Metallurgical Applications of Shock-Wave and High-Strain Rate Phenomena, Faulkner, Lynn
Автор: R. Rohde Название: Metallurgical Effects at High Strain Rates ISBN: 1461586984 ISBN-13(EAN): 9781461586982 Издательство: Springer Рейтинг: Цена: 18284.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: A conference on Metallurgical Effects at High Strain Rates was held at Albuquerque, New Mexico, February 5 through 8, 1973, under joint sponsorship of Sandia Laboratories and the Physical Metallurgy Committee of The Metallurgical Society of AIME.
Автор: Jiann-Yang Hwang; Tao Jiang; Mark William Kennedy; Название: 8th International Symposium on High-Temperature Metallurgical Processing ISBN: 3319513397 ISBN-13(EAN): 9783319513393 Издательство: Springer Рейтинг: Цена: 34937.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This collection features contributions covering the advances and developments of new high-temperature metallurgical technologies and their applications to the areas of: processing of minerals;
Автор: Vaikuntam Iyer Lakshmanan; Raja Roy; V. Ramachandr Название: Innovative Process Development in Metallurgical Industry ISBN: 331935440X ISBN-13(EAN): 9783319354408 Издательство: Springer Рейтинг: Цена: 23508.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
1. The Need for Process Innovation.- Part I-Separation Processes and Process Selection.- 2. Physical Processing - Innovations in Mineral Processing Process Development.- 3. Thermal Processing - Pyrometallurgy - Non-Ferrous.- 4. Thermal Processing - Pyrometallurgy -Ferrous.- 5. Chemical Processing - Hydrometallurgy.- 6. Biological Processing.- 7. Process Compression.- 8. Process Selection.- 9. Metallurgical Processing Innovations: Intellectual Property Perspectives and Management.- Part II -Process Development.- Chapter 10 Conceptual idea, Test work, Design, Commissioning and Troubleshooting.- Part III - Process Optimization.- Chapter 11- An Integrated Mining & Metallurgical Enterprise Enabling Continuous Process Optimization.- Part IV - Equipment.- Chapter 12- Equipment Development, Design and Optimization.- Part V Sustainable Development and Environmental Management.- Chapter 13- Sustainability Considerations in Innovative Process Development.- Part VI Steps to Commercialization.- Chapter 14-Process Development, Execution, Owner's responsibility and Examples of Innovative Developments.- Part VII - Financing.- Chapter 15 - Investing, financing and harvesting innovation and technology.- Part VIII Case Study Examples.- 16.Innovative case study processes in extractive metallurgy.- 17. Development of a New Technology for Converting Iron-bearing materials to Nodular Reduced Iron.- 18. Innovative process for the production of Titanium dioxide.- 19. Innovative Processes In Electrometallurgy.- 20. Innovations In Gold and Silver Processing.- 21. Innovative Processes for By-Product Recovery and its applications.- 22. Conclusion. Process Optimization.- Equipment Selection, Design, Development and Optimization.- By-Product Production.- Environmental Management.- Steps to Commercialization.- Case Study examples.
Описание: In recent years, global metallurgical industries have experienced fast and prosperous growth. High-temperature metallurgical technology is the backbone to support the technical, environmental, and economical needs for this growth. This collection features contributions covering the advancements and developments of new high-temperature metallurgical technologies and their applications to the areas of processing of minerals; extraction of metals; preparation of refractory and ceramic materials; sintering and synthesis of fine particles; treatment and recycling of slag and wastes; and saving of energy and protection of environment. The volume will have a broad impact on the academics and professionals serving the metallurgical industries around the world.
Автор: Watanabe, Tohru Название: Nano-Plating (Ii) ISBN: 0128218452 ISBN-13(EAN): 9780128218457 Издательство: Elsevier Science Рейтинг: Цена: 34360.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Nano Plating (II): A Metallurgical Approach to Electrochemical Theory and Its Applications to Technology is the result of the author's 50 years of research. The author reviews the vast experimental results of electrochemical phenomena in light of metallurgical knowledge and proposes theories that can give new insights in electrochemical thermodynamics and predict many phenomena in this field. The book complements Tohru Watanabe's previous book on nano-plating published by Elsevier in 2004.
