Experimental and Applied Mechanics, Volume 4: Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics, Sciammarella Cesar, Considine John, Gloeckner Paul
Описание: Dynamic Behavior of Materials, Volume 1 represents the first of nine volumes of technical papers presented at the Society for Experimental Mechanics SEM 15th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 8-11, 2015.
Описание: The 16thInternational Symposium on MEMS and Nanotechnology, Volume 5 of the Proceedings of the 2015SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the fifth volume of nine from the Conference, brings together contributions to this important area of research and engineering.
Influence of Sample Preparation on Determined Nanomechanical Properties of Metastable Calcium Carbonate Polymorphs.- Crystallization and Dissolution of Common Salts - Damage Potential to Porous Media.- Torsional shear testing of mortar.- Comparative tests of strengthening effects on weak mortars consolidated with various agents.- Novel Device for 4-point Flexural Testing of Quasi-brittle Materials during 4D Computed Tomography.- Effects of Long-term Aging on the Low-cycle Fatigue Behavior of Inconel 718 superalloy.- Enhanced Young's modulus in percolative cementitious composites reinforced with carbon nanotubes.- Behavior of Partially and Fully FRP-Confined Circularized Square Columns (CSCs) under Axial Compression.- Stress-Strain Behavior of Circular Concrete Columns Partially Wrapped with FRP Strips.- Improving the Tribological Properties of Ti6Al4V Alloy with Multi-Walled Carbon Nanotube Additions.
Описание: Reflection-mode Digital Gradient Sensing Technique for Experimental Fracture Mechanics.- Experimental and Computational Investigation of Out-of-Plane low Velocity Impact Behaviour of CFRP Composite Plates.- Prediction of Incipient Nano-scale Rupture for Thermosets in Plane Stress.- Effect of Degree of Cure on Damage Development in FRP.- Stochastic Discrete Damage Simulations of Laminate Composites.- Development of a Specimen for in-situ Diffraction Planar Biaxial Experiments.- V-Notched Rail Test for Shear-dominated Deformation of Ti-6Al-4V.- A statistical/computational/experimental Approach to Study the Microstructual Morphology of Damage.- Prediction of Ductile Fracture Through Small-size Notched Tensile Specimens.- Development of a Generalized Entropic Framework for Damage Assessment.- Modelling of Experimental Observations of Electrical Response of CNT Composites.- Effect of Micro-cracks on the Thermal Conductivity of Particulate Nanocomposite.- Fatigue Tests on Fiber Coated Titanium Implant- Bone Cement Interfaces.- Fatigue Behavior of Carburized Steel at Long Lives.- Fatigue Behavior of Fluid End Crossbore Using a Coupon-based Approach.- Fatigue in FCC Polycrystalline Metals - Numerical and Experimental Study.- Notch Strain Analysis of Crossbore Geometry.- Keynote: Opto-acoustic and Neutron Emissions from Fracture and Earthquakes.- Field Theoretical Description of Shear Bands.- Measuring the Effective Fracture Toughness of Heterogeneous Materials.- Fatigue Testing and Local Strain Analysis of Nitinol Devices.- Environmental Protection by the Opto-acoustic and Neutron Emission Seismic Precursors.- Neutron Emissions From Hydrodynamic Cavitation.- From Dark Matter to Brittle Fracture.- Compositional Variations in Palladium Electrodes Exposed to Electrolysis.- Strain-rate-dependent Yield Criteria for Composite Laminates.- Experimental Fatigue Specimen and Finite Element Analysis for Characterization of Dental Composites.- Fracture Toughness and Impact Damage Resistance of Nanoreinforced Carbon/Epoxy Composites.- Compression Testing of Micro-scale Unidirectional Polymer Matrix Composites.- Crack Analysis of Wood Under Climate Variations.- Numerical Fracture Analysis Under Temperature Variations by Energetic Method.- Use of a Multiplexed Photonic Doppler Velocimetry (MPDV) System to Study Plastic Deformation of Metallic Steel Plates in High Velocity Impact.- In-Service Preload Monitoring of Bolted Joints Subjected to Fatigue Loading using a Novel 'MoniTorque' Bolt.- Fatigue Behavior of Novel Hybrid Fastening System With Adhesive Inserts.
Описание: 1 Fatigue Damage Precursor Identification Using Nondestructive Evaluation Coupled with Electron Microscopy.- 2 Experimental Fracture Analysis of Tropical Species Using the Grid Method.- 3 Investigating the Effective Fracture Toughness of Heterogeneous Materials.- 4 Improved Hybrid Specimen for Vibration Bending Fatigue.- 5 Experimental Study of Residual Plastic Strain and Damages Development in Carbon Fiber Composite.- 6 Experimental Investigation of Strength of Curved Beam by Thin Ply Non Crimp Fabric Laminates.- 7 Role of Laminate Thickness on Sequential Dynamic Delamination of Curved [90/0] CFRP Composite Laminates.- 8 Application of eMMC Model to Fracture of Metal Sheets.- 9 Hydrolytic Degradation and its Effect on Mechanical Properties of HFPE II 52 Polyimide Preliminary Results.- 10 Mixed Mode and Mode II Fatigue Crack Growth in Woven Composites.- 11 Characterization of Fatigue Induced Damage Evolution in CFRPs Using DIC.- 12 Damage Characterization for Electronic Components Under Impact Loading.- 13 Dynamic Mode II Delamination in Through Thickness Reinforced Composites.- 14 Measurement of Bond Line Fracture Toughness in Adhesively Bonded Composite Structures by Nanoindentation.- 15 Experimental and Numerical Investigation of Novel Crack Stopper Concepts for Lightweight Foam Cored Sandwich Structures.- 16 Probabilistic Improvement of Crack Propagation Monitoring by Using Acoustic Emission.- 17 Failure Detection of Temporary Structures with Digital Image Correlation for Construction Safety Applications.- 18 Using Digital Image Correlation to Detect Cracking in Opalinus Shale.- 19 Early Detection Of Damage Mechanisms In Composites During Fatigue Tests.- 20 Implementing Noise Multi Frequency Stimulus and Realtime Analysis with Nonlinear Model Tracking.
