Advances in Materials Science for Environmental and Energy Technologies III - Ceramic Transactions ,Volume 250, Ohji
Автор: Yilbas, Bekir Название: Self-Cleaning of Surfaces and Water Droplet Mobility ISBN: 0128147768 ISBN-13(EAN): 9780128147764 Издательство: Elsevier Science Рейтинг: Цена: 36213.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Self-Cleaning of Surfaces and Water Droplet Mobility deals with the self-cleaning of hydrophobic surfaces. Chapters cover the basics of wetting states of fluids and surface characteristics in terms of texture topology and free energy. The self-cleaning aspects of surfaces, such as various synthesizing and fabrication processes are then introduced and discussed, along with environmental dust properties, including elemental compositions, particle sizes and shapes, and their chemo-mechanics characteristics. In addition, mud formation in humid air, as well as ambient and dry mud adhesion on optically transparent surfaces is explored, as is water droplet dynamics on hydrophilic and hydrophobic surfaces, amongst other topics.
The book fills the gap between the physical fundamentals of surface energy and texture characteristics for practical applications of surface cleaning and provides a basic understanding of the self-cleaning of surfaces that will be idea for academics, researchers and students.
Showcases the fundamental aspects of the self-cleaning of surfaces
Includes practical applications in energy and other sectors
Contains a review of the characterization of environmental dust on hydrophilic and hydrophobic surfaces
Discusses the fabrication and optimization of surfaces towards self-cleaning
Presents practical applications of the self-cleaning of surfaces via water droplet mobility
Описание: Part 1: Plenary Session.- Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies-Contributions of Professor Ramana Reddy.- Status of the Development of a Novel Flash Ironmaking Technology.- Innovations and Insights in Fluid Flow and Slime Adhesion for Improved Copper Electrorefining.- Molten Flux Design for Solid Oxide Membrane-Based Electrolysis of Aluminum from Alumina.- Effect of Slag Phase on Mixing and Mass Transfer in a Model Creusot Loire Uddeholm (CLU) Converter.- Part 2: Electrometallurgy.- Modeling of Aluminum Electrowinning in Ionic Liquid Electrolytes.- Electrochemical Processing of Rare Earth Alloys.- Effect of Cobalt Concentration on the Potential for Oxygen Evolution from Pb-Ca-Sn Anodes in Synthetic Copper Electrowinning Electrolytes.- Cobalt electrodeposition from cobalt chloride using urea and choline chloride ionic liquid: Effect of temperature, applied Voltage, and cobalt chloride concentration on current efficiency and energy consumption.- METTOP-BRX Technology - Eliminating Concerns and Highlighting Potentials of the Concept of Tankhouse Optimization.- Mathematical Modeling of Molten Salt Electrolytic Cells for Sodium and Lithium Production.- Part 3: Hydrometallurgy.- P-CAC, A Unique Separation Technology for PGM Recovery.- The Physical Characteristics of Electrorefined Copper Starter Sheet Material.- Extraction of Copper from Sulfate-Chloride Solutions by Using Hydroxyoxime Extractants.- Hydrometallurgical Processes for the Recovery of Rare Earths, Nickel and Cobalt in Chloride Medium.- A Cr6+-Free Extraction of Chromium Oxide from Chromite Ores using Carbothermic Reduction in the Presence of Alkali.- Part 4: Pyrometallurgy I.- Market Dynamics, Recycling and Recovery of Magnesium and Its Alloy from Scrap.- Alternative ways of Using Nonferrous Slags as Feed Material in the Ferrous Production Industry.- Insulating or Conductive Refractory Lining Designs for Electric Furnace Smelting?.- The influence of phosphorous additions on phase evolution in molten coal slag.- The Recovery of Copper From Smelting Slag by Flotation Process.- Reaction Mechanisms in the Silicothermic Production of Magnesium.- Influences of CaO/SiO2/MgO/Al2O3 on the Formation Behavior of FeO-bearing Primary-slags in Blast Furnace.- Desulfurization of high sulfur coal leached with H2O2 and NaOH by microwave irradiation.- Part 5: Pyrometallurgy II.- Chloridizing Roasting of Bismuthinite with Sodium Chloride-Oxygen.- Natural Gas Utilization in Blast Furnace Ironmaking: Tuyиre Injection, Shaft Injection and Prereduction.- Selective Sulfation Roasting of Rare Earths from NdFeB Magnet Scrap.- Gold solubility in smelting slags for the recycling of industrial and mining wastes.- Solid State Reduction Behavior of Iron, Chromium and Manganese Oxide Ores with Methane.- Stibnite chloridizing with calcium chloride-oxygen at roasting temperatures.- Investigations on Rotary Tool Near-dry Electric Discharge Machining.- Dependence of Ti2O3 and Temperatures on Electrical Conductivity of TiO2-FeO-Ti2O3 slags.- Part 6: Materials Processing and Plasma Processing.