Challenges in Mechanics of Time Dependent Materials, Volume 2: Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics, Silberstein Meredith, Amirkhizi Alireza
Описание: Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2018 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Characterization Across Length ScalesExtreme Environments & Environmental EffectsSoft MaterialsDamage, fatigue and FractureInhomogeneities & InterfacesViscoelasticityResearch in Progress
Описание: 1 Cracking and Durability of Composites in a Marine Environment.- 2 Analyses of Nanoscale to Microscale Strength and Crack-tip Stresses Using Nanomechanical Raman Spectroscopy in In 617.- 3 High Creep Resistance of Titanium Aluminides Sintered by SPS.- 4 An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers.- 5 Keynote Life Prediction of CFRP Laminates based on Accelerated Testing Methodology.- 6 Rate Dependent Interfacial Properties Using the JKR Experimental Technique.- 7 Bio-based Composites as Thermorheologically Complex Materials.- 8 Viscoelastic Properties of Longitudinal Waves in a Hollow Cylinder.- 9 Evaluation of Viscoelastic Characteristics Under High Strain Rate by Impact Test.- 10 Phase Changes in Embedded HMX in Response to Periodic Mechanical Excitation.- 11 Effect of Crystal Density on Dynamic Deformation Behavior of PBX.- 12 Strain Rate Dependent Failure of Interfaces Examined via Nanoimpact Experiments.- 13 A Theory of Coupled Anisothermal Chemomechanical Degradation for Finitely-deforming Composite Materials with Eshelbian Interactive Forces.- 14 Effect Of Temperature And Moisture on the Mechanical Properties of Fiber Reinforced Nylon 6 Composites.- 15 Using Hydrostatic Pressure to Maximize Frequency Dependent Damping Properties of Thermoplastic Polyurethane.- 16 Impact Of Hydro-Mechanical Loadings On Rupture Process In Wood Material.- 17 2D Transient Viscoplastic Model for Dislocation Generation of SiC by PVT Method.- 18 Temperature-Dependent Small Strain Plasticity Behavior of 304L Stainless Steel.- 19 Time and Temperature Creep Behaviour Measurement of Al and Al-Mg Alloy Thin Films Using Pressure Bulge Tests.- 20 Multifunctional Wings with Flexible Batteries and Solar Cells for Robotic Birds.- 21 Rate-Dependent Constitutive Model Development of PC/ABS Material.- 22 Comprehensive Viscoelastic Properties Characterization of EMC Using FBG Sensor.- 23 Back Stress in Modeling the Response of PEEK and PC.- 24 Dynamic Testing and Constitutive Modelling of NBR Rubbers.- 25 A New Temperature-dependent Storage Modulus Model of Epoxy Resin.- 26 Identification of Plastic Behaviour of Sheet Metals in High Strain Rate Tests.- 27 Characterization of Fiber Composites at Lower Strain Rates.
Описание: Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2020 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the first volume of seven from the Conference, brings together contributions to this important area of research and engineering.
Описание: Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 7 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of ten from the Conference, brings together contributions to this important area of research and engineering.
Описание: Mechanics of Biological Systems and Materials, Volume 6 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of ten from the Conference, brings together contributions to this important area of research and engineering.