Описание: From the Contents: Effect of Crystallite Orientation on Nanomechanical Properties of a Nanostructured poly(KAMPS)/aragonite Composite.- Characterization of the Mechanical Behavior of Sunflower Stem for Bio-composite Applications.- Long-range Mechanical Force Enables Self-assembly of Epithelial Tubules.- Effects of Membrane Composition and Cytoskeletal Proteins on Membrane Mechanics.- Interfacial Fracture Toughness of Nacre.- New Insight into the Toughening Mechanisms of Nacre.- Thermal Analyses of Dental Ceramic Restorations.- Visualization of Micro-cracks in Compact Bovine Bone.- KEYNOTE: Humanlike Robots - Synthetically Mimicking Humans.- Porous Hydroxyapatite-polyhydroxybutyrate Composites Fabricated by a Novel Method via Centrifugation.- Isolation of Collagen From Cortical Bovine Bone for Preparation of Porous Collagen Sponges.
Описание: Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 7 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of ten from the Conference, brings together contributions to this important area of research and engineering.
Описание: 1 Atomistic Simulation of a Two-Dimensional Polymer Tougher Than Graphene.- 2 Transverse Compression Response of Ultra-high Molecular Weight Polyethylene Single Fibers.- 3 Morphology and Mechanics of the Young Minipig Cranium.- 4 Dynamic Characterization of Nitronic 30, 40 and 50 Series Stainless Steels by Numerical Analysis.- 5 Mechanical Response of T800/F3900 Composite at Various Strain Rates.- 6 Full-Field Temperature and Strain Measurement in Dynamic Tension Tests on SS 304.- 7 Dynamic Fracture Response of a Synthetic Cortical Bone Simulant.- 8 Fracture Response of Cross-Linked Epoxy Resins at High Loading Rate as a Function of Glass Transition Temperature.- 9 Measurement of Dynamic Response Parameters of an Underdamped System.- 10 Dynamic Penetration and Bifurcation of a Crack at an Interface in a Transparent Bi-Layer: Effect of Impact Velocity.- 11 Influence of Loading Rate Effects Fracture Strength of Individual Sand Particles.- 11 Arrested Compression Tests on two Types of Sand.- 12 Composite Plate Response to Shock Wave Loading.- 13 Initial Experimental Validation of an Eulerian Method for Modeling Composites.- 14 Characterization of High Strain Rate Dependency of 3D CFRP materials.- 15 High-strain Rate Compressive Behavior of a Clay under Uniaxial Strain State.- 16 Mesoscopic Modelling of High Performance Fiber Reinforced Concrete under Dynamic Loading.- 17 Comparison of Failure Mechanisms due to Shock Propagation in Forged, Layered, and Additive Manufactured Titanium Alloy.- 18 Instrumented Penetration of Metal Alloys during High-Velocity Impacts.- 19 Confined Underwater Implosions using 3D Digital Image Correlation.- 20 Response of Composite Cylinders Subjected to Near Field Underwater Explosions._ 21 Microstructural Effects on the Spall Properties of Al 5083: Equal-Channel Angular Extrusion (ECAE) plus Cold Rolling.- 23 Experimental Study of the Dynamic Fragmentation in Transparent Ceramic Subjected to Projectile Impact.- 24 Instrumented Projector for Dynamic Testing.- 25 NIST Mini-Kolsky Bar: Historical Review.- 26 A General Approach to Evaluate the Dynamic Fracture Toughness of Materials.- 27 Which one has More Influence on Fracture Strength of Ceramics: Pressure or Strain Rate?.- 28 Dynamic Strength and Fragmentation Experiments on Brittle Materials Using Theta-specimens.- 29 DTEM in situ Mechanical Testing: Defects Motion at High Strain Rates.- 30 High-Strain-Rate Deformation of Ti-6Al-4V through Compression Kolsky Bar at High Temperatures.- 31 Parametric Study of the Formation of Cone Cracks in Brittle Materials.- 32 Shockless Characterization of Ceramics.- 33 Dynamic Hyper Elastic Behavior of Compression Shock Loaded Vibration Dampers.- 34 Specimen Size Effect on Stress-Strain Response of Foams Under Direct-Impact.- 35 Texture Evolution of Fine-grained Mg Alloy at Dynamic Strain Rates.- Failure Processes Governing High Rate Impact Resistance of Epoxy Resins Filled with Core Shell Rubber Nanoparticles.- 37 Ballistic Response of Polydicyclopentadiene vs. Epoxy Resins and Effects of Crosslinking.
Описание: Experimental and Applied Mechanics, Volume 4 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of ten from the Conference, brings together contributions to important areas of research and engineering.
Описание: Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2018 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Characterization Across Length ScalesExtreme Environments & Environmental EffectsSoft MaterialsDamage, fatigue and FractureInhomogeneities & InterfacesViscoelasticityResearch in Progress
Описание: Micro-and Nanomechanics, Volume 5 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fifth volume of ten from the Conference, brings together contributions to this important area of research and engineering.
Описание: Mechanics of Biological Systems and Materials, Volume 6 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of ten from the Conference, brings together contributions to this important area of research and engineering.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
