High Temperature Alloys for Gas Turbines 1982, R. Brunetaud; D. Coutsouradis; T.B. Gibbons; Y. Li
Автор: Jiann-Yang Hwang; Tao Jiang; Mark William Kennedy; Название: 8th International Symposium on High-Temperature Metallurgical Processing ISBN: 3319513397 ISBN-13(EAN): 9783319513393 Издательство: Springer Рейтинг: Цена: 34937.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This collection features contributions covering the advances and developments of new high-temperature metallurgical technologies and their applications to the areas of: processing of minerals;
Автор: G.W. Meetham; M.H. Van de Voorde Название: Materials for High Temperature Engineering Applications ISBN: 3642631096 ISBN-13(EAN): 9783642631092 Издательство: Springer Рейтинг: Цена: 11101.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This concise survey describes the requirements on materials operating in high-temperature environments and the processes that increase the temperature capability of metals, ceramics, and composites. The major part deals with the applicable materials and their specific properties, with one entire chapter devoted to coatings.
Автор: R. Brunetaud; D. Coutsouradis; T.B. Gibbons; Y. Li Название: High Temperature Alloys for Gas Turbines 1982 ISBN: 9027714681 ISBN-13(EAN): 9789027714688 Издательство: Springer Рейтинг: Цена: 69738.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Proceedings of a Conference held in Liege, Belgium, 4-6 October 1982
Автор: J.B. Marriott; M. Merz; J. Nihoul; Ian M. Ward Название: High Temperature Alloys ISBN: 9401070997 ISBN-13(EAN): 9789401070997 Издательство: Springer Рейтинг: Цена: 16979.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Following a key-note paper concerning the relation of current capabilities to requirements for gas turbines the conference was structured into 3 sessions which examined: * the theoretical?ldpracticallimits for HT Alloys, * the potential for development in alloys and processing, * engineering considerations.
Описание: Metals and alloys rely for their application at high temperature on the formation and retention of oxide scales, which act as a barrier between the metallic substrate and the reactive species in the environment such as 0, S, N, C, Cl, etc.
Автор: Jiann-Yang Hwang; Tao Jiang; Chris Pistorius; Gera Название: 7th International Symposium on High-Temperature Metallurgical Processing ISBN: 3319486179 ISBN-13(EAN): 9783319486178 Издательство: Springer Рейтинг: Цена: 30606.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Flash Reduction of Magnetite and Hematite Concentrates with Hydrogen in a Lab-Scale Reactor for a Novel Ironmaking Process.- Investigation of Coal Tar Pitch Binder for the Production of Formed Coal Briquettes for COREX from High Volatile Coal Powder.- Upgrading of Iron-Rich Titanium Minerals Using a Molten Salt Process.- Direct Electrolytic Production of Mo-Si-Ti-C Composites from Their Oxides/Sulfide/Carbon Mixture Precursor in Molten Salt.- Reduction Kinetics of Magnetite Concentrate Particles with H2 + CO at 1200 to 1600 C Relevant to a Novel Ironmaking Process.- Advanced Oxygen Lances for Safer Furnace Tapping Operations.- Utilization of Pine Nut Shell for Preparation of High Surface Area Activated Carbon by Microwave Heating and KOH Activation.- Research on High Temperature Mechanical Properties of 50Cr5MoV Roll Steel.- Separation of Rhenium and Molybdenum from Molybdenite Concentrate by Microwave-Assisted Roasting.- Active Oxidation and Fume Formation from Liquid SiMn.- Research on Enrichment of MFe and RO Phase from Converter Steel Slag by Super Gravity.- Volatilization of Rhenium from Molybdenite Concentrate by Oxidative Roasting.- Kinetic Investigation of the Electric Furnace Copper Slag Treatment.- The Extraction of Zinc from Willemite by Calcified-Roasting and Ammonia-Leaching Process Based on Phase Reconstruction.- An Investigation on Antimony Production by Using Niederschlag Process.- Oxygen-Rich Side Blow Bath Smelting Technology - New Developments in China.- Carbon Refractories in an Oxidizing Process? Copper Smelting in an Outotec(R) Ausmelt TSL Furnace with a UCAR(R) ChillKote(TM) Refractory System.- Enrichment of Gold in Low Grade Copper Matte from Arsenical Refractory Gold Concentrate via Matte Smelting Method.