Автор: Megalooikonomou Konstantinos G. Название: Seismic Assessment and Retrofit of Reinforced Concrete Columns ISBN: 1527527859 ISBN-13(EAN): 9781527527850 Издательство: Cambridge Scholars Рейтинг: Цена: 13787.00 р. Наличие на складе: Нет в наличии.
Описание: Reinforced concrete columns play a very important role in structural performance. As such, it is essential to apply a suitable analytical tool to estimate their structural behaviour considering all failure mechanisms such as axial, shear, and flexural failures.
Автор: Lee, S.L. Название: Composite Steel Structures ISBN: 1851666427 ISBN-13(EAN): 9781851666423 Издательство: Taylor&Francis Рейтинг: Цена: 39811.00 р. Наличие на складе: Нет в наличии.
Автор: Chiew, Sing-ping (singapore Institute Of Technology) Cai, Yan-qing (nanyang Technological University, Singapore) Название: Design of high strength steel reinforced concrete columns ISBN: 0815384602 ISBN-13(EAN): 9780815384601 Издательство: Taylor&Francis Рейтинг: Цена: 9492.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
This book is the companion volume to Design Examples for High Strength Steel Reinforced Concrete Columns - A Eurocode 4 Approach.
Guidance is much needed on the design of high strength steel reinforced concrete (SRC) columns beyond the remit of Eurocode 4. Given the much narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete, there is a clear need for design beyond the guidelines. This book looks at the design of SRC columns using high strength concrete, high strength structural steel and high strength reinforcing steel materials - columns with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. The companion volumeprovides detailed worked examples on use of these high strength materials.
This book is written primarily for structural engineers and designers who are familiar with basic EC4 design, and should also be useful to civil engineering undergraduate and graduate students who are studying composite steel concrete design and construction. Equations for design resistances are presented clearly so that they can be easily programmed into design spreadsheets for ease of use.
Автор: Chiew, Sing-ping (singapore Institute Of Technology) Cai, Yan-qing (nanyang Technological University, Singapore) Название: Design examples for high strength steel reinforced concrete columns ISBN: 1138602698 ISBN-13(EAN): 9781138602694 Издательство: Taylor&Francis Рейтинг: Цена: 9492.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
This book is the companion volume to Design of High Strength Steel Reinforced Concrete Columns - A Eurocode 4 Approach.
This book provides a large number of worked examples for the design of high strength steel reinforced concrete (SRC) columns. It is based on the Eurocode 4 approach, but goes beyond this to give much needed guidance on the narrower range of permitted concrete and steel material strengths in comparison to EC2 and EC3, and the better ductility and buckling resistance of SRC columns compared to steel or reinforced concrete. Special considerations are given to resistance calculations that maximize the full strength of the materials, with concrete cylinder strength up to 90 N/mm2, yield strength of structural steel up to 690 N/mm2 and yield strength of reinforcing steel up to 600 N/mm2 respectively. These examples build on the design principles set out in the companion volume, allowing the readers to practice and understand the EC4 methodology easily.
Structural engineers and designers who are familiar with basic EC4 design should find these design examples particularly helpful, whilst engineering undergraduate and graduate students who are studying composite steel concrete design and construction should easily gain further understanding from working through the worked examples which are set out in a step-by-step clearly fashion.
Автор: Kar Chun Tan Название: Eurocode 2 Design Data for Reinforced Concrete Columns ISBN: 9811368406 ISBN-13(EAN): 9789811368400 Издательство: Springer Рейтинг: Цена: 23757.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book was written to facilitate column sizing and reinforcement design for structural engineers. These outputs can also benefit quantity surveyors, especially for costing purposes, and help avoid careless design errors. The book is chiefly intended for structural engineers who implement Eurocode 2 for reinforced concrete design.
Описание: This thesis studied the effect of aging of intumescent coatings (ICs) on the reliability of protected steel columns in fire condition and developed a probabilistic approach to assess the service life of ICs applied on steel columns.