Описание: 1 Atomistic Simulation of a Two-Dimensional Polymer Tougher Than Graphene.- 2 Transverse Compression Response of Ultra-high Molecular Weight Polyethylene Single Fibers.- 3 Morphology and Mechanics of the Young Minipig Cranium.- 4 Dynamic Characterization of Nitronic 30, 40 and 50 Series Stainless Steels by Numerical Analysis.- 5 Mechanical Response of T800/F3900 Composite at Various Strain Rates.- 6 Full-Field Temperature and Strain Measurement in Dynamic Tension Tests on SS 304.- 7 Dynamic Fracture Response of a Synthetic Cortical Bone Simulant.- 8 Fracture Response of Cross-Linked Epoxy Resins at High Loading Rate as a Function of Glass Transition Temperature.- 9 Measurement of Dynamic Response Parameters of an Underdamped System.- 10 Dynamic Penetration and Bifurcation of a Crack at an Interface in a Transparent Bi-Layer: Effect of Impact Velocity.- 11 Influence of Loading Rate Effects Fracture Strength of Individual Sand Particles.- 11 Arrested Compression Tests on two Types of Sand.- 12 Composite Plate Response to Shock Wave Loading.- 13 Initial Experimental Validation of an Eulerian Method for Modeling Composites.- 14 Characterization of High Strain Rate Dependency of 3D CFRP materials.- 15 High-strain Rate Compressive Behavior of a Clay under Uniaxial Strain State.- 16 Mesoscopic Modelling of High Performance Fiber Reinforced Concrete under Dynamic Loading.- 17 Comparison of Failure Mechanisms due to Shock Propagation in Forged, Layered, and Additive Manufactured Titanium Alloy.- 18 Instrumented Penetration of Metal Alloys during High-Velocity Impacts.- 19 Confined Underwater Implosions using 3D Digital Image Correlation.- 20 Response of Composite Cylinders Subjected to Near Field Underwater Explosions._ 21 Microstructural Effects on the Spall Properties of Al 5083: Equal-Channel Angular Extrusion (ECAE) plus Cold Rolling.- 23 Experimental Study of the Dynamic Fragmentation in Transparent Ceramic Subjected to Projectile Impact.- 24 Instrumented Projector for Dynamic Testing.- 25 NIST Mini-Kolsky Bar: Historical Review.- 26 A General Approach to Evaluate the Dynamic Fracture Toughness of Materials.- 27 Which one has More Influence on Fracture Strength of Ceramics: Pressure or Strain Rate?.- 28 Dynamic Strength and Fragmentation Experiments on Brittle Materials Using Theta-specimens.- 29 DTEM in situ Mechanical Testing: Defects Motion at High Strain Rates.- 30 High-Strain-Rate Deformation of Ti-6Al-4V through Compression Kolsky Bar at High Temperatures.- 31 Parametric Study of the Formation of Cone Cracks in Brittle Materials.- 32 Shockless Characterization of Ceramics.- 33 Dynamic Hyper Elastic Behavior of Compression Shock Loaded Vibration Dampers.- 34 Specimen Size Effect on Stress-Strain Response of Foams Under Direct-Impact.- 35 Texture Evolution of Fine-grained Mg Alloy at Dynamic Strain Rates.- Failure Processes Governing High Rate Impact Resistance of Epoxy Resins Filled with Core Shell Rubber Nanoparticles.- 37 Ballistic Response of Polydicyclopentadiene vs. Epoxy Resins and Effects of Crosslinking.
Описание: From the Contents: Effect of Crystallite Orientation on Nanomechanical Properties of a Nanostructured poly(KAMPS)/aragonite Composite.- Characterization of the Mechanical Behavior of Sunflower Stem for Bio-composite Applications.- Long-range Mechanical Force Enables Self-assembly of Epithelial Tubules.- Effects of Membrane Composition and Cytoskeletal Proteins on Membrane Mechanics.- Interfacial Fracture Toughness of Nacre.- New Insight into the Toughening Mechanisms of Nacre.- Thermal Analyses of Dental Ceramic Restorations.- Visualization of Micro-cracks in Compact Bovine Bone.- KEYNOTE: Humanlike Robots - Synthetically Mimicking Humans.- Porous Hydroxyapatite-polyhydroxybutyrate Composites Fabricated by a Novel Method via Centrifugation.- Isolation of Collagen From Cortical Bovine Bone for Preparation of Porous Collagen Sponges.
Описание: Dynamic Behavior of Materials, Volume 1 represents the first of nine volumes of technical papers presented at the Society for Experimental Mechanics SEM 15th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 8-11, 2015.
Описание: Featuring research on topics such as low energy buildings` concepts, construction materials and technology, hybrid energy systems, energy balance, and wellbeing, this book meets the expectations of academicians, specialists and researchers in the field, along with the scholars seeking coverage on buildings, environmental and human impact.
Описание: Experimental and Applied Mechanics, Volume 4 of the Proceedings of the 2015SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the fourth volume of nine from the Conference, brings together contributions to important areas of research and engineering.
Описание: Mechanics of Biological Systems & Micro-and Nanomechanics, Volume 4 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of eight from the Conference, brings together contributions to important areas of research and engineering. The collection presents early findings and case studies on a wide range of topics, including:Cell Mechanics & Traumatic Brain InjuryMicromechanical TestingAdhesion and FractureMEMS Devices and TechnologyNano-scale Deformation Mechanisms1D & 2D MaterialsTribology & WearResearch and Applications in Progress
Описание: Experimental and Applied Mechanics, Volume 4 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of ten from the Conference, brings together contributions to important areas of research and engineering.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