- PTA Cladding for Wear Application.- Production of SiMn-alloys by natural gas and Carbon black.- Effect of Flux Ratio on the Products of Self Propagating High Temperature Synthesis-Casting in WO3-Si-Al System.- Synthesis of Chrysin Based Cationic Lipids: Plasmid Delivery and Transgene Expression.- Part 7: Energy Storage and Engineering Issues.- Corrosion Mechanism of Haynes 230 with Ni Crucible in MgCl2-KCl.- Conceptualization of doped Black P thin films for potential use in photovoltaics with validation from first principle calculations.- Energy Efficiency and Sustainability in Steel Production.- Application of Surface Effect on Metallurgical Processes.- Part 8: Modeling and Simulation.- Metal Silicides for High-Temperature Thermoelectric Application.- CFD Modeling of Slag-Metal Reactions and Sulfur Refining Evolution in an Argo
Название: Kenaf Fibers & Composites ISBN: 1498753426 ISBN-13(EAN): 9781498753425 Издательство: Taylor&Francis Рейтинг: Цена: 29858.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book covers kenaf fibres and composites, from raw material preparation to final products. It discusses fibre characterization and properties, preparing kenaf based composites and design, manufacturing and applications. Cellulose-based kenaf composites and kenaf fibre-filled biopolymer composites are presented.
Описание: Part 1: Plenary Session.- Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies-Contributions of Professor Ramana Reddy.- Status of the Development of a Novel Flash Ironmaking Technology.- Innovations and Insights in Fluid Flow and Slime Adhesion for Improved Copper Electrorefining.- Molten Flux Design for Solid Oxide Membrane-Based Electrolysis of Aluminum from Alumina.- Effect of Slag Phase on Mixing and Mass Transfer in a Model Creusot Loire Uddeholm (CLU) Converter.- Part 2: Electrometallurgy.- Modeling of Aluminum Electrowinning in Ionic Liquid Electrolytes.- Electrochemical Processing of Rare Earth Alloys.- Effect of Cobalt Concentration on the Potential for Oxygen Evolution from Pb-Ca-Sn Anodes in Synthetic Copper Electrowinning Electrolytes.- Cobalt electrodeposition from cobalt chloride using urea and choline chloride ionic liquid: Effect of temperature, applied Voltage, and cobalt chloride concentration on current efficiency and energy consumption.- METTOP-BRX Technology - Eliminating Concerns and Highlighting Potentials of the Concept of Tankhouse Optimization.- Mathematical Modeling of Molten Salt Electrolytic Cells for Sodium and Lithium Production.- Part 3: Hydrometallurgy.- P-CAC, A Unique Separation Technology for PGM Recovery.- The Physical Characteristics of Electrorefined Copper Starter Sheet Material.- Extraction of Copper from Sulfate-Chloride Solutions by Using Hydroxyoxime Extractants.- Hydrometallurgical Processes for the Recovery of Rare Earths, Nickel and Cobalt in Chloride Medium.- A Cr6+-Free Extraction of Chromium Oxide from Chromite Ores using Carbothermic Reduction in the Presence of Alkali.- Part 4: Pyrometallurgy I.- Market Dynamics, Recycling and Recovery of Magnesium and Its Alloy from Scrap.- Alternative ways of Using Nonferrous Slags as Feed Material in the Ferrous Production Industry.- Insulating or Conductive Refractory Lining Designs for Electric Furnace Smelting?.- The influence of phosphorous additions on phase evolution in molten coal slag.- The Recovery of Copper From Smelting Slag by Flotation Process.- Reaction Mechanisms in the Silicothermic Production of Magnesium.- Influences of CaO/SiO2/MgO/Al2O3 on the Formation Behavior of FeO-bearing Primary-slags in Blast Furnace.- Desulfurization of high sulfur coal leached with H2O2 and NaOH by microwave irradiation.- Part 5: Pyrometallurgy II.- Chloridizing Roasting of Bismuthinite with Sodium Chloride-Oxygen.- Natural Gas Utilization in Blast Furnace Ironmaking: Tuyиre Injection, Shaft Injection and Prereduction.- Selective Sulfation Roasting of Rare Earths from NdFeB Magnet Scrap.- Gold solubility in smelting slags for the recycling of industrial and mining wastes.- Solid State Reduction Behavior of Iron, Chromium and Manganese Oxide Ores with Methane.- Stibnite chloridizing with calcium chloride-oxygen at roasting temperatures.- Investigations on Rotary Tool Near-dry Electric Discharge Machining.- Dependence of Ti2O3 and Temperatures on Electrical Conductivity of TiO2-FeO-Ti2O3 slags.- Part 6: Materials Processing and Plasma Processing.- PTA Cladding for Wear Application.- Production of SiMn-alloys by natural gas and Carbon black.- Effect of Flux Ratio on the Products of Self Propagating High Temperature Synthesis-Casting in WO3-Si-Al System.- Synthesis of Chrysin Based Cationic Lipids: Plasmid Delivery and Transgene Expression.- Part 7: Energy Storage and Engineering Issues.- Corrosion Mechanism of Haynes 230 with Ni Crucible in MgCl2-KCl.- Conceptualization of doped Black P thin films for potential use in photovoltaics with validation from first principle calculations.- Energy Efficiency and Sustainability in Steel Production.- Application of Surface Effect on Metallurgical Processes.- Part 8: Modeling and Simulation.- Metal Silicides for High-Temperature Thermoelectric Application.- CFD Modeling of Slag-Metal Reactions and Sulfur Refining Evolution in an Argo
