&Francis Рейтинг: Цена: 3826.00 р. Наличие на складе: Нет в наличии.
Автор: Hertz Название: Sustainable Light Concrete Structures ISBN: 3030805026 ISBN-13(EAN): 9783030805029 Издательство: Springer Рейтинг: Цена: 9083.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book presents new technologies for easy and economical construction of light concrete structures saving materials and CO2. The new super-light technology allows a designer to place forces, where it is optimal, and save material everywhere else. The book also supports this “Direct Engineering” principle with a number of new details and structural principles. The new pearl-chain technology makes it possible to design optimal shapes such as arches, vaults, cupolas, floating tunnels, and shells etc. from inexpensive, and mass-produced components. The new super-light deck-elements presented in the book are now produced in six factories in Denmark, Finland, and USA, and the number is increasing. The book will be of interest for all structural engineers, who would like to save materials, CO2 and optimize their structures, for students learning about the new technologies, and for contractors and architects, who want to investigate new building technologies.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