Описание: This book discusses the intelligent optimization and control of complex metallurgical processes, including intelligent optimization and control of raw-material proportioning processes, coking process, and reheating furnaces;
Описание: In recent years, global metallurgical industries have experienced fast and prosperous growth. This collection features contributions covering the advancements and developments of new high-temperature metallurgical technologies and their applications to the areas of processing of minerals;
Автор: Jiann-Yang Hwang; Tao Jiang; Chris Pistorius; Gera Название: 7th International Symposium on High-Temperature Metallurgical Processing ISBN: 3319486179 ISBN-13(EAN): 9783319486178 Издательство: Springer Рейтинг: Цена: 30606.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: Flash Reduction of Magnetite and Hematite Concentrates with Hydrogen in a Lab-Scale Reactor for a Novel Ironmaking Process.- Investigation of Coal Tar Pitch Binder for the Production of Formed Coal Briquettes for COREX from High Volatile Coal Powder.- Upgrading of Iron-Rich Titanium Minerals Using a Molten Salt Process.- Direct Electrolytic Production of Mo-Si-Ti-C Composites from Their Oxides/Sulfide/Carbon Mixture Precursor in Molten Salt.- Reduction Kinetics of Magnetite Concentrate Particles with H2 + CO at 1200 to 1600 C Relevant to a Novel Ironmaking Process.- Advanced Oxygen Lances for Safer Furnace Tapping Operations.- Utilization of Pine Nut Shell for Preparation of High Surface Area Activated Carbon by Microwave Heating and KOH Activation.- Research on High Temperature Mechanical Properties of 50Cr5MoV Roll Steel.- Separation of Rhenium and Molybdenum from Molybdenite Concentrate by Microwave-Assisted Roasting.- Active Oxidation and Fume Formation from Liquid SiMn.- Research on Enrichment of MFe and RO Phase from Converter Steel Slag by Super Gravity.- Volatilization of Rhenium from Molybdenite Concentrate by Oxidative Roasting.- Kinetic Investigation of the Electric Furnace Copper Slag Treatment.- The Extraction of Zinc from Willemite by Calcified-Roasting and Ammonia-Leaching Process Based on Phase Reconstruction.- An Investigation on Antimony Production by Using Niederschlag Process.- Oxygen-Rich Side Blow Bath Smelting Technology - New Developments in China.- Carbon Refractories in an Oxidizing Process? Copper Smelting in an Outotec(R) Ausmelt TSL Furnace with a UCAR(R) ChillKote(TM) Refractory System.- Enrichment of Gold in Low Grade Copper Matte from Arsenical Refractory Gold Concentrate via Matte Smelting Method.- Zinc and Refractories - A Nasty Relation.- Preliminary Study on Preparation of Al-Sc Master Alloy in Na3AlF6-K3AlF6-AlF3 Melt.- Effect of the Reductants on the Production of Iron Based Alloys from Mill Scale by Metallothermic Process.- Experimental Study on Iron-Based Alloy as Cladding Layer-Improving High Temperature Oxidation Resistance of Furnace Alloy.- Production of FeMn Alloys with Heat Treated Mn-Nodules.- Thermodynamic Analysis and Experiments on Vacuum Separation of Sn-Sb Alloy.- Simulation of Solidification Microstructure of 30Cr2Ni4MoV Steel Ingot under Different Intensities of Mechanical Oscillation.- Production of ZrB2-B4C Composite Materials via SHS Process.- Research on Microwave Roasting of ZnO and Application in Photocatalysis.- Reduction Kinetics of Hematite Concentrate Particles by CO+H2 Mixture Relevant to a Novel Flash Ironmaking Process.- SO3 Formation in Copper Smelting Process: Thermodynamic Consideration.- Effect of Oxidation on Wetting Behavior between Silicon and Silicon Carbide.- Effect of CaO/SiO2 and P2O5 on the Viscosity of FeO-SiO2-V2O3-CaO-P2O5 Slags.- Heat Losses to Furnace Coolers as a Function of Process Intensity.- Viscosity of Partially Crystallized BOF Slag.- Origin and Evolution of Non-Metallic Inclusions for Al-Killed Steel during EAF-LF-VD-CC Process.- The Dynamic Dissolution of Coke with Slag in Melting and Dropping Zone.- Research on Oxidation Kinetics of SPHC Steel at 500 900 C.- Experiment Research on Direct Reduction of Celestine by Rotary Hearth Furnace Process.- Influence of Slag Basicity on the Silicon Within the Stainless Steel Master Alloy Prepared by Smelting Reduction of Fe-Ni-Cr Sinters.- Reduction Behavior of Chromic Oxide in Ti-Bearing BF Slag.- Effects of Mineral Oxides on the Precipitation Micro-Morphology of Metallic Iron in the Reduction of Iron Oxides Under CO Atmosphere.- Influence of Operation Parameters on Mass Fraction of Sulfur in the Hot Metal in COREX Process.- Influence of Operation Parameters on Sticking Behavior of Pellets in CO
In recent years, global metallurgical industries have experienced fast and prosperous growth. High-temperature metallurgical technology is the backbone to support the technical, environmental, and economical needs for the growth. This collection features contributions covering the advancements and developments of new high-temperature metallurgical technologies and their applications to the areas of processing of minerals; extraction of metals; preparation of metallic, refractory and ceramic materials; treatment and recycling of slag and wastes; and saving of energy and protection of environment.The volume will have a broad impact on the academics and professionals serving the metallurgical industries around the world.
Автор: Hwang Jiann-Yang, Jiang Tao, Kennedy Mark William Название: 8th International Symposium on High-Temperature Metallurgical Processing ISBN: 3319846256 ISBN-13(EAN): 9783319846255 Издательство: Springer Рейтинг: Цена: 27950.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание: This collection features contributions covering the advances and developments of new high-temperature metallurgical technologies and their applications to the areas of: processing of minerals;
Автор: Jiann-Yang Hwang; Tao Jiang; Mark William Kennedy; Название: 9th International Symposium on High-Temperature Metallurgical Processing ISBN: 3319891472 ISBN-13(EAN): 9783319891477 Издательство: Springer Рейтинг: Цена: 30606.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
Описание:
In recent years, global metallurgical industries have experienced fast and prosperous growth. High-temperature metallurgical technology is the backbone to support the technical, environmental, and economical needs for the growth. This collection features contributions covering the advancements and developments of new high-temperature metallurgical technologies and their applications to the areas of processing of minerals; extraction of metals; preparation of metallic, refractory and ceramic materials; treatment and recycling of slag and wastes; and saving of energy and protection of environment.The volume will have a broad impact on the academics and professionals serving the metallurgical industries around the world.
Автор: Tao Jiang; Jiann-Yang Hwang; Gerardo Alvear; Onura Название: 6th International Symposium on High-Temperature Metallurgical Processing ISBN: 3319486039 ISBN-13(EAN): 9783319486031 Издательство: Springer Рейтинг: Цена: 30606.00 р. Наличие на складе: Есть у поставщика Поставка под заказ.
ООО "Логосфера " Тел:+7(495) 980-12-10 www.logobook.ru