- Zinc and Refractories - A Nasty Relation.- Preliminary Study on Preparation of Al-Sc Master Alloy in Na3AlF6-K3AlF6-AlF3 Melt.- Effect of the Reductants on the Production of Iron Based Alloys from Mill Scale by Metallothermic Process.- Experimental Study on Iron-Based Alloy as Cladding Layer-Improving High Temperature Oxidation Resistance of Furnace Alloy.- Production of FeMn Alloys with Heat Treated Mn-Nodules.- Thermodynamic Analysis and Experiments on Vacuum Separation of Sn-Sb Alloy.- Simulation of Solidification Microstructure of 30Cr2Ni4MoV Steel Ingot under Different Intensities of Mechanical Oscillation.- Production of ZrB2-B4C Composite Materials via SHS Process.- Research on Microwave Roasting of ZnO and Application in Photocatalysis.- Reduction Kinetics of Hematite Concentrate Particles by CO+H2 Mixture Relevant to a Novel Flash Ironmaking Process.- SO3 Formation in Copper Smelting Process: Thermodynamic Consideration.- Effect of Oxidation on Wetting Behavior between Silicon and Silicon Carbide.- Effect of CaO/SiO2 and P2O5 on the Viscosity of FeO-SiO2-V2O3-CaO-P2O5 Slags.- Heat Losses to Furnace Coolers as a Function of Process Intensity.- Viscosity of Partially Crystallized BOF Slag.- Origin and Evolution of Non-Metallic Inclusions for Al-Killed Steel during EAF-LF-VD-CC Process.- The Dynamic Dissolution of Coke with Slag in Melting and Dropping Zone.- Research on Oxidation Kinetics of SPHC Steel at 500 900 C.- Experiment Research on Direct Reduction of Celestine by Rotary Hearth Furnace Process.- Influence of Slag Basicity on the Silicon Within the Stainless Steel Master Alloy Prepared by Smelting Reduction of Fe-Ni-Cr Sinters.- Reduction Behavior of Chromic Oxide in Ti-Bearing BF Slag.- Effects of Mineral Oxides on the Precipitation Micro-Morphology of Metallic Iron in the Reduction of Iron Oxides Under CO Atmosphere.- Influence of Operation Parameters on Mass Fraction of Sulfur in the Hot Metal in COREX Process.- Influence of Operation Parameters on Sticking Behavior of Pellets in CO
Автор: Tao Jiang; Jiann-Yang Hwang; Gerardo Alvear; Onura Название: 6th International Symposium on High-Temperature Metallurgical Processing ISBN: 3319486039 ISBN-13(EAN): 9783319486031 Издательство: Springer Рейтинг: Цена: 30606.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
General Introduction.- LSP Numerical Simulation.- Laser Shock Processing at Elevated Temperature.- Influence of LSP on Stress Intensity Factor of Hole-edge Crack.- Conversion Model of Graphite.
Автор: David John Young Название: High Temperature Oxidation and Corrosion of Metals ISBN: 0081001010 ISBN-13(EAN): 9780081001011 Издательство: Elsevier Science Рейтинг: Цена: 26107.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
High Temperature Oxidation and Corrosion of Metals, Second Edition, provides a high level understanding of the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry, and alloy composition.
The book focuses on the design and selection of alloy compositions which provide optimal resistance to attack by corrosive gases, providing a rigorous treatment of the thermodynamics and kinetics underlying high temperature alloy corrosion.
In addition, it emphasizes quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities, and alloy compositions. Users will find this book to be an indispensable source of information for researchers and students who are dealing with high temperature corrosion.
Автор: Birks Название: Introduction to the high temperature oxidation of metals ISBN: 0521485177 ISBN-13(EAN): 9780521485173 Издательство: Cambridge Academ Рейтинг: Цена: 11246.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: A straightforward treatment describing the oxidation processes of metals and alloys at elevated temperatures. This 2006 second edition retains the fundamental theory and applies it to reactions in mixed environments and protective techniques. This book is a comprehensive guide to material scientists and engineers requiring an understanding of this elementary process.
General Introduction.- LSP Numerical Simulation.- Laser Shock Processing at Elevated Temperature.- Influence of LSP on Stress Intensity Factor of Hole-edge Crack.- Conversion Model of Graphite.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
