Описание: This book presents studies on the inelastic behavior of materials and structures under monotonic and cyclic loads. The various models are based on different approaches and methods and scaling aspects are taken into account. In addition to purely phenomenological models, the book also presents mechanisms-based approaches.
Описание: A component will not be reliable unless it is designed with required reliability. Reliability-Based Mechanical Design uses the reliability to link all design parameters of a component together to form a limit state function for mechanical design. This design methodology uses the reliability to replace the factor of safety as a measure of the safe status of a component. The goal of this methodology is to design a mechanical component with required reliability and at the same time, quantitatively indicates the failure percentage of the component. Reliability-Based Mechanical Design consists of two separate books: Volume 1: Component under Static Load , and Volume 2: Component under Cyclic Load and Dimension Design with Required Reliability . This book is Reliability-Based Mechanical Design, Volume 2: Component under Cyclic Load and Dimension Design with Required Reliability . It begins with a systematic description of a cyclic load. Then, the books use two probabilistic fatigue theories to establish the limit state function of a component under cyclic load, and further to present how to calculate the reliability of a component under a cyclic loading spectrum. Finally, the book presents how to conduct dimension design of typical components such as bar, pin, shaft, beam under static load, or cyclic loading spectrum with required reliability. Now, the designed component will be reliable because it has been designed with the required reliability. The book presents many examples for each topic and provides a wide selection of exercise problems at the end of each chapter. This book is written as a textbook for senior mechanical engineering students after they study the course Design of Machine Elements or a similar course. This book is also a good reference for design engineers and presents design methods in such sufficient detail that those methods are readily used in the design.
Описание: This book examines the mechanical response of granular and cohesive soils under cyclic loading, offering theoretical and analytical tools to evaluate settling under environmentally induced loads such as wave motion, wind action and varying water table levels.
A component will not be reliable unless it is designed with required reliability.
Reliability-Based Mechanical Design uses the reliability to link all design parameters of a component together to form a limit state function for mechanical design. This design methodology uses the reliability to replace the factor of safety as a measure of the safe status of a component. The goal of this methodology is to design a mechanical component with required reliability and at the same time, quantitatively indicates the failure percentage of the component. Reliability-Based Mechanical Design consists of two separate books: Volume 1: Component under Static Load, and Volume 2: Component under Cyclic Load and Dimension Design with Required Reliability.
This book is Reliability-Based Mechanical Design, Volume 2: Component under Cyclic Load and Dimension Design with Required Reliability. It begins with a systematic description of a cyclic load. Then, the books use two probabilistic fatigue theories to establish the limit state function of a component under cyclic load, and further to present how to calculate the reliability of a component under a cyclic loading spectrum. Finally, the book presents how to conduct dimension design of typical components such as bar, pin, shaft, beam under static load, or cyclic loading spectrum with required reliability.
Now, the designed component will be reliable because it has been designed with the required reliability. The book presents many examples for each topic and provides a wide selection of exercise problems at the end of each chapter. This book is written as a textbook for senior mechanical engineering students after they study the course Design of Machine Elements or a similar course. This book is also a good reference for design engineers and presents design methods in such sufficient detail that those methods are readily used in the design.
Автор: Iosif Vulfson Название: Dynamics of Cyclic Machines ISBN: 3319126334 ISBN-13(EAN): 9783319126333 Издательство: Springer Рейтинг: Цена: 22203.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book focuses on the methods of dynamic analysis and synthesis of machines, comprising of cyclic action mechanisms, such as linkages, cams, steppers, etc.
Автор: E.R. Semlyen Название: Cyclic Polymers ISBN: 9401083541 ISBN-13(EAN): 9789401083546 Издательство: Springer Рейтинг: Цена: 15672.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Synthetic polymers based on long chain molecules have been investigated intensively for over 50 years. In time, large ring molecules should take their proper place alongside long chain molecules as one of the two possible constituent structural units of polymers.
Автор: Wojciech Bo?ejko; Grzegorz Bocewicz Название: Modelling and Performance Analysis of Cyclic Systems ISBN: 3030276511 ISBN-13(EAN): 9783030276515 Издательство: Springer Рейтинг: Цена: 13974.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Striking a balance between state-of-the-art research and practical applications, this book provides a forum for contributions that cover the main research challenges in the cyclic modeling, development, and validation of concurrently acting distributed production systems: systems that employ multi-assortment production in large quantities, are characterized by gradual changes in their product mix, and exclusively manufacture products in a cyclic manner. Similar issues also arise in computer systems, e.g., embedded systems. Cyclic optimization problems that occur in them are unique and under-researched, but are attracting new interest primarily due to their great practical importance and the difficulty involved in obtaining efficient algorithms for solving specific cases with real constraints arising from manufacturing practice. Addressing these and other topics, the book will be of great interest to researchers in computer science, operations management, and production control, as well as practicing managers and engineers.
Автор: Iosif Vulfson Название: Dynamics of Cyclic Machines ISBN: 3319366297 ISBN-13(EAN): 9783319366296 Издательство: Springer Рейтинг: Цена: 18284.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book focuses on the methods of dynamic analysis and synthesis of machines, comprising of cyclic action mechanisms, such as linkages, cams, steppers, etc.
This book provides background and guidance on the use of the structural hot-spot stress approach to fatigue analysis. The book also offers Design S-N curves for use with the structural hot-spot stress for a range of weld details, and presents parametric formulas for calculating stress increases due to misalignment and structural discontinuities.
Highlighting the extension to structures fabricated from plates and non-tubular sections. The structural hot-spot stress approach focuses on cases of potential fatigue cracking from the weld toe and it has been in use for many years in tubular joints.
Following an explanation of the structural hot-spot stress, its definition and its relevance to fatigue, the book describes methods for its determination. It considers stress determination from both finite element analysis and strain gauge measurements, and emphasizes the use of finite element stress analysis, providing guidance on the choice of element type and size for use with either solid or shell elements. Lastly, it illustrates the use of the recommendations in four case studies involving the fatigue assessment of welded structures using the structural hot-spot stress
Автор: Raghu Prakash; Vikram Jayaram; Ashok Saxena Название: Advances in Structural Integrity ISBN: 9811356033 ISBN-13(EAN): 9789811356032 Издательство: Springer Рейтинг: Цена: 32004.00 р. Наличие на складе: Поставка под заказ.
Описание: This book includes selected technical papers presented at the First Structural Integrity Conference and Exhibition (SICE-2016). The papers, by eminent scientists and academicians working in the areas of structural integrity, life prediction, and condition monitoring, are classified under the domains of: aerospace, fracture mechanics, fatigue, creep-fatigue interactions, civil structures, experimental techniques, computation mechanics, polymer and metal matrix composites, life prediction, mechanical design, energy and transport, bio-engineering, structural health monitoring, nondestructive testing, failure analysis, materials processing, stress corrosion cracking, reliability and risk analysis. The contents of this volume will be useful to researchers, students and practicing engineers alike.
Описание: Drawing together the latest theoretical and experimental understanding of the phenomena of delayed hydride cracking (DHC) in zirconium alloys, this book provides a detailed explanation focusing on the properties of hydrogen and hydrides in these alloys.
Описание: This book presents studies on the inelastic behavior of materials and structures under monotonic and cyclic loads. The various models are based on different approaches and methods and scaling aspects are taken into account. In addition to purely phenomenological models, the book also presents mechanisms-based approaches.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