Описание: This thesis studied the effect of aging of intumescent coatings (ICs) on the reliability of protected steel columns in fire condition and developed a probabilistic approach to assess the service life of ICs applied on steel columns.
Автор: Lin, Xiaoshan (lecturer, School Of Engineering Clu Название: Nonlinear finite element analysis of composite and reinforced concrete beams ISBN: 0128168994 ISBN-13(EAN): 9780128168998 Издательство: Elsevier Science Рейтинг: Цена: 19370.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Nonlinear Finite Element Analysis of Composite and Reinforced Concrete Beams presents advanced methods and techniques for the analysis of composite and FRP reinforced concrete beams. The title introduces detailed numerical modeling methods and the modeling of the structural behavior of composite beams, including critical interfacial bond-slip behavior. It covers a new family of composite beam elements developed by the authors. Other sections cover nonlinear finite element analysis procedures and the numerical modeling techniques used in commercial finite element software that will be of particular interest to engineers and researchers executing numerical simulations.
Gives advanced methods and techniques for the analysis of composite and fiber Reinforced Plastic (FRP) and reinforced concrete beams
Presents new composite beam elements developed by the authors
Introduces numerical techniques for the development of effective finite element models using commercial software
Discusses the critical issues encountered in structural analysis
Maintains a clear focus on advanced numerical modeling
Автор: Rasheed, Hayder A. Название: Strengthening design of reinforced concrete with frp ISBN: 1482235587 ISBN-13(EAN): 9781482235586 Издательство: Taylor&Francis Рейтинг: Цена: 24499.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
Strengthening Design of Reinforced Concrete with FRP establishes the art and science of strengthening design of reinforced concrete with fiber-reinforced polymer (FRP) beyond the abstract nature of the design guidelines from Canada (ISIS Canada 2001), Europe (FIB Task Group 9.3 2001), and the United States (ACI 440.2R-08). Evolved from thorough class notes used to teach a graduate course at Kansas State University, this comprehensive textbook:
Addresses material characterization, flexural strengthening of beams and slabs, shear strengthening of beams, and confinement strengthening of columns
Discusses the installation and inspection of FRP as externally bonded (EB) or near-surface-mounted (NSM) composite systems for concrete members
Contains shear design examples and design examples for each flexural failure mode independently, with comparisons to actual experimental capacity
Presents innovative design aids based on ACI 440 code provisions and hand calculations for confinement design interaction diagrams of columns
Includes extensive end-of-chapter questions, references for further study, and a solutions manual with qualifying course adoption
Delivering a detailed introduction to FRP strengthening design, Strengthening Design of Reinforced Concrete with FRP offers a depth of coverage ideal for senior-level undergraduate, master's-level, and doctoral-level graduate civil engineering courses.
Автор: Oehlers, Deric J. , Bradford, Mark A. Название: Elementary Behaviour of Composite Steel and Concrete Structural Members ISBN: 0367091828 ISBN-13(EAN): 9780367091828 Издательство: Taylor&Francis Рейтинг: Цена: 17609.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This book is aimed at developing the elementary analysis skills, familiarity and intuitive feel for composite construction that is required by undergraduate and graduate students, and by structural engineers. It does not require a prior knowledge of advanced analysis and design techniques, but builds on simple concepts such as statics and the mechanics of materials. A topic is first introduced by a brief description, with numerous carefully-chosen examples forming an integral part of the main text. Working through the examples allows the reader to gain a full understanding of the subject, as a technique is illustrated by its application to the design of new structures, or the important area of assessing and upgrading existing structures.The techniques described for the analysis of standard structures form a basis for understanding the way composite structures work, and these techniques are applied to many non-standard forms of composite construction that are rarely covered in national standards, if at all. The book is an essential purchase for all undergraduate and postgraduate students of structural and civil engineering, as well as all practitioners.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
