Proceedings of the 2nd International Conference on Experimental and Computational Mechanics in Engineering: Icecme 2020, Banda Aceh, October 13-14, Akhyar
Описание: This book is a collection of research papers selected for presentation at the International Conference on Smart Computational Methods in Continuum Mechanics 2021, organized by Moscow Institute of Physics and Technology and the Institute for Computer Aided Design of Russian Academy of Sciences.
Описание: This book is a collection of research papers selected for presentation at the International Conference on Smart Computational Methods in Continuum Mechanics 2021, organized by Moscow Institute of Physics and Technology and the Institute for Computer Aided Design of Russian Academy of Sciences.
Описание: This book discusses physical and mathematical models, numerical methods, computational algorithms and software complexes, which allow high-precision mathematical modeling in fluid, gas, and plasma mechanics;
Описание: Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2020 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of seven from the Conference, brings together contributions to this important area of research and engineering.
Описание: Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 4 of the Proceedings of the 2020 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together contributions to this important area of research and engineering.
Описание: Featuring research on topics such as low energy buildings` concepts, construction materials and technology, hybrid energy systems, energy balance, and wellbeing, this book meets the expectations of academicians, specialists and researchers in the field, along with the scholars seeking coverage on buildings, environmental and human impact.
Описание: Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2020 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of seven from the Conference, brings together contributions to this important area of research and engineering.
Описание: Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2020 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the first volume of seven from the Conference, brings together contributions to this important area of research and engineering.
Описание: Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 4 of the Proceedings of the 2020 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of seven from the Conference, brings together contributions to this important area of research and engineering.
Описание: This is the proceedings of the 2nd International Conference on Theoretical, Applied and Experimental Mechanics that was held in Corfu, Greece, June 23-26, 2019.It presents papers focusing on all aspects of theoretical, applied and experimental mechanics, including biomechanics, composite materials, computational mechanics, constitutive modeling of materials, dynamics, elasticity, experimental mechanics, fracture, mechanical properties of materials, micromechanics, nanomechanics, plasticity, stress analysis, structures, wave propagation.The papers update the latest research in their field, carried out since the last conference in 2018. This book is suitable for engineers, students and researchers who want to obtain an up-to-date view of the recent advances in the area of mechanics.
Описание: Materials: Properties, Manufacturing, Modelling.- Role of Compactness on Hardness and Reduced Modulus of Vaterite Determined with Nanoindentation, by Radek Sevčнk and Vladimнr Hrbek.- Approximate mode shape for damped structures, by Wasiu A. Oke, Oluseyi A. Adeyemi, Kazeem A. Bello, Adewale Adegbenjo.- Deformation Behavior of Ferrite/austenite Duplex Stainless Steel in Hot Compression Processing, by Hezong Li, Suxia Huang, Qiusheng Li, Xiaopin An, Facai Ren and Simon S. Wang.- Material strength degradation experiment and statistical expression under cyclic loading, by Liyang Xie, Hongyi Ma and Guoliang Xu.- Study of Effect of Phase Separation on Pores Orientation of Electrospun Nanofibre, by S. O. Alayande, E. O. Dare, J.N. Edokpayi, Adeyemi, O.A., Adewale Adegbenjo, T.A.M. Msagati.- Deformation Model of [45]s Cross-Ply Fiber Reinforced Plastics Under Tension, by V.N.Paimushin, R.A.Kayumov, D.V.Tarlakovskii and S.A.Kholmogorov.- Segregation resistance, stiffness and toughness of CNT nanomodified self compacted concrete, by Myrsini Maglogianni, Panagiotis Danoglidis, Maria Falara and Maria S. Konsta-Gdoutos.- High Temperature Creep Properties of Cast Cobalt-Based Superalloys: A Comparison, by Marie Kvapilova, Vaclav Sklenicka, Petr Kral, and Jiri Dvorak.- Sub-grain plastic strain localization in CoCrNi medium entropy alloy at cryogenic temperatures, by Wael Abuzaid and Luca Patriarca.- Effects of Treatment on Microstructure and Deformation Behavior of Dissimilar Welded Joint Between Single Crystal and Polycrystalline Superalloy, by Yang Liu, Lei Wang, Xiu Song, Taosha Liang and Guo Hua.- Improved post-crack energy absorption capability of cementitious composites reinforced with CNTs and PPs, by Panagiotis A. Danoglidis, Maria S. Konsta-Gdoutos and Emmanuel E. Gdoutos.- Molecular Dynamics Investigation of Dislocation Slip in Pure Metals and Alloys, by Alexander E. Mayer and Vasiliy S. Krasnikov.- Development and validation of 3D DIC based residual stress testing method, by Tomasz Brynk.- Monogenic Filtering based Automatic Defect Detection from A Single Fringe Pattern, by Rishikesh Kulkarni and Pramod Rastogi.- Enhanced post-crack load carrying capacity of nano and micro scale carbon fiber reinforced mortars, by Maria G. Falara, Maria S. Konsta-Gdoutos and Emmanuel E. Gdoutos.- Two-point Bending Stress Determination of Ultra-thin Glass Plates, by Po-Chi Sung, Wei-Chung Wang, and Yu-Wei Kuo.- Investigation of Grating Collimation of Coherent Gradient Sensing Technique, by Po-Yu Chen, Wei-Chung Wang.- The Mechanism of Grain Boundary in Hydrogen Embrittlement of Inconel 690 Alloy, by Lei Wang, Yang Liu, Cheng He and Xiu Song.- Determining Object Motion by Digital Image Correlation Method with Camera-Array Composed Cameras of Normal Frame Rate, by Chi-Hung Hwang, Tzu-Yu Kuo, Wei-Chung Wang.- Fracture.- Configurational stability of a crack propagating in mixed-mode I+II+III, by Jean-Baptiste Leblond, Alain Karma, Laurent Ponson and Aditya Vasudevan.- Limiting equilibrium of interfacial shear cracks at the corner point of the media-separating boundary of the piece-homogeneous isotropic plane, by V.M. Nazarenko and A.L. Kipnis.- An approach to analysis of fracture of semi-bounded body under compressing along interfacial near-surface crack, by V.L. Bogdanov and A.L. Kipnis.- Fracture of composite material at compression along near-surface crack, by Mykhailo Dovzhyk, Vyacheslav Bogdanov and Vladimir Nazarenko.- Statistical Distribution of Pores in Solid and Molten Metals at Dynamic Tensile Fracture, by Polina N. Mayer and Alexander E. Mayer.- Fatigue and Deformation of Light Magnesium Alloys, by Daolun Chen.- Miscellaneous (Biomechanics, Computational mechanics, Dynamics, Nanomechanics, Plasticity, Structures, Wave propagation.- Research on Contact Pressure of Friction Pair Based on Finite Element Method, by Changlu Wang, Long Wu, Zichun Xu, Yaping Zhang, Hao Gao, Yanzhong Wang.- Noise and Vibration Analysis
Описание: Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 6 of the Proceedings of the 2020 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of seven from the Conference, brings together contributions to this important area of research and engineering.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
