Описание: This is the proceedings of the 2nd International Conference on Theoretical, Applied and Experimental Mechanics that was held in Corfu, Greece, June 23-26, 2019.It presents papers focusing on all aspects of theoretical, applied and experimental mechanics, including biomechanics, composite materials, computational mechanics, constitutive modeling of materials, dynamics, elasticity, experimental mechanics, fracture, mechanical properties of materials, micromechanics, nanomechanics, plasticity, stress analysis, structures, wave propagation.The papers update the latest research in their field, carried out since the last conference in 2018. This book is suitable for engineers, students and researchers who want to obtain an up-to-date view of the recent advances in the area of mechanics.
Influence of Sample Preparation on Determined Nanomechanical Properties of Metastable Calcium Carbonate Polymorphs.- Crystallization and Dissolution of Common Salts - Damage Potential to Porous Media.- Torsional shear testing of mortar.- Comparative tests of strengthening effects on weak mortars consolidated with various agents.- Novel Device for 4-point Flexural Testing of Quasi-brittle Materials during 4D Computed Tomography.- Effects of Long-term Aging on the Low-cycle Fatigue Behavior of Inconel 718 superalloy.- Enhanced Young's modulus in percolative cementitious composites reinforced with carbon nanotubes.- Behavior of Partially and Fully FRP-Confined Circularized Square Columns (CSCs) under Axial Compression.- Stress-Strain Behavior of Circular Concrete Columns Partially Wrapped with FRP Strips.- Improving the Tribological Properties of Ti6Al4V Alloy with Multi-Walled Carbon Nanotube Additions.
Описание: ICTAEM_1 treated all aspects of theoretical, applied and experimental mechanics including biomechanics, composite materials, computational mechanics, constitutive modeling of materials, dynamics, elasticity, experimental mechanics, fracture, mechanical properties of materials, micromechanics, nanomechanics, plasticity, stress analysis, structures, wave propagation. During the conference special symposia covering major areas of research activity organized by members of the Scientific Advisory Board took place. ICTAEM_1 brought together the most outstanding world leaders and gave attendees the opportunity to get acquainted with the latest developments in the area of mechanics. ICTAEM_1 is a forum of university, industry and government interaction and serves in the exchange of ideas in an area of utmost scientific and technological importance.
Описание: Advance Books is a publisher of children bilingual books containing side-by-side Filipino and English text. Sophia and Alex 10-book series is intended to help bilingual children reach higher levels of creativity, curiosity, cognition, social awareness and emotional well-being, all conducive in preparation for subsequent language immersion programs.
Описание: Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2018 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Characterization Across Length ScalesExtreme Environments & Environmental EffectsSoft MaterialsDamage, fatigue and FractureInhomogeneities & InterfacesViscoelasticityResearch in Progress
Описание: Mechanics of Biological Systems & Micro-and Nanomechanics, Volume 4 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of eight from the Conference, brings together contributions to important areas of research and engineering. The collection presents early findings and case studies on a wide range of topics, including:Cell Mechanics & Traumatic Brain InjuryMicromechanical TestingAdhesion and FractureMEMS Devices and TechnologyNano-scale Deformation Mechanisms1D & 2D MaterialsTribology & WearResearch and Applications in Progress
Описание: Micro-and Nanomechanics, Volume 5 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fifth volume of ten from the Conference, brings together contributions to this important area of research and engineering.
Описание: Experimental and Applied Mechanics, Volume 4 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of ten from the Conference, brings together contributions to important areas of research and engineering.
Описание: 1 A General Mathematical Model to Retrieve Displacement Information from Fringe Patterns.- 2 Full-Field High-Strain Evaluation from Wrapped ESPI Data Using Phasors.- 3 Dynamic Deformation with Static Load.- 4 Full-field Digital Holographic Vibrometry for Characterization of High-speed MEMS.- 5 DD DIC A Parallel Finite Element Based Digital Image Correlation Solver.- 6 Thermal Strain Measurement Using Digital Image Correlation with Systematic Error Elimination.- 7 Investigating the Tensile Response of Materials at High Temperature Using DIC.- 8 Hybrid Stereocorrelation for 3D Thermomechanical Field Measurements.- 9 Experimental Characterization of the Mechanical Properties of 3D Printed ABS and Polycarbonate Parts.- 10 Experimental Determination of Transfer Length in Pre-Stressed Concrete Using 3D-DIC.- 11 Hybrid Infrared Image Correlation Technique to Deformation Measurement of Composites.- 12 DIC Anisotropic Denoising Based on Uncertainty.- 13 An Applications-Oriented Measurement System Analysis of 3D Digital Image Correlation.- 14 Preliminary study on Determination Pointing-Knowledge of Camera-Pair Used for 3D DIC.- 15 Elimination of Periodical Error for Bi-directional Displacement in Digital Image Correlation Method.- 16 The Cluster Approach Applied to Multi-Camera 3D DIC system.- 17 Self-Adaptive Isogeometric Global Digital Image Correlation and Digital Height Correlation.- 18 Ultrasonic Test for High Rate Material Property Imaging.- 19 Analysis of Dynamic Bending Using DIC and Virtual Fields Method.- 20 The Virtual Fields Method to Rubbers Under Medium Strain Rates.- 21 Inertial Impact Tests on Polymers for Inverse Parameter Identification.- 22 Full-field Identification Methods: Comparison of FEM Updating and Integrated DIC.- 23 Finite Element Stereo Digital Image Correlation Measure for Plate Model.- 24 Opportunities for Inverse Analysis in Dynamic Tensile Testing.- 25 Determination of the Dynamic Strain Hardening Parameters From Acceleration Fields.- 26 Imaged-based Inertial Impact Tests on an Aluminium Alloy.- 27 Inverse Material Characterization from 360-deg DIC Measurements on Steel Samples.- 28 Identification of Plastic Behaviour and Formability Limits of Aluminium Alloys at High Temperature.
