Описание: The drive to replace damaged tissues with "tissue engineered" constructs has led to fundamental questions on the importance of cell-cell and cell-substrate interactions to achieve the desired result. This study focuses on the use of microfabrication in optimization of a bioartificial liver device.
Автор: Huang, Liang Buonincontri, Guido Wang, Wenhui Название: 3D Electro-Rotation of Single Cells ISBN: 3031005384 ISBN-13(EAN): 9783031005381 Издательство: Springer Рейтинг: Цена: 7685.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Systems Engineering and Analysis of Electro-Optical and Infrared Systems integrates solid fundamental systems engineering principles, methods, and techniques with the technical focus of contemporary Electro-Optical and Infrared optics, imaging, and detection methodologies and systems.
Автор: Motoichi Ohtsu Название: Progress in Nano-Electro-Optics VI ISBN: 3642096719 ISBN-13(EAN): 9783642096716 Издательство: Springer Рейтинг: Цена: 21655.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: It begins with recent developments in near-field optical spectroscopy that clarify quantum states at the nanoscale, followed by a theory for a photon-electron-phonon interacting system at the nanoscale. a theory and experimental achievements on optical transport of nanoparticles, selectively manipulated by resonant radiation force.
Автор: Demosthenis I. Bardzokas; Michael L. Filshtinsky; Название: Mathematical Methods in Electro-Magneto-Elasticity ISBN: 3642090087 ISBN-13(EAN): 9783642090080 Издательство: Springer Рейтинг: Цена: 27950.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The mechanics of Coupled Fields is a discipline at the edge of modern research connecting Continuum Mechanics with Solid State Physics. A vast number of problems are considered so that the reader can get a clear quantitative and qualitative understanding of the phenomena taking place.
Автор: Schaeffer, Ronald Название: Fundamentals of Laser Micromachining ISBN: 1439860556 ISBN-13(EAN): 9781439860557 Издательство: Taylor&Francis Рейтинг: Цена: 27562.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Автор: Robert W. Johnstone; Ash Parmaswaran Название: An Introduction to Surface-Micromachining ISBN: 1475710771 ISBN-13(EAN): 9781475710779 Издательство: Springer Рейтинг: Цена: 13974.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Building up from the basic building block of microfabrication techniques, to the general surface-micromachining design, it will finish with the theory and design of concrete components.
Автор: Paulo Davim, J Название: Microfabrication and Precision Engineering ISBN: 0857094858 ISBN-13(EAN): 9780857094858 Издательство: Elsevier Science Рейтинг: Цена: 22233.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Microfabrication and precision engineering is an increasingly important area relating to metallic, polymers, ceramics, composites, biomaterials and complex materials. Micro-electro-mechanical-systems (MEMS) emphasize miniaturization in both electronic and mechanical components. Microsystem products may be classified by application, and have been applied to a variety of fields, including medical, automotive, aerospace and alternative energy. Microsystems technology refers to the products as well as the fabrication technologies used in production.
With detailed information on modelling of micro and nano-scale cutting, as well as innovative machining strategies involved in microelectrochemical applications, microchannel fabrication, as well as underwater pulsed Laser beam cutting, among other techniques, Microfabrication and Precision Engineering is a valuable reference for students, researchers and professionals in the microfabrication and precision engineering fields.
Описание: The Microsystems Series has as its goal the creation of an outstanding set of textbooks, references, and monographs on subjects that span the broad field of microsystems.
Автор: Hu, Junhui Название: Ultrasonic Nano/Microfabrication, Handling, and Driving ISBN: 103251972X ISBN-13(EAN): 9781032519722 Издательство: Taylor&Francis Рейтинг: Цена: 22202.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Автор: Robert Conant Название: Micromachined Mirrors ISBN: 1441953256 ISBN-13(EAN): 9781441953254 Издательство: Springer Рейтинг: Цена: 16977.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Micromachined scanning mirrors are interesting for a wide variety of applications because of their potential low cost, high speed, low power consumption, and reliability. These mirrors can offer significant advantages over macro-scale mirrors, but the fundamental limitations of scanning mirrors have not been widely discussed. Miniaturization in electronic systems has led to radical improvements in computers and communications, and micromachining technologies promise to generate such improvements in miniaturized mechanical and optical systems, including specifically higher-speed, smaller, lower-cost scanning mirrors. Micromachined Mirrors provides an overview of the performance enhancements that will be realized by miniaturizing scanning mirrors like those used for laser printers and barcode scanners, and the newly enabled applications, including raster-scanning projection video displays and compact, high-speed fiber-optic components. There are a wide variety of methods used to fabricate micromachined mirrors - each with its advantages and disadvantages. There are, however, performance criteria common to mirrors made from any of these fabrication processes. For example, optical resolution is related to the mirror aperture, the mirror flatness, and the scan angle. Micromachined Mirrors provides a framework for the design of micromirrors, and derives equations showing the fundamental limits for micromirror performance. These limits provide the micromirror designer tools with which to determine the acceptable mirror geometries, and to quickly and easily determine the range of possible mirror optical resolution and scan speed. Micromachined Mirrors presents descriptions of mirrors made from two fabrication processes - the surface-micromachining process and the staggered torsional electrostatic combdrive (STEC) high-aspect ratio micromachining process. The mirrors made using these two processes are evaluated for scan speed, optical resolution, ease of manufacture, and reliability. Micromachined Mirrors also presents an example application of surface-micromachined mirrors: a raster-scanning projection video display. This demonstration shows the advantages of micromachined mirrors (small high-speed scanners) with special attention paid to the major drawback of surface-micromachined mirrors (lower resolution due to dynamic deformation). The successful demonstration of this simple prototype video display helps clarify the importance of the critical performance characteristics to consider when designing micromachined mirrors.
Название: Micromachines as tools for nanotechnology ISBN: 3642624650 ISBN-13(EAN): 9783642624650 Издательство: Springer Рейтинг: Цена: 19591.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Addresses the use of MEMS (micro-electro-mechanical systems) and micromachined devices for the investigation of nanoscience and technology, as well as biotechnology.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
