Sensor Technologies For Civil Infrastructures, Wang, Ming L.
Автор: Wang, Ming L. Название: Sensor Technologies For Civil Infrastructures ISBN: 0081027060 ISBN-13(EAN): 9780081027066 Издательство: Elsevier Science Рейтинг: Цена: 42950.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Sensor Technologies for Civil Infrastructure, Volume 2: Applications in Structural Health Monitoring, Second Edition, provides an overview of sensor applications and a new section on future and emerging technologies. Part one is made up of case studies in assessing and monitoring specific structures such as bridges, towers, buildings, dams, tunnels, pipelines, and roads. The new edition also includes sensing solutions for assessing and monitoring of naval systems. Part two reviews emerging technologies for sensing and data analysis including diagnostic solutions for assessing and monitoring sensors, unmanned aerial systems, and UAV application in post-hazard event reconnaissance and site assessment.
Автор: T.D. Burchell Название: Carbon Materials for Advanced Technologies, ISBN: 0080426832 ISBN-13(EAN): 9780080426839 Издательство: Elsevier Science Рейтинг: Цена: 32844.00 р. Наличие на складе: Поставка под заказ.
Описание: Contains a review of carbon materials, and emphasizes the structure and chemical bonding in the various forms of carbon, including the four allotropes diamond, graphite, carbynes, and the fullerenes. This book discusses amorphous carbon and diamond films, carbon nanoparticles, and engineered carbons.
Автор: Vivek V. Ranade, Sanjay M Mahajani, Ganesh Arunkum Название: Computational Modeling of Underground Coal Gasification ISBN: 1138091596 ISBN-13(EAN): 9781138091597 Издательство: Taylor&Francis Рейтинг: Цена: 29093.00 р. Наличие на складе: Нет в наличии.
Описание: The book deals with development of comprehensive computational models for simulating underground coal gasification (UCG). It starts with an introduction to the UCG process and discuss known process models with relative merits and limitations of the modeling approaches are highlighted and compared.
Описание: This book presents the latest research advances and findings in the field of smart/multifunctional concretes, focusing on the principles, design and fabrication, test and characterization, performance and mechanism, and their applications in infrastructures.
Описание: This book presents the latest research advances and findings in the field of smart/multifunctional concretes, focusing on the principles, design and fabrication, test and characterization, performance and mechanism, and their applications in infrastructures.
Описание: Provides everything readers need to know for applying the power of informatics to materials science There is a tremendous interest in materials informatics and application of data mining to materials science. This book is a one-stop guide to the latest advances in these emerging fields. Bridging the gap between materials science and informatics, it introduces readers to up-to-date data mining and machine learning methods. It also provides an overview of state-of-the-art software and tools. Case studies illustrate the power of materials informatics in guiding the experimental discovery of new materials. Materials Informatics: Methods, Tools and Applications is presented in two parts?Methodological Aspects of Materials Informatics and Practical Aspects and Applications. The first part focuses on developments in software, databases, and high-throughput computational activities. Chapter topics include open quantum materials databases; the ICSD database; open crystallography databases; and more. The second addresses the latest developments in data mining and machine learning for materials science. Its chapters cover genetic algorithms and crystal structure prediction; MQSPR modeling in materials informatics; prediction of materials properties; amongst others. -Bridges the gap between materials science and informatics -Covers all the known methodologies and applications of materials informatics -Presents case studies that illustrate the power of materials informatics in guiding the experimental quest for new materials -Examines the state-of-the-art software and tools being used today Materials Informatics: Methods, Tools and Applications is a must-have resource for materials scientists, chemists, and engineers interested in the methods of materials informatics.
Описание: This book covers state-of-the-art technologies, principles, methods and industrial applications of electronic waste (e-waste) and waste PCB (WPCB) recycling. It focuses on cutting-edge mechanical separation processes and pyro- and hydro-metallurgical treatment methods. De-soldering, selective dismantling, and dry separation methods (including the use of gravity, magnetic and electrostatic techniques) are discussed in detail, noting the patents related to each.
The volume discusses the available industrial equipment and plant flowsheets used for WPCB recycling in detail, while addressing potential future directions of the field. This practical, comprehensive, and multidisciplinary reference will appeal to professionals throughout global industrial, academic and government institutions interested in addressing the growing problem of e-waste. Covers principles, methods and industrial applications of e-waste and PCB recycling;Details state-of-the-art mechanical separation processes and pyro- and hydro-metallurgical treatment methods; Describes the available industrial equipment used and plant flowsheets for PCB recycling and addresses potential future developments of this important field.
