Part I: Mechanism and advanced mechanical design.- A study of structural stress analysis of reducers for supporting reliability design, by Yuo-Tern Tsai, Kuan-Hong Lin, Kuo-Shong Wang.- Structural and Dimensional Synthesis of Parallel Mechanism with Two End-Effectors, by Zh. Baigunchekov, M. Kalimoldaev, M. Utenov, B. Arymbekov, N. Baigunchekov.- Parametric Design Optimization of Two Link Robotic Manipulator, by F. Z. Baghli, L. El Bakkali, O. Hamdoun.- Investigation of the Behaviour of a new Miniature Carbon-Paraffin Phase-change Actuator, by P. Lazarou, C. Rotinat-Libersa.- Synthesis of driving mechanisms in robotics by combinatorial analysis method, by Peter Mitrouchev, Jingtao Chen, Frédéric Maffray, Yaqing Zheng.- Part II: Humanoid and legged robotics.- Design and experiments on a new humanoid robot: TIDOM, by A. Eon, P. Seguin, M. Arsicault, S. Zeghloul.- Experimental Inspiration and Rapid Prototyping of a novel Humanoid Torso, by D. Cafolla, M. Ceccarelli.- Design of Robots Used As Education Companion and Tutor, by Albert Causo, Giang Truong Vo, I-Ming Chen, Song Huat Yeo.- Walking of a biped robot balanced with a reciprocating torso, by Victor De-Léon-Gomez, J. Alfonso Pamanes, Victor Santibanez.- Part III: Parallel manipulators.- Determining the reachable workspace for 6-DOF Delta manipulators, by C. K. Huang, K. Y. Tsai.- A reconfiguration strategy of a parallel Delta-type robot to improve the kinematic performance, by A. L. Balmaceda-Santamaria, E. Castillo-Castaneda.- Workspace and Singularity analysis of a Delta like family robot, by R. Jha, D. Chablat, F. Rouillier, G. Moroz.- Optimal trajectory Planning of 3RRR Parallel Robot using ant colony algorithm, by O. Hamdoun, L. El Bakkali, F. Z. Baghli.- Part IV: Medical robotics I.- Force control implementation of a haptic device for medical use, by H. Saafi, M.A. Laribi, S. Zeghloul.- Integration of Automated Camera Steering for Robotic Single-Site Surgery, by Mohsen Zahiri, Carl A. Nelson, R. Gonzalo Garay-Romero, Dmitry Oleynikov.- Kinematic models of a new spherical parallel manipulator used as a master device, by H. Saafi, M.A. Laribi, M. Arsicault, S. Zeghloul.- Part V: Medical robotics II: Mechatronic device to assist therapies during hand fingers rehabilitation, by F. Aguilar-Pereyra, E. Castillo-Castaneda.- Mechanical Design of a Craniotomy Robotic Manipulator Based on Optimal Kinematic and Force Performance, by T. Essomba, C.-T. Wu, S.-T. Lee, C.-H. Kuo.- Dynamic Simulation of a Cable-Based Gait Training Machine, by H. Lamine, S. Bennour, L. Romdhane.- An in vivo experiment to assess the validity of the Log Linearized Hunt-Crossley model for contacts of robots with the human abdomen, by F. Courrèges, M. A. Laribi, M. Arsicault, S. Zeghloul.- Part VI: Control and vision; Real-time Reconstruction of Heightmaps from Images taken with a UAV, by Jose Gabriel Ramirez-Torres, Ander Larranaga-Cepeda.- A Human-Machine Interface with Unmanned Aerial Vehicles, by D. Soto-Gerrero, J.-G. Ramrez-Torres.- Design and Simulation of Robot Manipulator Position Control System based on Adaptive Fuzzy PID Controller, by F. Z. Baghli, L. El Bakkali.- Generating the optimum dynamic trajectory of a hybrid cable-serial robot, by M. Ismail, S. Lahouar, L. Romdhane.