Контакты/Проезд  Доставка и Оплата Помощь/Возврат
История
  +7(495) 980-12-10
  пн-пт: 10-18 сб,вс: 11-18
  shop@logobook.ru
   
    Поиск книг                    Поиск по списку ISBN Расширенный поиск    
Найти
  Зарубежные издательства Российские издательства  
Авторы | Каталог книг | Издательства | Новинки | Учебная литература | Акции | Хиты | |
 

Modelling Diesel Combustion, Lakshminarayanan


Варианты приобретения
Цена: 15372.00р.
Кол-во:
Наличие: Поставка под заказ.  Есть в наличии на складе поставщика.
Склад Америка: Есть  
При оформлении заказа до: 2025-09-29
Ориентировочная дата поставки: начало Ноября
При условии наличия книги у поставщика.

Добавить в корзину
в Мои желания

Автор: Lakshminarayanan
Название:  Modelling Diesel Combustion
ISBN: 9789811667442
Издательство: Springer
Классификация:


ISBN-10: 9811667446
Обложка/Формат: Soft cover
Страницы: 406
Вес: 0.65 кг.
Дата издания: 06.02.2023
Серия: Mechanical Engineering Series
Язык: English
Издание: 2nd ed. 2022
Иллюстрации: 47 illustrations, color; 224 illustrations, black and white; xxi, 406 p. 271 illus., 47 illus. in color.
Размер: 235 x 155
Читательская аудитория: Professional & vocational
Основная тема: Engineering
Ссылка на Издательство: Link
Рейтинг:
Поставляется из: Германии
Описание: This book comprehensively discusses diesel combustion phenomena like ignition delay, fuel-air mixing, rate of heat release, and emissions of smoke, particulate and nitric oxide. It enables quantitative evaluation of these important phenomena and parameters. Most importantly, it attempts to model them with constants that are independent of engine types and hence they could be applied by the engineers and researchers for a general engine. This book emphasizes the importance of the spray at the wall in precisely describing the heat release and emissions for most of the engines on and off-road. It gives models for heat release and emissions. Every model is thoroughly validated by detailed experiments using a broad range of engines. The book describes an elegant quasi-one-dimensional model for heat release in diesel engines with single as well as multiple injections. The book describes how the two aspects, namely, fuel injection rate and the diameter of the combustion bowl in the piston, have enabled meeting advanced emission, noise, and performance standards. The book also discusses the topics of computational fluid dynamics encompassing RANS and LES models of turbulence. Given the contents, this book will be useful for students, researchers and professionals working in the area of vehicle engineering and engine technology. This book will also be a good professional book for practising engineers in the field of combustion engines and automotive engineering.
Дополнительное описание: Introduction.- Phenomenology of diesel Combustion and modelling.- Experiments.- Turbulent Structure of the Diesel Spray.- Ignition Delay in a Diesel Engine.- Heat Transfer.- Heat Release in Indirect Injection engines.- Mixing Correlations for Smoke and Fu



Modelling Diesel Combustion

Автор: Lakshminarayanan P. A., Aghav Yogesh V.
Название: Modelling Diesel Combustion
ISBN: 9811667411 ISBN-13(EAN): 9789811667411
Издательство: Springer
Рейтинг:
Цена: 15372.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This book comprehensively discusses diesel combustion phenomena like ignition delay, fuel-air mixing, rate of heat release, and emissions of smoke, particulate and nitric oxide. It enables quantitative evaluation of these important phenomena and parameters. Most importantly, it attempts to model them with constants that are independent of engine types and hence they could be applied by the engineers and researchers for a general engine. This book emphasizes the importance of the spray at the wall in precisely describing the heat release and emissions for most of the engines on and off-road. It gives models for heat release and emissions. Every model is thoroughly validated by detailed experiments using a broad range of engines. The book describes an elegant quasi-one-dimensional model for heat release in diesel engines with single as well as multiple injections. The book describes how the two aspects, namely, fuel injection rate and the diameter of the combustion bowl in the piston, have enabled meeting advanced emission, noise, and performance standards. The book also discusses the topics of computational fluid dynamics encompassing RANS and LES models of turbulence. Given the contents, this book will be useful for students, researchers and professionals working in the area of vehicle engineering and engine technology. This book will also be a good professional book for practising engineers in the field of combustion engines and automotive engineering.

