Machining and Machinability of Fiber Reinforced Polymer Composites, Hameed Sultan Mohamed Thariq, Azmi Azwan Iskandar, Majid Mohd Shukry Abd
Автор: Kaushik Kumar, Nisha Kumari, J. Paulo Davim Название: Non-Conventional Machining in Modern Manufacturing Systems ISBN: 1522561617 ISBN-13(EAN): 9781522561613 Издательство: Mare Nostrum (Eurospan) Рейтинг: Цена: 31324.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Provides research exploring the theoretical and practical aspects of technological advancements in industrial environments and applications in manufacturing. The book features coverage on a broad range of topics such as optimization techniques, electrical discharge machining, and hot machining.
Автор: Hameed Sultan Mohamed Thariq, Azmi Azwan Iskandar, Majid Mohd Shukry Abd Название: Machining and Machinability of Fiber Reinforced Polymer Composites ISBN: 9813341521 ISBN-13(EAN): 9789813341524 Издательство: Springer Цена: 22359.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book covers current advances and practices in machining fibre-reinforced polymer composites under various conventional and nonconventional processes.
Автор: J. Paulo Davim Название: Machinability of Fibre-Reinforced Plastics ISBN: 311029222X ISBN-13(EAN): 9783110292220 Издательство: Walter de Gruyter Цена: 26954.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Presents polymer-based fibre reinforced composite materials and addresses the characteristics of these widely used materials like low density and coefficient of thermal expansion, specific strength with better fatigue resistance and modulus. The topics discussed are laser-based material machining, high-speed robotic end milling and LFRP modeling, including definitions, features, machine elements (system set-up) as well as experimental and theoretical investigations. These investigations include effects of input variables (tool rotation speed, feed rate and ultrasonic power) on cutting force, torque, cutting temperature, edge quality, surface roughness, burning of machined surface, tool wear, material removal rate, power consumption and feasible regions. Further a detailed literature review on drilling polymer composites with a focus on delamination is included. Aspects such as delamination mechanisms, fabrication methods, the type of drilling process adopted by various researchers, cutting parameters employed during drilling, mathematical delamination modelling, effect of thrust force, spindle speed, thermal loads, tool wear, surface roughness, tool geometry and tool materials on delamination and hole quality are summarized. In addition an approach of digital image processing in delamination assessment completes the approach. - Discusses Carbon Fiber Reinforced Plastics modern technologies for automated, highly productive and cost efficient processing.- Great value for final undergraduate engineering courses or as a topic on manufacturing with FRPs at the postgraduate level as well as a useful reference for academics, researchers, manufacturing, mechanical and materials engineers, professionals in machining of FRPs and related industries.
Автор: Jamal Ahmad Название: Machining of Polymer Composites ISBN: 1441942041 ISBN-13(EAN): 9781441942043 Издательство: Springer Рейтинг: Цена: 16977.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: A reference and source book for process design, tool and production engineers in composite manufacturing. It provides the reader with a treatment of the theory of machining as it applies to fiber reinforced polymer composites.
Автор: Neelesh Kumar Jain; Kapil Gupta; Название: Spark Erosion Machining ISBN: 1498787932 ISBN-13(EAN): 9781498787932 Издательство: Taylor&Francis Рейтинг: Цена: 22968.00 р. Наличие на складе: Нет в наличии.
Описание: The book covers novel applications in spark erosion based machining processes, ranging from production of micro electro mechanical systems to machining of aerospace materials. The principle, methodology and mechanism of spark erosion-based machining processes and their hybrid versions are described.
Автор: J. Paulo Davim Название: Machining of Metal Matrix Composites ISBN: 1447160452 ISBN-13(EAN): 9781447160458 Издательство: Springer Рейтинг: Цена: 15672.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: With each chapter written by an international expert in this vital field of research, this volume provides readers with all the fundamentals and the latest advances in the study of machining of MMCs, with a special focus on aluminium matrix composites.
Описание: This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites.
Автор: Narendra B. Dahotre; Sandip Harimkar Название: Laser Fabrication and Machining of Materials ISBN: 1489973710 ISBN-13(EAN): 9781489973719 Издательство: Springer Рейтинг: Цена: 20896.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: With laser machining an emerging area in various applications ranging from bulk machining in metal forming to micromachining and microstructuring, this book provides a link between advanced materials and advanced manufacturing techniques.
Автор: Graham T. Smith Название: CNC Machining Technology ISBN: 3540198296 ISBN-13(EAN): 9783540198291 Издательство: Springer Рейтинг: Цена: 14365.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This is the second volume of three designed to give an insight into the current state of CNC technology with a focus on practical applications. Following a brief historical introduction to cutting tool development, chapters 1 and 2 explain why CNC requires a change in cutting tool technology from conventional methods.
Автор: Andreas W. Momber; Radovan Kovacevic Название: Principles of Abrasive Water Jet Machining ISBN: 1447115740 ISBN-13(EAN): 9781447115748 Издательство: Springer Рейтинг: Цена: 15672.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Abrasive water jet machining was introduced to manufacturing ten years ago and has been increasingly used for treating hard-to-machine and multi-layered materials and as an alternative tool for milling, turning, drilling and polishing.
Автор: Kumar Kaushik, Ranjan Chikesh, Davim J. Paulo Название: Cnc Programming for Machining ISBN: 3030412784 ISBN-13(EAN): 9783030412784 Издательство: Springer Рейтинг: Цена: 22359.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: The book is basically written with a view to project Computer Numerical Control Programming (CNC) Programming for machines. This book shows how to write, read and understand such programs for modernizating manufacturing machines.
Автор: Mills, B. Название: Machinability of engineering materials ISBN: 9400966334 ISBN-13(EAN): 9789400966338 Издательство: Springer Рейтинг: Цена: 12157.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: In the manufacturing industries, despite the development and improvement of metal forming processes, a great deal of reliance is still placed on metal cutting processes and this will continue into the foreseeable future.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