- An Integrated Software Package for Advanced Industrial Robot Application, by C. Liang, H. Yan, R. Li, I.-M. Chen, M.H. Ang Jr., Z. Huang.- Part VII: Advanced Robotics.- A method for the approximation of the multiple IK solutions of regular manipulators based on the uniqueness domains and using MLP, by Vassilis C. Moulianitis, Evgenios M. Kokkinopoulos, Nikos A. Aspragathos.- An Approach to Symbolical Formulation of Forward Kinematics of Serial Robots, by S. Krutikov.- Grasps Database Generator for Anthropomorphic Robotic Hands, by H. Mnyusiwalla, P. Vulliez, J.P. Gazeau, S. Zeghloul.- From human motion capture to industrial robot imitation, by P. Laguillaumie, M. A. Laribi, P. Seguin, P. Vulliez, A. De
Àâòîð: Feng Qiao; Srikanta Patnaik; John Wang Íàçâàíèå: Recent Developments in Mechatronics and Intelligent Robotics ISBN: 3319659774 ISBN-13(EAN): 9783319659770 Èçäàòåëüñòâî: Springer Ðåéòèíã: Öåíà: 27950.00 ð. Íàëè÷èå íà ñêëàäå: Åñòü ó ïîñòàâùèêà Ïîñòàâêà ïîä çàêàç.
Îïèñàíèå:
Modified Chaos Particle Swarm Algorithm using Interpolation of Zadoff-Chu Sequence.- Trajectory Generation and Optimization of Slider Crank for Servo Press Based on Bezier Curve Model and Genetic Algorithm.- Picture Reconstruction Optimization Using Neural Networks.- Development of a Wireless Security Monitoring System for CCEL.- A Gaussian-surface Fit to Oceanic Mesoscale Eddies.- Cilin-based Semantic Similarity Calculation of Chinese Words.- Fault diagnosis of rolling bearing based on information fusion.- Kinect Sensor-based Motion Control For Humanoid Robot Hands.
Îïèñàíèå: The field of mechatronics (which is the synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design of products and manufacturing processes) is gaining much attention in industries and academics.
Àâòîð: Habib & Davim Íàçâàíèå: Engineering Creative Design In Robotics And Mechatronics ISBN: 1466642254 ISBN-13(EAN): 9781466642256 Èçäàòåëüñòâî: Mare Nostrum (Eurospan) Ðåéòèíã: Öåíà: 28413.00 ð. Íàëè÷èå íà ñêëàäå: Åñòü ó ïîñòàâùèêà Ïîñòàâêà ïîä çàêàç.
Îïèñàíèå: <em>Engineering Creative Design in Robotics and Mechatronics</em> captures the latest research developments in the subject field of robotics and mechatronics and provides relevant theoretical knowledge in this field. Providing interdisciplinary development approaches, this reference source prepares students, scientists, and professional engineers with the latest research development to enhance their skills of innovative design capabilities.
Àâòîð: Keiichi Shirase; Seiji Aoyagi Íàçâàíèå: Service Robotics and Mechatronics ISBN: 1447157737 ISBN-13(EAN): 9781447157731 Èçäàòåëüñòâî: Springer Ðåéòèíã: Öåíà: 36197.00 ð. Íàëè÷èå íà ñêëàäå: Åñòü ó ïîñòàâùèêà Ïîñòàâêà ïîä çàêàç.
Àâòîð: Newton C. Braga Íàçâàíèå: Robotics, Mechatronics, and Artificial Intelligence, ISBN: 0750673893 ISBN-13(EAN): 9780750673891 Èçäàòåëüñòâî: Elsevier Science Ðåéòèíã: Öåíà: 6904.00 ð. Íàëè÷èå íà ñêëàäå: Åñòü ó ïîñòàâùèêà Ïîñòàâêà ïîä çàêàç.
Îïèñàíèå: Suitable for students of secondary school and amateur technology enthusiasts, this book simplifies the process of finding basic circuits to perform simple tasks, such as how to control a DC or step motor, and provides instruction on creating moving robotic parts, such as an `eye` or an `ear`.