Автор: Simona Francese Название: Emerging Technologies for the Analysis of Forensic Traces ISBN: 303020541X ISBN-13(EAN): 9783030205416 Издательство: Springer Рейтинг: Цена: 16769.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book provides a line of communication between academia and end users/practitioners to advance forensic science and boost its contribution to criminal investigations and court cases. By covering the state of the art of promising technologies for the analysis of trace evidence using a controlled vocabulary, this book targets the forensics community as well as, crucially, informing the end users on novel and potential forensic opportunities for the fight against crime. By reporting end users commentaries at the end of each chapter, the relevant academic community is provided with clear indications on where to direct further technological developments in order to meet the law requirements for operational deployment, as well as the specific needs of the end users. Promising chemistry based technologies and analytical techniques as well as techniques that have already shown to various degrees an operational character are covered. The majority of the techniques covered have imaging capabilities, that is the ability to visualize the distribution of the target molecules within the trace evidence recovered. This feature enhances intelligibility of the information making it also accessible to a lay audience such as that typically found with a court jury. Trace evidence discussed in this book include fingermarks, bodily fluids, hair, gunshot residues, soil, ink and questioned documents thus covering a wide range of possible evidence recovered at crime scenes.
Автор: Echempati, Raghu Название: Primer on Automotive Lightweighting Technologies ISBN: 0815357133 ISBN-13(EAN): 9780815357131 Издательство: Taylor&Francis Рейтинг: Цена: 12554.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book introduces basic ideas and principles of designing engineering components with aluminum. Topics include application of the knowledge to understand how automotive body and structures are designed, as well as other major and smaller automotive components, such as engine blocks and its components, chassis systems, and wheels.
Автор: Tilli, Markku Название: Handbook Of Silicon Based Mems Materials And Technologies 3 ed. ISBN: 0128177861 ISBN-13(EAN): 9780128177860 Издательство: Elsevier Science Рейтинг: Цена: 39582.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Handbook of Silicon Based MEMS Materials and Technologies, Third Edition is a comprehensive guide to MEMS materials, technologies and manufacturing that examines the state-of-the-art, with a particular emphasis on silicon as the most important starting material used in MEMS. The book explains the fundamentals, properties (mechanical, electrostatic, optical, etc.), materials selection, preparation, manufacturing, processing, system integration, measurement, materials characterization techniques, sensors, and multiscale modeling methods of MEMS structures, silicon crystals and wafers, also covering micromachining technologies in MEMS and encapsulation of MEMS components.
This new edition provides coverage of innovative 3D packaging technologies and process knowledge for silicon direct bonding, anodic bonding, glass frit bonding, and related techniques, shows how to protect devices from the environment, and provides tactics to decrease package size for a dramatic reduction in costs. The new edition includes coverage of new processing techniques, emerging water bonding techniques, and reliability that were not included in the previous edition. A new section on process integration features numerous case studies, showing how MEMS technology is being used in industry.
Автор: Jianguo Wang, Yuan Junjie Название: Polymer Synthesis: Methods and Technologies ISBN: 3110596342 ISBN-13(EAN): 9783110596342 Издательство: Walter de Gruyter Рейтинг: Цена: 12822.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
The book systematically presents fundamental principles, properties, implementation methodologies, technologies and applications of polymer synthesis. Ring opening metathesis polymerization, click chemistry, macromolecular self-assembly, carbon nanomaterials and their modification with polymers are discussed in detail. With abundant illustrations, it is an essential reference for polymer chemists, material scientists, and graduate students.
Автор: Gunjan Jeswani, Marcel Voorde Название: Ethics in Nanotechnology: Emerging Technologies Aspects ISBN: 3110701812 ISBN-13(EAN): 9783110701814 Издательство: Walter de Gruyter Рейтинг: Цена: 28814.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
With nanotechnology being a relatively new field, the questions regarding safety and ethics are steadily increasing with the development of the research. This book aims to give an overview on the ethics associated with employing nanoscience for products with everyday applications. The risks as well as the regulations are discussed, and an outlook for the future of nanoscience on a manufacturer’s scale and for the society is provided.
Ethics in nanotechnology is a valuable resource for, philosophers, academicians and scientist, as well as all other industry professionals and researchers who interact with emerging social and philosophical ethical issues on routine bases. It is especially for deep learners who are enthusiastic to apprehend the challenges related to nanotechnology and ethics in philosophical and social education.
This book presents an overview of new and emerging nanotechnologies and their societal and ethical implications. It is meant for students, academics, scientists, engineers, policy makers, ethicist, philosophers and all stakeholders involved in the development and use of nanotechnology.???
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