Описание: The 16thInternational Symposium on MEMS and Nanotechnology, Volume 5 of the Proceedings of the 2015SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the fifth volume of nine from the Conference, brings together contributions to this important area of research and engineering.
Описание: 1 Atomistic Simulation of a Two-Dimensional Polymer Tougher Than Graphene.- 2 Transverse Compression Response of Ultra-high Molecular Weight Polyethylene Single Fibers.- 3 Morphology and Mechanics of the Young Minipig Cranium.- 4 Dynamic Characterization of Nitronic 30, 40 and 50 Series Stainless Steels by Numerical Analysis.- 5 Mechanical Response of T800/F3900 Composite at Various Strain Rates.- 6 Full-Field Temperature and Strain Measurement in Dynamic Tension Tests on SS 304.- 7 Dynamic Fracture Response of a Synthetic Cortical Bone Simulant.- 8 Fracture Response of Cross-Linked Epoxy Resins at High Loading Rate as a Function of Glass Transition Temperature.- 9 Measurement of Dynamic Response Parameters of an Underdamped System.- 10 Dynamic Penetration and Bifurcation of a Crack at an Interface in a Transparent Bi-Layer: Effect of Impact Velocity.- 11 Influence of Loading Rate Effects Fracture Strength of Individual Sand Particles.- 11 Arrested Compression Tests on two Types of Sand.- 12 Composite Plate Response to Shock Wave Loading.- 13 Initial Experimental Validation of an Eulerian Method for Modeling Composites.- 14 Characterization of High Strain Rate Dependency of 3D CFRP materials.- 15 High-strain Rate Compressive Behavior of a Clay under Uniaxial Strain State.- 16 Mesoscopic Modelling of High Performance Fiber Reinforced Concrete under Dynamic Loading.- 17 Comparison of Failure Mechanisms due to Shock Propagation in Forged, Layered, and Additive Manufactured Titanium Alloy.- 18 Instrumented Penetration of Metal Alloys during High-Velocity Impacts.- 19 Confined Underwater Implosions using 3D Digital Image Correlation.- 20 Response of Composite Cylinders Subjected to Near Field Underwater Explosions._ 21 Microstructural Effects on the Spall Properties of Al 5083: Equal-Channel Angular Extrusion (ECAE) plus Cold Rolling.- 23 Experimental Study of the Dynamic Fragmentation in Transparent Ceramic Subjected to Projectile Impact.- 24 Instrumented Projector for Dynamic Testing.- 25 NIST Mini-Kolsky Bar: Historical Review.- 26 A General Approach to Evaluate the Dynamic Fracture Toughness of Materials.- 27 Which one has More Influence on Fracture Strength of Ceramics: Pressure or Strain Rate?.- 28 Dynamic Strength and Fragmentation Experiments on Brittle Materials Using Theta-specimens.- 29 DTEM in situ Mechanical Testing: Defects Motion at High Strain Rates.- 30 High-Strain-Rate Deformation of Ti-6Al-4V through Compression Kolsky Bar at High Temperatures.- 31 Parametric Study of the Formation of Cone Cracks in Brittle Materials.- 32 Shockless Characterization of Ceramics.- 33 Dynamic Hyper Elastic Behavior of Compression Shock Loaded Vibration Dampers.- 34 Specimen Size Effect on Stress-Strain Response of Foams Under Direct-Impact.- 35 Texture Evolution of Fine-grained Mg Alloy at Dynamic Strain Rates.- Failure Processes Governing High Rate Impact Resistance of Epoxy Resins Filled with Core Shell Rubber Nanoparticles.- 37 Ballistic Response of Polydicyclopentadiene vs. Epoxy Resins and Effects of Crosslinking.
Описание: Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 7 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of ten from the Conference, brings together contributions to this important area of research and engineering.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