Àâòîð: John Billingsley; Peter Brett Íàçâàíèå: Machine Vision and Mechatronics in Practice ISBN: 3662455137 ISBN-13(EAN): 9783662455135 Èçäàòåëüñòâî: Springer Ðåéòèíã: Öåíà: 19591.00 ð. Íàëè÷èå íà ñêëàäå: Åñòü ó ïîñòàâùèêà Ïîñòàâêà ïîä çàêàç.
Îïèñàíèå: The contributions for this book have been gathered over several years from conferences held in the series of Mechatronics and Machine Vision in Practice, the latest of which was held in Ankara, Turkey.
Îïèñàíèå: Mechatronics has evolved to attack and solve a variety of engineering problems, and there appears to be no end to its application. This book presents a combination of traditional engineering topics and modern technologies, integrated to stimulate advances in the analysis and design of electromechanical systems.
Àâòîð: Feng Qiao; Srikanta Patnaik; John Wang Íàçâàíèå: Recent Developments in Mechatronics and Intelligent Robotics ISBN: 3319709895 ISBN-13(EAN): 9783319709895 Èçäàòåëüñòâî: Springer Ðåéòèíã: Öåíà: 39130.00 ð. Íàëè÷èå íà ñêëàäå: Åñòü ó ïîñòàâùèêà Ïîñòàâêà ïîä çàêàç.
Îïèñàíèå: Modified Chaos Particle Swarm Algorithm using Interpolation of Zadoff-Chu Sequence.- Trajectory Generation and Optimization of Slider Crank for Servo Press Based on Bezier Curve Model and Genetic Algorithm.- Picture Reconstruction Optimization Using Neural Networks.- Development of a Wireless Security Monitoring System for CCEL.- A Gaussian-surface Fit to Oceanic Mesoscale Eddies.- Cilin-based Semantic Similarity Calculation of Chinese Words.- Fault diagnosis of rolling bearing based on information fusion.- Kinect Sensor-based Motion Control For Humanoid Robot Hands.
Part I: Mechanism and advanced mechanical design.- A study of structural stress analysis of reducers for supporting reliability design, by Yuo-Tern Tsai, Kuan-Hong Lin, Kuo-Shong Wang.- Structural and Dimensional Synthesis of Parallel Mechanism with Two End-Effectors, by Zh. Baigunchekov, M. Kalimoldaev, M. Utenov, B. Arymbekov, N. Baigunchekov.- Parametric Design Optimization of Two Link Robotic Manipulator, by F. Z. Baghli, L. El Bakkali, O. Hamdoun.- Investigation of the Behaviour of a new Miniature Carbon-Paraffin Phase-change Actuator, by P. Lazarou, C. Rotinat-Libersa.- Synthesis of driving mechanisms in robotics by combinatorial analysis method, by Peter Mitrouchev, Jingtao Chen, Frédéric Maffray, Yaqing Zheng.- Part II: Humanoid and legged robotics.- Design and experiments on a new humanoid robot: TIDOM, by A. Eon, P. Seguin, M. Arsicault, S. Zeghloul.- Experimental Inspiration and Rapid Prototyping of a novel Humanoid Torso, by D. Cafolla, M. Ceccarelli.- Design of Robots Used As Education Companion and Tutor, by Albert Causo, Giang Truong Vo, I-Ming Chen, Song Huat Yeo.- Walking of a biped robot balanced with a reciprocating torso, by Victor De-Léon-Gomez, J. Alfonso Pamanes, Victor Santibanez.- Part III: Parallel manipulators.- Determining the reachable workspace for 6-DOF Delta manipulators, by C. K. Huang, K. Y. Tsai.- A reconfiguration strategy of a parallel Delta-type robot to improve the kinematic performance, by A. L. Balmaceda-Santamaria, E. Castillo-Castaneda.- Workspace and Singularity analysis of a Delta like family robot, by R. Jha, D. Chablat, F. Rouillier, G. Moroz.- Optimal trajectory Planning of 3RRR Parallel Robot using ant colony algorithm, by O. Hamdoun, L. El Bakkali, F. Z. Baghli.