Автор: George Z Voyiadjis; Pawel Woelke Название: Elasto-Plastic and Damage Analysis of Plates and Shells ISBN: 3642098223 ISBN-13(EAN): 9783642098222 Издательство: Springer Рейтинг: Цена: 18284.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book presents a finite element model for the elasto-plastic and damage analysis of thin and thick shells. It investigates linear elastic, inelastic and softening behaviors caused by damage in structural shells, as well as large rotations.
Описание: This thesis proposes novel designs of phononic crystal plates (PhPs) allowing ultra-wide controllability frequency ranges of guided waves at low frequencies, with promising structural and tunability characteristics. It reports on topology optimization of bi-material-layered (1D) PhPs allowing maximized relative bandgap width (RBW) at target filling fractions and demonstrates multiscale functionality of gradient PhPs. It also introduces a multi-objective topology optimization method for 2D porous PhPs allowing both maximized RBW and in-plane stiffness and addresses the critical role of considering stiffness in designing porous PhPs. The multi-objective topology optimization method is then expanded for designing 2D porous PhPs with deformation induced tunability. A variety of innovative designs are introduced which their maximized broadband RBW is enhanced by, is degraded by or is insensitive to external finite deformation. Not only does this book address the challenges of new topology optimization methods for computational design of phononic crystals; yet, it demonstrated the suitability and applicability of the topological designs by experimental validation. Furthermore, it offers a comprehensive review of the existing optimization-based approaches for the design of finite non-periodic acoustic metamaterial structures, acoustic metamaterial lattice structures and acoustic metamaterials under perfect periodicity.
Описание: The book touches upon all aspects of electroless nickel, from the fundamentals (including thermodynamics of electroless plating, bath chemistry and substrate preparation) to applied areas like bath replenishment, composite coatings, post-treatments, polyalloys, graded and multilayer coatings, ultrasound assistance, applications, and properties.
Автор: A.C. Tan Название: Tin and Solder Plating in the Semiconductor Industry ISBN: 0412482401 ISBN-13(EAN): 9780412482403 Издательство: Springer Рейтинг: Цена: 28734.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Provides coverage of the theory and practice of plating semiconductor devices. This book introduces the principal concepts of plating and discusses its practice. It is designed to help electroplaters achieve `zero-defect` plating by providing an understanding of the plating chemistry and the handling of the plated parts.
Автор: Goharian, Amirhossein Название: Trauma Plating Systems ISBN: 0128046341 ISBN-13(EAN): 9780128046340 Издательство: Elsevier Science Рейтинг: Цена: 21222.00 р. Наличие на складе: Поставка под заказ.
Описание:
Trauma Plating Systems is the first reference and systematic book in the topic of trauma plating system in view of biomechanical, material, biological, and clinical aspects. The effects of these aspects on effectiveness of trauma plating fixation are deeply reviewed, discussed, and challenged from which promising evaluation and development concepts are explored.
This book is divided into five sections: Section I covers general concepts of biomechanical, material, biological, and clinical aspects. Then it provides fundamentals of trauma plating systems, principles of biomechanical evaluation methods, and biomechanics of plating fixation in Section II. Section III reviews current metallic materials with their advantages and disadvantages in plating fixation of bone fractures and new promising materials with their potential benefits to enhance the effectiveness of plating fixation. Section IV represents currently concerned biomechanical-clinical challenges of plating fixation for various bone fractures, and Section V presents current and new development concepts of this type of trauma implants. This book as an accessible and easy usable textbook for various disciplines of audiences who are dealing with trauma plating system and fixation such as orthopedic surgeons, trauma implant manufacturers, biomechanical researchers, biomaterial researchers, and all biomedical or medical students and residents in different levels of education.
Author has been diligent in both engineering and research environments in terms of research, testing, analysis, validation, verification, clinical studies, and technical writing. His main interest and effort is to integrate biomechanical, material, biological, and clinical requirements of orthopedic implants for creation of novel design conception in this industry. He has developed the website http: //orthoimplant-development.com/ for further communication in development of orthopedic implants.
Smooth writing style for effective following, fast reading, and easy accessibility of the content
Detailed and insight reviews, discussions, and new ideas in evaluation methods and design conception
Disclosing of a novel conceptual plating system (Advance Healing Fixation System--AHealFS) with advanced biomechanical and clinical benefits in various stages of healing period potential to bring an interesting science breakthrough in fixation of bone fractures
Автор: Shen Hui-Shen Название: Postbuckling Behavior Of Plates And Shells ISBN: 9813146990 ISBN-13(EAN): 9789813146990 Издательство: World Scientific Publishing Рейтинг: Цена: 34848.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
As an expert in structure and stress analysis, the author has written extensively on functionally graded materials (FGMs), nonlinear vibration and dynamic response of functionally graded material plates in thermal environments, buckling and postbuckling analysis of single-walled carbon nanotubes in thermal environments. This book provides a comprehensive overview of the author's works which include significant contributions to the postbuckling behavior of plates and shells under different loading and environmental conditions.
This book comprises eight chapters. Each chapter contains adequate introductory material so that an engineering graduate who is familiar with basic understanding of plates and shells will be able to follow it.