Combustion Engine Diagnosis

Автор: Rolf Isermann
Название: Combustion Engine Diagnosis
ISBN: 3662494663 ISBN-13(EAN): 9783662494660
Издательство: Springer
Рейтинг:
Цена: 19564.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: It then describes model-based methods of fault detection and diagnosis for the main components of gasoline and diesel engines, such as the intake system, fuel supply, fuel injection, combustion process, turbocharger, exhaust system and exhaust gas aftertreatment.

Combustion Engine Diagnosis

Автор: Rolf Isermann
Название: Combustion Engine Diagnosis
ISBN: 3662586193 ISBN-13(EAN): 9783662586198
Издательство: Springer
Рейтинг:
Цена: 15372.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: It then describes model-based methods of fault detection and diagnosis for the main components of gasoline and diesel engines, such as the intake system, fuel supply, fuel injection, combustion process, turbocharger, exhaust system and exhaust gas aftertreatment.

A Quasi-dimensional Charge Motion and Turbulence Model for Combustion and Emissions Prediction in Diesel Engines with a fully Variable Valve Train

Автор: Yang
Название: A Quasi-dimensional Charge Motion and Turbulence Model for Combustion and Emissions Prediction in Diesel Engines with a fully Variable Valve Train
ISBN: 3658357738 ISBN-13(EAN): 9783658357733
Издательство: Springer
Рейтинг:
Цена: 13974.00 р.
Наличие на складе: Нет в наличии.

Описание: Qirui Yang develops a model chain for the simulation of combustion and emissions of diesel engine with fully variable valve train (VVT) based on extensive 3D-CFD simulations, and experimental measurements on the engine test bench. The focus of the work is the development of a quasi-dimensional (QDM) flow model, which sets up a series of sub-models to describe phenomenologically the swirl, squish and axial charge motions as well as the shear-related turbulence production and dissipation. The QDM flow model is coupled with a QDM combustion model and a nitrogen oxides (NOx) / soot emission model. With the established model chain, VVT operating strategies of diesel engine can be developed and optimized as part of the simulation for specific engine performance parameters and the lowest NOx and soot emissions.

Modelling and Observation of Exhaust Gas Concentrations for Diesel Engine Control

Автор: Dr.-Ing. David Blanco-Rodriguez
Название: Modelling and Observation of Exhaust Gas Concentrations for Diesel Engine Control
ISBN: 331936118X ISBN-13(EAN): 9783319361185
Издательство: Springer
Рейтинг:
Цена: 13059.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: The book presents a complete new methodology for the on-board measurements and modeling of gas concentrations in turbocharged diesel engines.

Modelling and Observation of Exhaust Gas Concentrations for Diesel Engine Control

Автор: Dr.-Ing. David Blanco-Rodriguez
Название: Modelling and Observation of Exhaust Gas Concentrations for Diesel Engine Control
ISBN: 3319067362 ISBN-13(EAN): 9783319067360
Издательство: Springer
Рейтинг:
Цена: 15672.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: The book presents a complete new methodology for the on-board measurements and modeling of gas concentrations in turbocharged diesel engines.

9. Tagung Diesel- und Benzindirekteinspritzung 2014

Автор: Helmut Tsch?ke
Название: 9. Tagung Diesel- und Benzindirekteinspritzung 2014
ISBN: 3658076496 ISBN-13(EAN): 9783658076498
Издательство: Springer
Рейтинг:
Цена: 16979.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание:

Dieselmotoren: Bosch Diesel Fuel Injection System - The New Delphi Injector Family - Diesel Engine Potential by Hydraulic Tuning of the Denso Solenoid Injector - Simulation des hydraulischen Druckanstiegsanalysators zur Messung an CR-Injektoren - Bestimmung des Strahlimpulses aus der Strahlkraftmessung - Einblasecharakteristik von Gasinjektoren - Optische Untersuchungen zur Dieseleinspritzung - Effekte der Dьsengeometrie auf die Verbrennung - Das Liebherr Common Rail System - Applikation eines 1800 bar Einspritzsystems an einen Hatz Motor - Ablagerungen in CR-Injektoren - Performance Criteria for PC-CR Injectors with Focus on Emissions, Fuel Efficiency and Robustness