- Part IV: Medical robotics I.- Force control implementation of a haptic device for medical use, by H. Saafi, M.A. Laribi, S. Zeghloul.- Integration of Automated Camera Steering for Robotic Single-Site Surgery, by Mohsen Zahiri, Carl A. Nelson, R. Gonzalo Garay-Romero, Dmitry Oleynikov.- Kinematic models of a new spherical parallel manipulator used as a master device, by H. Saafi, M.A. Laribi, M. Arsicault, S. Zeghloul.- Part V: Medical robotics II: Mechatronic device to assist therapies during hand fingers rehabilitation, by F. Aguilar-Pereyra, E. Castillo-Castaneda.- Mechanical Design of a Craniotomy Robotic Manipulator Based on Optimal Kinematic and Force Performance, by T. Essomba, C.-T. Wu, S.-T. Lee, C.-H. Kuo.- Dynamic Simulation of a Cable-Based Gait Training Machine, by H. Lamine, S. Bennour, L. Romdhane.- An in vivo experiment to assess the validity of the Log Linearized Hunt-Crossley model for contacts of robots with the human abdomen, by F. Courrèges, M. A. Laribi, M. Arsicault, S. Zeghloul.- Part VI: Control and vision; Real-time Reconstruction of Heightmaps from Images taken with a UAV, by Jose Gabriel Ramirez-Torres, Ander Larranaga-Cepeda.- A Human-Machine Interface with Unmanned Aerial Vehicles, by D. Soto-Gerrero, J.-G. Ramrez-Torres.- Design and Simulation of Robot Manipulator Position Control System based on Adaptive Fuzzy PID Controller, by F. Z. Baghli, L. El Bakkali.- Generating the optimum dynamic trajectory of a hybrid cable-serial robot, by M. Ismail, S. Lahouar, L. Romdhane.- An Integrated Software Package for Advanced Industrial Robot Application, by C. Liang, H. Yan, R. Li, I.-M. Chen, M.H. Ang Jr., Z. Huang.- Part VII: Advanced Robotics.- A method for the approximation of the multiple IK solutions of regular manipulators based on the uniqueness domains and using MLP, by Vassilis C. Moulianitis, Evgenios M. Kokkinopoulos, Nikos A. Aspragathos.- An Approach to Symbolical Formulation of Forward Kinematics of Serial Robots, by S. Krutikov.- Grasps Database Generator for Anthropomorphic Robotic Hands, by H. Mnyusiwalla, P. Vulliez, J.P. Gazeau, S. Zeghloul.- From human motion capture to industrial robot imitation, by P. Laguillaumie, M. A. Laribi, P. Seguin, P. Vulliez, A. De
Îïèñàíèå: Featuring selected contributions from the 2nd International Conference on Mechatronics and Robotics Engineering, held in Nice, France, February 18–19, 2016, this book introduces recent advances and state-of-the-art technologies in the field of advanced intelligent manufacturing. This systematic and carefully detailed collection provides a valuable reference source for mechanical engineering researchers who want to learn about the latest developments in advanced manufacturing and automation, readers from industry seeking potential solutions for their own applications, and those involved in the robotics and mechatronics industry.
Àâòîð: Billingsley Íàçâàíèå: Mechatronics and Machine Vision in Practice 3 ISBN: 3319769464 ISBN-13(EAN): 9783319769462 Èçäàòåëüñòâî: Springer Ðåéòèíã: Öåíà: 13974.00 ð. Íàëè÷èå íà ñêëàäå: Åñòü ó ïîñòàâùèêà Ïîñòàâêà ïîä çàêàç.
Îïèñàíèå: In contrast with previous books on mechatronics and machine vision in practice, a significant number of chapters focus on systems designed for human interaction and deciphering human motion.