Chapter 1 introduces higher order shear deformation plate theory and the derivation of the nonlinear equations of shear deformable plates in the von K rm n sense.
Chapter 2, covers the postbuckling behavior of thin plates due to in-plane compressive loads or temperature variation.
Chapter 3 presents analytical solutions of moderately thick isotropic plates without or resting on elastic foundations.
Chapter 4 furnishes a detailed treatment of the postbuckling problems of shear deformable laminated plates subjected to thermal, electrical, and mechanical loads.
Chapter 5 put forward a concepts of boundary layer theory for shell buckling and isotropic cylindrical shells.
Chapter 6 extends this novel theory to the cases of anisotropic laminated cylindrical thin shells.
Chapter 7 presents postbuckling analysis of shear deformable laminated cylindrical shells under the framework of boundary layer theory.
Chapter 8 deals with postbuckling behavior of laminated cylindrical panels under various loading conditions.
This thesis proposes novel designs of phononic crystal plates (PhPs) allowing ultra-wide controllability frequency ranges of guided waves at low frequencies, with promising structural and tunability characteristics. It reports on topology optimization of bi-material-layered (1D) PhPs allowing maximized relative bandgap width (RBW) at target filling fractions and demonstrates multiscale functionality of gradient PhPs. It also introduces a multi-objective topology optimization method for 2D porous PhPs allowing both maximized RBW and in-plane stiffness and addresses the critical role of considering stiffness in designing porous PhPs. The multi-objective topology optimization method is then expanded for designing 2D porous PhPs with deformation induced tunability. A variety of innovative designs are introduced which their maximized broadband RBW is enhanced by, is degraded by or is insensitive to external finite deformation. Not only does this book address the challenges of new topology optimization methods for computational design of phononic crystals; yet, it demonstrated the suitability and applicability of the topological designs by experimental validation. Furthermore, it offers a comprehensive review of the existing optimization-based approaches for the design of finite non-periodic acoustic metamaterial structures, acoustic metamaterial lattice structures and acoustic metamaterials under perfect periodicity.
Автор: Abbas Elzein Название: Plate Stability by Boundary Element Method ISBN: 3540537104 ISBN-13(EAN): 9783540537106 Издательство: Springer Рейтинг: Цена: 18167.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This text serves both as an introduction to the subject of the boundary element method and as a survey and exploration of current techniques in the field. Following an examination of the basic principles of the method, the book describes plate stability theory and its applications.
Автор: Reinhold Kienzler; Holm Altenbach; Ingrid Ott Название: Theories of Plates and Shells ISBN: 364205904X ISBN-13(EAN): 9783642059049 Издательство: Springer Рейтинг: Цена: 19589.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Plate and shell theories experienced a renaissance in recent years. In the present book the contributions of the participants of the EUROMECH Colloquium 444 "Critical Review of the Theories of Plates and Shells and New Applications" have been collected.
Автор: Snehashish Chakraverty Название: Vibration of Functionally Graded Beams and Plates ISBN: 0128042281 ISBN-13(EAN): 9780128042281 Издательство: Elsevier Science Рейтинг: Цена: 19875.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Vibration of Functionally Graded Beams and Plates uses numerically efficient computational techniques to analyze vibration problems associated with FG beams and plates. Introductory material on FG materials and structural members, as well as a range of vibration and shear deformation theories are discussed, providing a valuable summary of these broader themes.
The latest research and analysis of vibration in FG materials is presented in an application-oriented manner, linking the research to its importance in fields such as aerospace, nuclear power, and automotive engineering.
The book also features research on the complicating effects of thermal environments, piezoelectricity, and elastic foundations. The innovative computational procedures and simulation results are shown in full throughout, providing a uniquely valuable resource for users of numerical modeling software.
This book is essential reading for any researcher or practitioner interested in FG materials, or the design of technology for the nuclear power, aerospace, and automotive industries.
Автор: Sergey D. Algazin,Igor A. Kijko Название: Aeroelastic vibrations and stability of plates and shells ISBN: 311033836X ISBN-13(EAN): 9783110338362 Издательство: Walter de Gruyter Цена: 33463.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Back-action of aerodynamics onto structures such as wings cause vibrations and may resonantly couple to them, thus causing instabilities (flutter) and endangering the whole structure. By careful choices of geometry, materials and damping mechanisms, hazardous effects on wind engines, planes, turbines and cars can be avoided. Besides an introduction into the problem of flutter, new formulations of flutter problems are given as well as a treatise of supersonic flutter and of a whole range of mechanical effects. Numerical and analytical methods to study them are developed and applied to the analysis of new classes of flutter problems for plates and shallow shells of arbitrary plane form. Specific problems discussed in the book in the context of numerical simulations are supplemented by Fortran code examples (available on the website).
Автор: Tuncer Cebeci; Max Platzer; Hsun Chen; Kuo-cheng C Название: Analysis of Low-Speed Unsteady Airfoil Flows ISBN: 3642444962 ISBN-13(EAN): 9783642444968 Издательство: Springer Рейтинг: Цена: 19559.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Furthermore, certain "steady" flows are inherently unsteady in the presence of flow separation, as for example the unsteady flow caused by the Karman vortex shedding downstream of a cylin der and "static" airfoil stall which is an inherently unsteady flow phenomenon.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