Ottomotoren: Challenges for the Gasoline DI-System - Magerbrennverfahren mit Mehrloch-Magnetventil - GDI Multi Hole Injector Spray Investigations - Wandwдrmeverluste bei strahlgefьhrten Verbrennungsverfahren - LIF-Messung der Kraftstoffwandbenetzung - Bewertung innermotorischer Wandfilme - Technologien fьr die GDI-Injektormontage und -prьfung - Gasoline Heated Fuel Injection-A Mechanism for Particulate Reduction - Hochfrequenz-Zьndung bei Otto-DI-Motoren - Partikeloptimale Benzindirekteinspritzung - Einfluss der Ethanolzumischung auf die ru ende DI-Verbrennung - Fuel Injection Control Technology

Diesel Engine Transient Operation

Автор: Constantine D. Rakopoulos; Evangelos G. Giakoumis
Название: Diesel Engine Transient Operation
ISBN: 1849968403 ISBN-13(EAN): 9781849968409
Издательство: Springer
Рейтинг:
Цена: 23508.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This is an in-depth and comprehensive analysis of the complex thermodynamic and dynamic phenomena experienced by a diesel engine during load increase, acceleration, cold starting or Transient Cycle, presenting the most important findings in the field.

Thermo- and Fluid Dynamic Processes in Diesel Engines 2

Автор: James H. Whitelaw; Francisco Payri; C. Arcoumanis;
Название: Thermo- and Fluid Dynamic Processes in Diesel Engines 2
ISBN: 3642057713 ISBN-13(EAN): 9783642057717
Издательство: Springer
Рейтинг:
Цена: 45712.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This is the second book edited with a selection of papers from the two-yearly THIESEL Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines, organised by CMT-Mvtores Termicos of the Universidad Po/itecnica de Valencia, Spain.

Thermo-and Fluid-dynamic Processes in Diesel Engines

Автор: James H.W. Whitelaw; Francisco Payri; Jose-Maria D
Название: Thermo-and Fluid-dynamic Processes in Diesel Engines
ISBN: 3540426655 ISBN-13(EAN): 9783540426653
Издательство: Springer
Рейтинг:
Цена: 28734.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: These papers address all aspects related to thermofluidynamic processses in diesel engines, from basic studies aiming to obtain a better understanding of the physical processes underlying diesel engine operation, to the real day-to-day problems associated with engine development.

Diesel Engines,

Автор: A J WHARTON
Название: Diesel Engines,
ISBN: 0750602171 ISBN-13(EAN): 9780750602174
Издательство: Elsevier Science
Рейтинг:
Цена: 3704.00 р.
Наличие на складе: Есть у поставщика Поставка под заказ.

Описание: This edition of an established book has become necessary to enable the marine engineer to keep abreast of new developments in the design and manufacture of marine diesel engines. It continues to meet the requirements of Marine Engineer Officers preparing for examinations.

Design and Development of Heavy Duty Diesel Engines

Автор: P. A. Lakshminarayanan; Avinash Kumar Agarwal
Название: Design and Development of Heavy Duty Diesel Engines
ISBN: 9811509697 ISBN-13(EAN): 9789811509698
Издательство: Springer
Рейтинг:
Цена: 30606.00 р.
Наличие на складе: Нет в наличии.

Описание: This book is intended to serve as a comprehensive reference on the design and development of diesel engines. It talks about combustion and gas exchange processes with important references to emissions and fuel consumption and descriptions of the design of various parts of an engine, its coolants and lubricants, and emission control and optimization techniques. Some of the topics covered are turbocharging and supercharging, noise and vibrational control, emission and combustion control, and the future of heavy duty diesel engines. This volume will be of interest to researchers and professionals working in this area.


ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
   В Контакте     В Контакте Мед  Мобильная версия