This volume contains a collection of 22 papers submitted from the below seven symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada:
Additive Manufacturing Technologies
Advanced Materials, Technologies, and Devices for Electro-optical and Biomedical Applications
Multifunctional Coatings for Energy and Environmental Applications
Novel, Green, and Strategic Processing and Manufacturing Technologies
Powder Processing Technology for Advanced Ceramics
Computational Design and Modeling
Materials for Extreme Environments: Ultra-high Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)
Автор: Yafang Han Название: Advances in Energy and Environmental Materials ISBN: 9811343446 ISBN-13(EAN): 9789811343445 Издательство: Springer Рейтинг: Цена: 30745.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This proceedings volume gathers selected papers presented at the Chinese Materials Conference 2017 (CMC2017), held in Yinchuan City, Ningxia, China, on July 06-12, 2017.This book covers a wide range of energy conversion and storage materials, thermoelectric materials and devices, nuclear materials, solar energy materials and solar cells, minerals and oil and gas materials, photocatalytic materials for energy production, eco-materials, and environmental engineering materials.The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and has been held each year since the early 1990s. The 2017 installment included 37 Symposia covering four fields: Advances in energy and environmental materials; High performance structural materials; Fundamental research on materials; and Advanced functional materials. More than 5500 participants attended the congress, and the organizers received more than 700 technical papers. Based on the recommendations of symposium organizers and after peer reviewing, 490 papers have been included in the present proceedings, which showcase the latest original research results in the field of materials, achieved by more than 300 research groups at various universities and research institutes.
Описание: This book discusses the fundamental, synthesis, properties, physico-chemical characterizations and applications of recently explored nanocomposite materials. It covers the applications of these different nanocomposite materials in the environmental and energy harvesting fields. The chapters explore the different techniques used for preparation and characterization of several types of nanocomposite materials for applications related to environmental and energy pathways. This book presents a panorama of current research in the field of nanocomposite structures for different applications. It also assesses the advantages and disadvantages of using different types of nanocomposite in the design of different material products. The comprehensive chapters explain the interactions between nanocomposite materials and mechanisms related to applications in environmental pollution and energy shortage.
Автор: Heinz Plaumann, Mark Anthony Benvenuto Название: Green Chemistry: Advances in Alternative Energy ISBN: 3110706385 ISBN-13(EAN): 9783110706383 Издательство: Walter de Gruyter Рейтинг: Цена: 26024.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
The continued greening of the energy sector, with inroads being made through numerous sources of materials that can produce energy, is the main focus of this, Green Chemical Processing, Volume 8. It includes contributions from area experts in widely different fields, all involved in energy production, and makes connections to the 12 Principles of Green Chemistry.
Автор: Han Название: Advances in Energy and Environmental Materials ISBN: 9811301573 ISBN-13(EAN): 9789811301575 Издательство: Springer Рейтинг: Цена: 27950.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Effect of Co-doping on the Structure, Magnetic and Hydrogen Absorption Properties of Fe17Dy2 Compound.- Enhancement of Proton Conductivity of Polymer Electrolyte Membrane Enabled by Electrospun Nanofibers.- Preparation of Mechanical Alloying AlCuFe Alloy and Its Application in Li-ion battery Anode.
Описание: The Materials Science and Technology 2009 Conference and Exhibition (MS&T`09) was held October 25-29, 2009, in Pittsburgh, Pennsylvania. A major theme of the conference was Environmental and Energy Issues. Papers from three of the symposia held under that theme are included in this volume.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
